Question about Cars & Trucks

Open Question

Bonnet release cable on my 406 coupe it releases when i pull the catch in the car but it wnt let me open bonnet how do i fix this

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to open the bonnet of a Daewoo Matiz SE

Loo between both light in the long **** shape gap just below where the bonnet is. If you look to the right, you should see a black cable hanging down. If not the it has snapped away, but if you can. Here is what you can to to open the bonnet. Use a long pair of plires and gab the cable. When you have a good grip, pull the cable firmly to the right (passenger side light). This should open the bonnet. It has worked for me....

Hope this helps

Posted on May 10, 2009

defadad
  • 351 Answers

SOURCE: hood release will not release hood cable is not broken

the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet

Posted on May 23, 2009

  • 2 Answers

SOURCE: renault clio bonnet wont open

Get a second person to pull bonnet catch and you push up and down on the bonnet whilst catch is being pulled. 1, cable possibly stretched, 2, look at bonnet catch under the coloum to see if wire is attached, 3, try and lie under car and look up the back of the bulkhead to see the catch and release it manually. Hope that helps.

Posted on Aug 17, 2009

  • 1 Answer

SOURCE: Bonnet release cable is broken - how do I open the

remove the o/s/f indicator this can be done by putting a thin screw driver between the bonnet and wing to push the indicator release tab down. once the indicator is out of the way you can see the bonnet catch behind the headlamp use a torch to locate where the cable should be and pull the latch towards you. it should take you about 10 mins to do this

Posted on Nov 30, 2009

  • 1 Answer

SOURCE: ford focus 56year key wont open bonnet stripped

I also have the same problem with a 2007 ford focus. I have been informed that it is a common problem and that the barrel needs to be changed. I believe it is necessary to open the bonnet by trying to remove the panel/ covers from under the front bumper. I managed to get the panel off by removing about 8 screws but I was still unable to open the bonnet.
If you have any luck, would you please respond.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix broken bonnet cable on s type jaguar 2003 model


You will need to reach up from underneath and either locate the latch and pull it or grip the cable near the latch and pull that to try and release the bonnet catch!

May 09, 2015 | 2003 Jaguar S-Type

2 Answers

PLEASE HELP! MY HOOD WILL NOT OPEN. HOW DO I GET IT OPEN? I HAVE TRIED THE HOOD RELEASE UNDER DASH & IN FRONT GRILLE


do you know were the cable has snapped front or cab ?
cab you need to use a pair of plyers, front snapped.bit more tricky. and its going to cost you a bit more to just get to the cable and you will need to replace parts on the front.

Feb 23, 2014 | Mercedes-Benz S-Class Cars & Trucks

2 Answers

Hi, I have a 1995 Audi coupe, the bonnet is stuck on one side so when I pull the bonnet release the bonnet only pops up on one side. any ideas? thanks


get somone to push down on the bonnet and pull it up while u pull the relise handle. if dont work then strip the front grill and u should be able to open the catch manualy

Jul 10, 2013 | Cars & Trucks

1 Answer

Im having a problem opening my hood on my 2000 land rover dis 1


You don't specify whether its just that you can't find the release catch, or whether the release catch is stuck / broken,

In the UK (Right hand drive car) the release catch is situated in the left (passenger side) footwell, within about a foot of the lower front door hinge. In a Left Hand Drive car, I guess this would be reversed (i.e. right hand side footwell). Pull, and it semi releases the hood. Next, walk to the front of the car, pull the hood up about 1" and insert your fingers about a foot left of center. Sweep to the right, and you'll release the secondary catch and the hood will be open.

However, if its stuck / broken, then ......

You need to work underneath the front of the vehicle - the idea is to get at the catch and release it with a long screwdriver flicking the catch to open the bonnet -or getting a grip of the cable if it is hanging loose ( i.e. broken ) then getting a grip of the cable with mole grips or even pliers - to pull and release the cable / bonnet.

Once the bonnet is open - you can deal with renewing the cable assembly, or greasing it thoroughly.

Feb 21, 2010 | 2002 Land Rover Freelander

1 Answer

On Pulling Release handle in drivers footwell. No resistence is felt. suspected broken cable. Require a method of releasing bonnet catch or gaining access to cable locations .


REMOVED PANEL FROM UNDER THE BUMPER AND REACHED UP TO THE TOP OF BONNET AND LOCATED CABLE. PULLED ON CABLE WHILST 3RD PARTY PULLED BONNET LEVER IN DRIVERS FOOTWELL. BONNET RELEASED.

Jan 08, 2010 | 2003 BMW 7 Series

1 Answer

The pass. side bonnet catch will not release and open the bonnet.


Have someone lift on the bonnet while you pull the release handle.

Nov 06, 2009 | 1997 Mercedes-Benz E-Class

1 Answer

Renault clio bonnet wont open


Get a second person to pull bonnet catch and you push up and down on the bonnet whilst catch is being pulled. 1, cable possibly stretched, 2, look at bonnet catch under the coloum to see if wire is attached, 3, try and lie under car and look up the back of the bulkhead to see the catch and release it manually. Hope that helps.

Aug 17, 2009 | 2004 Volkswagen Golf

3 Answers

Bonnet cable snapped, need advice on how to open bonnet


Most of the time the cable snaps at the release handle. If you remove the handle and get the end of the cable, you can cut off the cable jacket and use needle nose pliers or vise grips to grab the cable and pull to release bonnet.

May 21, 2009 | 2001 Audi A4

1 Answer

Bonnet release cable is broken - how do I open the bonnet. A photo of where the catches are would help


remove the o/s/f indicator this can be done by putting a thin screw driver between the bonnet and wing to push the indicator release tab down. once the indicator is out of the way you can see the bonnet catch behind the headlamp use a torch to locate where the cable should be and pull the latch towards you. it should take you about 10 mins to do this

Mar 11, 2009 | 2004 Volvo C70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...