Question about 2005 Buick LaCrosse CXL
Location of coolant temp.sensor
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there should be 2 brackets at the rear of bulb housing, 1 may have a small bolt.....lift these up and the headlamp housing should come out. you will see how it works when you get it apart.
Posted on Oct 09, 2009
Both my remotes no longer work. I will be ordering new ones off Ebay and having my dealer program them. New ones from Buick are very pricey.
Posted on Oct 20, 2009
The front spark plugs should not be a problem. The rear are accessed with use of an "engine tilter". It can be purchased at many auto parts businesses, I purchased mine from NAPA. However, you may have to order one on-line as it is "an unknown item" as many of us are unaware that it even exists and I am sure that the mechanics and techs want to keep it that way. My cost in 2009 was in the $35 to $80 range for the tilter. It may sound a little scarry using it because you loosen the upper (literally right up on top where they are most easily accessed) mounts, but it is easy. I found that no electrical, air flow from filter, exhaust, etc., had to be loosened or removed. You only remove one side and install the tilter. Next you adjust the "tilter" to remove tension on the other bolt. Finally, simply screw the adjuster toward the front of car until you either have enough room to access the rear plugs or until you run out of bolt threads at which point you have as much room to do the job as any tech/mechanic. As usual, remove the old plugs (I only do one at a time which also eliminates crossing plug wires) and screw the new ones in several turns by hand to make sure that there is no cross threading. Once you are satisfied with your level of maintenance, simply adjust the "tilter" back to a point where the loose motor mount accepts the bolt to front frame, tighten it, remove the "tilter" and reinstall the second bolt. It really is that easy, but you will want to protect your paint with a proper cover as you do have to lean heavily against the fender or fenders. Oh, by the way, many mechanics skip the difficult-to-access plugs, knowing that when they, or it fails, you will be back. Enjoy, you will feel like a real pro, knowing that your job was done correctly and is complete!!!
Posted on Mar 02, 2011
Tips for a great answer:
Jun 26, 2017 | Buick Cars & Trucks
Apr 01, 2017 | 2005 Buick LaCrosse CXL
Mar 31, 2017 | 2005 Buick LaCrosse CXL
Feb 10, 2017 | 2003 Dodge Neon
Dec 11, 2016 | Mazda B2300 Cars & Trucks
Jun 15, 2016 | Buick Cars & Trucks
Feb 26, 2016 | 2006 Buick LaCrosse CXL
Nov 12, 2015 | 2010 Buick LaCrosse CXL
Jan 06, 2015 | 2002 Hyundai Santa Fe
Oct 22, 2014 | 1998 Isuzu Amigo
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: