Question about Mitsubishi Lancer
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Don't know the USA system but here in Europe the sister car with the same engine does 13 liters per 100 km on city, 9 l / 100 km on road and 12 l / 100 km on highway.
Posted on Oct 25, 2009
Testimonial: "thanks i think its round about that thanks"
Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Mar 25, 2010
Timing belt installation
1. Ensure locking bolts located correctly  &  in the picture below:
CS = Crankshaft
CA = Camshaft
IP = Injection Pump
2. Ensure timing marks aligned .
3. Fit timing belt in clockwise direction, starting at crankshaft sprocket.
NOTE: "ISUZU" lettering on belt should be readable from front of engine.
4. Slacken tensioner pulley bolt . Push tensioner pulley against belt.
5. Ensure belt is taut between injection pump sprocket and tensioner pulley as well as crankshaft sprocket and camshaft sprocket.
6. Position tensioner lever  against tensioner pulley housing.
7. Remove locking bolts from sprockets  & .
8. Apply a load of 10 ... 12 kg to tensioner lever. Use spring balance .
9. Tighten tensioner pulley bolt to 80 Nm.
10. Turn crankshaft slowly 45 degrees anti-clockwise. Use spring balance to tension belt.
11. Repeat tensioning procedure at 45 degrees intervals for one anti-clockwise turn of the crankshaft.
NOTE: DO NOT turn crankshaft clockwise during tensioning procedure!
12. Fit tensioner lever to original position. Tighten nuts .
13. Install: Injection Pump flange , Camshaft sprocket flange , and water pump pulley.
14. Install components in reverse order of removal & refill coolant.
PLEASE DO RATE MY RESPONSE. THANKS!
Posted on Nov 27, 2010
Tips for a great answer:
Apr 08, 2017 | Isuzu Cars & Trucks
Oct 30, 2015 | Isuzu Cars & Trucks
Sep 09, 2015 | Isuzu Cars & Trucks
Aug 12, 2012 | 1998 Isuzu Trooper
Mar 22, 2011 | Isuzu MU-7 Cars & Trucks
Nov 27, 2010 | 1996 Isuzu Trooper
Oct 25, 2009 | 2007 Isuzu MU-7
Jul 18, 2009 | 2007 Isuzu MU-7
Jan 16, 2018 | Mitsubishi Cars & Trucks
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: