Question about Volkswagen Cars & Trucks

Open Question

Lexus ls430 pivot side mirror loose

Side mirror pivot screw broken mirror sways

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: drivers side mirror loose folds all the way back towards front of car Power operated Lexus Ls 430

I already took care of the problem, Thanks for your concern.... Joe M...........

Posted on Apr 29, 2009

mkv0525
  • 358 Answers

SOURCE: my 1992 lexus sc300 pasenger side mirror is loose

there is a small screw on bottom side . sometimes you can snug it up some. very tight spot.

Posted on May 21, 2009

  • 51 Answers

SOURCE: my drivers side mirror was bumped and now does not line up?

if the glass is broken or need it replaced. You need to remove the door panel approx. five phillips head screws, remove the triangular plastic cover in the corner or the window. Remove the 3 ten mm bolts, if electrical mirror then disconnect and replace. The screws to remove the door are behind the handle, you need to pop uo the window control panel in the door and then search for the other screws. There are many clips along the door panel so some slight pulling is needed.

Posted on Oct 07, 2009

  • 70 Answers

SOURCE: which is bank 1 on a lexus ls430 year 2000. my

Bank 1 is on drivers side and has two sensors #1 and #2. The #1 is before catalytic converter and #2 is after.

Posted on Dec 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Lexus LS430 with easy locks. Driver side rear door comes open while driving


Check out spring housing inside the door lock actuator. I had the same problem, some work anf JB weld will fix it,

Jul 23, 2012 | 2006 Lexus Ls 430

1 Answer

My drivers side mirror was bumped and now does not line up?


if the glass is broken or need it replaced. You need to remove the door panel approx. five phillips head screws, remove the triangular plastic cover in the corner or the window. Remove the 3 ten mm bolts, if electrical mirror then disconnect and replace. The screws to remove the door are behind the handle, you need to pop uo the window control panel in the door and then search for the other screws. There are many clips along the door panel so some slight pulling is needed.

Sep 30, 2009 | 2004 Lexus LS 430

1 Answer

REPLACE HEADLAMP BULB 2001 LEXUS LS430


There is a clip that pries up with small flathead screwdriver. The harness and bulb are held in lens with a plastic ring that screws on and off.

Sep 15, 2009 | 2001 Lexus LS 430

1 Answer

Drivers side mirror loose folds all the way back towards front of car Power operated Lexus Ls 430


I already took care of the problem, Thanks for your concern.... Joe M...........

Apr 28, 2009 | Lexus LS 430 Cars & Trucks

3 Answers

How to locate the oxygen sensor in a LEXUS LS430 (Bank1 Sensor1)


the O2 sensor for bank one sensor one is located between the catalytic converter and the engine in the exhaust head pipe. see photo of your engine cylinder layout, the sensor u want to replace is the one at the cylinder #1 0aa2e73.gif bank on right.

Apr 15, 2009 | 2001 Lexus LS 430

1 Answer

My 1992 lexus sc300 pasenger side mirror is loose in it's pivot post.


there is a small screw on bottom side . sometimes you can snug it up some. very tight spot.

Apr 05, 2009 | 1992 Lexus Sc 300

1 Answer

2004 rx330 passenger side mirror wobbly


On the bottom of the mirror casing there are three screws - one visible and two hidden by a plastic panel. To open the plastic panel use a small knife or screwdriver and pop it open using the small **** on one edge of the panel. Careful - if one or both of the screws are completely loose, they will drop on the ground and most likely end up in that endless black hole where all those socks go when we wash them. ;)

Mar 19, 2009 | 2004 Lexus RX 330

2 Answers

How do i remove and replace the driver's side mirror?


If the metal pivot arm is not broken you can just replace the glass and plastic housing. To remove the glass you tilt the glass down towards the floor and use a wide plastic or wood bladed object to prise from behind, the glass should pop off from its clips. Remember to catch it if its not damaged. To remove the housing once the glass is out you need to look underneath the mirror unit, there you will find a small plastic bung, gently prise it out and then use a long small flat bladed screwdriver straight up inside the hole and lever towards the front of the car whilst lifting straight up on the plastic housing, this should then lift off. To replace just slot the new housing on and click into place then fit the glass back, remember to connect the wires first if it is a heated glass.
If the metal pivot arm is broken then you will find the remaining screws behind the plastic trim inside the vehicle.

Oct 26, 2008 | 1998 Volkswagen Beetle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...