Question about 2010 Chevrolet Traverse
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My niece has a jimmy, they should be the same. The inside should be the high beam, the outside the low, DO NOT TOUCH THE GLASS ON NEW BULBS! Oil will cook on them and pop them! Both come off the same way. Take off the big rubber thing. They are soft but over hard plastic. Just pull them off. If you have trouble, you can flip the little wire clips that hold the headlight housing in place, this will give you room to see the rubber caps enough to figure them out better. The bulb assembly rotates CCW counter clockwise, and should slip out easily. Take the wires and plug off. it should be obvious how it pulls off. Snap the new bulb into the wires without touching the glass part. Gently replace in backwards order as you removed it. Put the rubber caps on, they keep water off the bulbs. It will break them!
The passenger side was harder for me. I had to take the air cleaner off, the whole cover and filter.You should be able to see or feel the same type caps, The low beam outside, High beam inside. The same 2 wire clips are there to release the housing. Everything pretty much goes the same, other than the air cleaner has to be removed and replaced. And make sure the rubber cap is replaced! Good Luck and good motoring!
Posted on Dec 19, 2008
SOURCE: my head lights are not working?
A 99 Tahoe has separate bulbs for the High and Low beam. Low beam bulbs are used more frequently than the the High so they burn out first.
Posted on Apr 07, 2009
If you are absolutely certain the bulbs are okay, then change the switch. I would check for power at the socket first, to make sure it isn't bulbs.
Posted on Jul 25, 2009
Tips for a great answer:
Dec 29, 2013 | 1997 Chevrolet Blazer
Sep 27, 2012 | Cars & Trucks
Jul 14, 2011 | Volkswagen Beetle Cars & Trucks
Dec 24, 2010 | GMC Safari Cars & Trucks
Jan 01, 2010 | 2003 Honda Pilot
Nov 10, 2009 | 1998 Ford Escort
Dec 31, 2008 | 2003 Ford Taurus
Jun 02, 2008 | 1999 Chevrolet Astro
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: