Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
do you mean P0171??
If so, then it means your MAF sensor may be dirty and needs to either be cleaned or replaced.
It could also mean there's a vacuum leak downstream of the MAF sensor
Posted on Oct 13, 2009
Testimonial: "Confirmed what I suspected. Thanks, Lesjude"
I would check that spark plug, and have that coil checked or replaced. Also check for any vacuum hose leaks in the area of the cylinder.
Posted on May 12, 2010
SOURCE: my nissan sentra 2003 is
Replace just the TPS Sensor (throttle position),
not the entire throttle body, as you may have been told
Be careful,you will be sold something
you don't need
Posted on Feb 14, 2011
p1320 is a ignition primary signal code. you may need ignition coils. not a common issue on a 2000 sentra, but depending on milage you may need coils. unfortunatelly you dont have a specific cylinder number code stored such as p0301 which is number 1 cylinder misfire and so on in your case p0301 to p0304 because its a 4 cylinder vehicle. with the p1320 its usually the whole set of 4 coils.
Posted on Jul 14, 2011
Tips for a great answer:
Jan 23, 2016 | Nissan Cars & Trucks
Jan 01, 2016 | 2005 Nissan Sentra 1.8
Oct 21, 2015 | Nissan Cars & Trucks
Sep 16, 2011 | 2002 Nissan Sentra
Jul 12, 2011 | 2000 Nissan Sentra
A/T Diagnosis Communication Line Malfunction Possible Causes:
Trouble Code: P0100
Mass Airflow Sensor Circuit Malfunction
Air Intake leaks located after the MAF sensor assembly MAF sensor signal circuit is open, shorted to ground or power MAF sensor has failed PCM has failed
Trouble Code: P1605
TCM communication line circuit is open or shorted to ground TCM communication line circuit shorted to VREF or power (B+) TCM or PCM has failed TSB 01-004 (01/01) contains information related to this code
For the P0100, check the connector on top of the MAF sesnor for looseness or corrosion. Connector is on top in piocture below.
A/T Diagnosis Communication Line Malfunction
Mar 25, 2011 | 2000 Nissan Sentra
Feb 17, 2011 | 2000 Nissan Sentra
Feb 14, 2011 | 2003 Nissan Sentra
Dec 18, 2010 | 2000 Nissan Sentra
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: