Question about Cars & Trucks
Had body control module replaced and now dvds in head rest say security error how do I fix this in my wl caprice
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Anti-Lock and Trac Off lights are lit on my 1999 Alero, as well. They usually come on after about 5 minutes of driving, but are not always on when I start the car.
Posted on Jan 16, 2009
Try cleaning the key and ignition switch with alcohol or electric contact cleaner. Try a different key if you have one. And GM's are known to have problems with the ignition cylinder and theft deterant system. A new ignition cylinder costs $280-$300. Sometimes you can turn the key to the run position wait ten minutes and then start it. Some people say you have to turn the cylinder to the off but not lock position before starting after waiting the ten minutes, but my sister didn't have to with her Malibu.
Posted on Feb 07, 2009
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
Posted on Mar 23, 2009
BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.
Posted on Jun 23, 2009
Tips for a great answer:
Jul 06, 2017 | Holden Cars & Trucks
Oct 17, 2016 | Holden Cars & Trucks
if you replaced the engine ECU you need to get it linked to the BCM (body control module) with a scan tool.
link ecm to bcm, in tech2 scan tool at holden dealers or a aftermarket workshop that has a scan tool that can do this eg snapon, G-scanner, etc.. ring around to some repair shops
May 04, 2013 | 1999 Holden VT
Aug 13, 2012 | Holden Caprice Cars & Trucks
May 12, 2010 | 1999 Oldsmobile Alero
Feb 24, 2010 | 1989 Chevrolet Caprice
Jan 04, 2010 | 2001 Buick Regal
32 people viewed this question
Usually answered in minutes!