Question about Cars & Trucks

Open Question

What level resistance to achieve 2 kiloponds or 20 newtons

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gas gauge in my 2002 Pontiac Bonnivile shows empty all the time


Fuel Gauge Troubleshooting

Fuel Gage
The IPC displays the fuel level as determined by the PCM. The IPC receives a class 2 message from the PCM indicating the fuel level percent. The fuel gage defaults to empty if:
• The PCM detects a malfunction in the fuel level sensor circuit.
• The IPC detects a loss of class 2 communications with the PCM.
When the fuel level is less than a pre-determined value, the CHECK GAGES indicator illuminates.
DTC P0462
The fuel level sensor changes resistance based on fuel level. The PCM monitors the signal circuit of the fuel level sensor in order to determine fuel level. When the fuel tank is full, the sensor resistance is high and the PCM senses a high signal voltage. When the fuel tank is empty, the sensor resistance is low and the PCM senses a low signal voltage. The PCM uses the signal circuit of the fuel level sensor in order to calculate the total remaining fuel (%) in the tank. The PCM sends the fuel level percent via the class 2 serial data circuit to the IPC in order to control the fuel gage. The fuel level information is also used for misfire and EVAP diagnostics
DTC P0463 (3.8L)

How to test fuel gauge tank sending unit P0463 GM

Mar 29, 2017 | 2002 Pontiac Bonneville

2 Answers

How long does it take to get an answer ?


Usually within an hour if the right experts are around. However we get lots of questions from non English speakers that are hard to understand and they are unlikely to be answered. Your question was straightforward and has been answered.


richie46
  • Level 3: An expert who has achieved level 3 by getting 1000 points
    Superstar: An expert that got 20 achievements.
    All-Star: An expert that got 10 achievements.
    MVP: An expert that got 5 achievements.
  • Pontiac Master
  • 5,632 Answers
Re: I just would like to know how many bolts/nuts secure... Most cars have two - one to hold unit in place and the other on an arm that you can adjust the position and tighten the belt around the pulley to specs.

Posted on Sep 14, 2016

Sep 14, 2016 | Cars & Trucks

1 Answer

Main bearing cap bolt torque specs for a 1999 2.0 Ford engine


See #1; Main bearing diagram
See #2; NM conversion chart

  1. NOTE: The crankshaft must rotate freely; if necessary check and adjust the bearing clearances.Tighten the main bearings and connecting rod bearings.
    1. Tighten the main bearing bolts in two stages.
    • Stage 1: 25 Nm.
    • Stage 2: 60 degrees.
    1. Tighten the connecting rod bearing bolts in two stages.
    • Stage 1: 25 Nm.
    • Stage 2: 90 degrees.






# 2) Newton Meters conversion chart:
http://extraconversion.com/energy/newton-meters/newton-meters-to-foot-pounds.html

#1)
25730427-ddvrxh52bv4dwu240r4mw22m-2-0.gif saailer

Jun 05, 2015 | Ford Cars & Trucks

1 Answer

What are isaac newtons achievments


Sir Isaac Newton is best known for his work on gravity. He also worked on and discovered many other scientific wonders during his lifetime (1642-1727). His work in physics was so advanced that he was the first scientist to be knighted, which is a great honor in England and the reason "Sir" preceeds his name.

May 28, 2015 | Cars & Trucks

1 Answer

Engine bogs under load with p0300 code engine revs up with no increase in speed


Aluminum heads should have a small amount of anti-seize on the threads of each plug and then be torqued to 20 Newton Meters. That's assuming these are 14mm plugs.

Jan 24, 2015 | Cars & Trucks

1 Answer

What causes obd code u110c


U110C-NO FUEL LEVEL BUS MESSAGE
When Monitored and Set Condition:
U110C-NO FUEL LEVEL BUS MESSAGE
When Monitored: Ignition on.
Set Condition: No fuel level BUS messages received by the PCM for 20 seconds.
POSSIBLE CAUSES
DTC RESET
COMMUNICATE WITH BCM
FUEL LEVEL BUS MESSAGE
PCI BUS CIRCUIT OPEN FROM PCM TO BCM
BCM
TEST ACTION APPLICABILITY
1 NOTE: If a fuel level circuit or performance DTC is set along with P1681,
diagnose the circuit/performance DTC before continuing.
Turn the ignition on.
With the DRBIIIt, erase DTCs.
Start the engine on and off several times. Leave the engine running for at least 20
second each time.
With the DRBIIIt, read DTCs.
Does the DTC reset?
All
Yes ! Go To 2
No ! Refer to the INTERMITTENT CONDITION symptom in the
Driveability category.
Perform POWERTRAIN VERIFICATION TEST VER - 1 - NGC.
2 Ignition on, engine not running.
With the DRBIIIt, attempt to communicate with the BCM.
Can communication be established with the BCM?
All
Yes ! Go To 3
No ! Refer to the Communication Category and perform the appropriate
symptom related to no communication with BCM.
Perform POWERTRAIN VERIFICATION TEST VER - 1 - NGC.
3 Turn the ignition on.
Using the DRBIIIt, read the Fuel Level parameter in the PCM.
Does the DRBIIIt display a fuel level value?
All
Yes ! Replace and program the Powertrain Control Module in accordance
with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 1 - NGC.
No ! Go To 4
287
DRIVEABILITY - NGC
TEST ACTION APPLICABILITY
4 Turn the ignition off.
Disconnect the PCM harness connectors.
Disconnect the BCM harness connector.
CAUTION: DO NOT PROBE THE PCM HARNESS CONNECTORS. PROBING
THE PCM HARNESS CONNECTORS WILL DAMAGE THE PCM TERMINALS
RESULTING IN POOR TERMINAL TO PIN CONNECTION. INSTALL
MILLER SPECIAL TOOL #8815 TO PERFORM DIAGNOSIS.
Measure the resistance of the PCI Bus circuit from the BCM harness connector to the
appropriate terminal of special tool #8815.
Is the resistance below 5.0 ohms?
All
Yes ! Replace BCM in accordance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 1 - NGC.
No ! Repair the PCI Bus circuit between the PCM and the BCM for an
open.
Perform POWERTRAIN VERIFICATION TEST VER - 1 - NGC
__________________

Jan 13, 2013 | 2006 Dodge Caravan

2 Answers

Torque value for Spark Plug on a 2001 Cadillac Deville 4.6l Northstar engine


Proper torque for your car is: 15 ft. lbs. (20 Nm). Platinum tip spark plugs are recommended with a gap of .50. Thanks very much for using Fixya!
Greg

Aug 25, 2011 | 2001 Cadillac DeVille

1 Answer

P0155


Heated oxygen sensor (HO2S) 1 , bank 2, heater control -
circuit malfunction

sensor 1 is threaded into the exhaust manifold, passenger side of engine.

  1. Disconnect the oxygen sensor connector.
  2. Using an ohmmeter, measure the resistance between the terminals +B and HT. Resistance: 11 - 16 ohms at 20°C (68°F)
  3. If the resistance is not as specified, replace the sensor. Tighten to 14 ft. lbs. (20 Nm).
  4. Reconnect the oxygen sensor connector.

Oct 04, 2010 | 2002 Toyota Sequoia

1 Answer

Watter level light


There is a sensor that reads the water level. If the radiator is full I recomend testing the resistance on the water level sensor

Apr 30, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Where is the heater blower resistor located


Blower Motor Resistor
The four-speed operation of the blower motor is achieved through the blower motor resistor. The blower motor resistor is mounted under the A/C evaporator/blower motor assembly.
-----------------------------------------------------------------------------------------------------------------

the heater blower resister is in the heater plenum under the dash on the passenger side. the resister is in the air stream to keep it cooled. it has 2 screws holding it in and a 3 or 4 wire connector on it. easy repair. buy resister from tascaford.com for 25% off.


Dec 06, 2008 | 1999 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...