Question about Cars & Trucks

Open Question

2010 international prostar with isx oil pressure sending unit location

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Pontiac Bonneville(2000) oil pressure sending unit

The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.

Posted on Feb 02, 2009

Ad
  • 24 Answers

SOURCE: where is the sending unit located?

On most GM V6/V8 engines the oil sending unit is on top of the engine near the firewall possibly under/behind the distributor. Look at the extreme rear of the intake manifold. On some others it is mounted near the oil filter. If you have a light it will just be a single wire. If you have a true gauge it may have a very small hose/line connected to it.

Posted on Feb 09, 2009

farroutideas
  • 78 Answers

SOURCE: oil pressure sending unit

Hi there;

Your looking foer the oil pressure sensor on the 2004 8.1L.
You will find it located directly behind the EGR valve threaded into the block just to the drivers side of the center bolt for the transmission to block connection.

Thanks
Farrout!

Posted on Mar 17, 2009

  • 118 Answers

SOURCE: where is the oil pressure sending unit located?

The pressure sending unit is located on the passenger side rear of the engine just above and slightly to the left of the filter and filter housing.

Posted on Aug 01, 2009

  • 1986 Answers

SOURCE: I keep getting a stop engine low oil pressure

Just wondering if you put in the correct amount of oil and tightened everything back up properly...

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure sending unit on a 2010 chevy camero


Sometimes your Auto Parts Store has more answers than you think...Ask to see this unit at your store...compare it to what is under your hood...usually located beside the oil filter...are you having instrument problems?

Dec 10, 2014 | Cars & Trucks

2 Answers

Location of oil sending unit on 1990 ranger 2.9


Here's a link to your oil pressure switch,here's the part.As you can see there are 2 types,one for light and one for gauge.
  • When the oil pressure is either high or low it will either turn the oil light "on" in the dash or move the gauge to the extremes
  • Undetected high or low oil pressure can result in internal engine damage and/or gasket leakage

Apr 17, 2013 | Cars & Trucks

1 Answer

I need to replace the oil sender switch on my 2002 Buick La Sabre


first need to buy oil pressure sending unit 3/8 deep socket remove oil pressure sending unit you need teflon tap sealer for oil sending unit threads.okay to replace oil pressure sending unit.you need safe raise support vechicle locate oil pressure sending unit next to the oil filter.disconnect oil pressure sending unit wire connector then use oil pressure sending unit 3/8 socket remove the sending unit.then take new oil pressure sending unit use teflon tape white plumbers tape or use thread sealer apply to the oil pressure sending unit threads then install new oil pressure sending unit and reconnect electrical connector to sending unit.then crank engine check for oil leak if all is good lower vechicle back to ground wait several minutes check engine oil level.you good to roll.

Feb 09, 2013 | 2002 Buick LeSabre

3 Answers

My 04 XTerra's oil light keeps coming on but there is oil in the car....not overheating, driving okay??? I am perplexed.


1st you need to do an oil pressure test. If it reads between 20psi-60psi, then it's Ok and you have a bad oil pressure switch. If it's below the above specs then you have an internal engine problem - IE: bad oil pump, bad bearing, etc...

Mar 12, 2011 | 2004 Nissan XTerra

1 Answer

Oil pressure bounces from 0 to 40 when below 800 rpm where is oil pump located internal or external?


the oil pump is internal in the oil pan. this maybe a bad sending unit on the motor or guage. I wouold check the sending unit first.

Sep 28, 2009 | 1995 Dodge Ram

2 Answers

Pontiac Bonneville(2000) oil pressure sending unit


The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.

Jan 24, 2009 | 2000 Pontiac Bonneville

2 Answers

Fluctuation on the oil pressure gauge reading


The oil pressure sending unit is a sensor with an internal diaphragm, if the internal diaphragm is damaged , or the line to the diaphragm is blocked you can get this kind of fluctuation on the oil pressure gauge.

The oil pressure value must be read by installing a mechanical gauge near to the oil pressure switch and checking the pressure.

If pressure is ok, replace the sending unit. If there is a real pressure drop, check the oil pump.

If you still get fluctualtion after replacing the oil pressure sending unit, replace the oil pressure gauge.

Nov 24, 2008 | 2003 Toyota Sequoia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...