Question about 2001 Toyota Echo

1 Answer

Car factory radio removal

How do I remove the factory installed stereo on a 2001 Toyota Echo?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,

I came across this step by step explanation to remove it, along with photos. Good luck.

http://gordosoft.com/echo/Toyota%20Echo%20radio%20replacement%20guide.pdf

Mike

Posted on Feb 26, 2014

Testimonial: "This was exactly the information that I needed! Thank you!!"

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 438 Answers

SOURCE: How to....remove radio sepakers (rear) from a Toyota Echo??

It's really easy to remove the rear speakers. First, get in the trunk and find the 3 white anchors for the rear deck-they're near the rods for the trunk mechanism. Push them through the metal frame to free the deck. Next, you have to get in the back seat and remove the stop light from the deck. To do this, push in the pins on the locking mechanisms on either side of the light to free the back casing. Pull the pins out and the casing off. Next, undo the two bolts holding the stop light in place and pull it off-don't forget to undo the wiring harness. Next, find the three anchoring points for the back seat. Gently lift the two side ones free of their anchors. This gives you access underneath the deck. Free the deck and gently lift it over the seat. You'll have to jimmy it a little to get the locking clamps free--they're all along the back of the deck. Pull it free and you have access to the speakers. I believe the factory speakers are 5 1/4 inches
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.

cheers

Posted on Oct 14, 2009

  • 19 Answers

SOURCE: how to remove toyota echo car stereo system

remove stereo suround which is held in with some stubbin clips then its quiet easy from there

Posted on Oct 18, 2009

  • 16 Answers

SOURCE: I need to change out the factory radio in a 2002

go to this website see if it helps you http://www.installdr.com/InstallDocs/GM/PDF/460011.pdf

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the radio out of the car for repair?


Cadillac Allante Bose Stereo Removal and Repair - YouTube

? 4:44
https://www.youtube.com/watch?v=gnoCICSMdto
Mar 2, 2009 - Uploaded by Factory Car Stereo Repair
Cadillac Allante Bose Stereo Removal and Repair. Factory Car Stereo Repair ... Cadillac Allante Promo 1988? ... Restricted Mode: Off. History

88-94 Cadillac Radio - YouTube

? 1:44
https://www.youtube.com/watch?v=IQyA-i_G_Lw
Feb 25, 2012 - Uploaded by mrzhvac
Cadillac Fleetwood Car Stereo Removal 1993 - 1996 - Duration: 3:10. Factory Car Stereo Repair 3,801 views. 3:10. 1990 Cadillac Brougham ...

Car Stereo Removal - Cadillac Allante Car Stereo Removal ...




Jan 08, 2016 | 1988 Cadillac Fleetwood

1 Answer

How do you remove the stereo from a Toyota Echo?


NOTE: The following procedure may vary a bit from the system which you have in your car.
TO REMOVE RADIO RECEIVER ASSEMBLY
(a) for Integrated with Panel:
(1) Disconnect the hazard warning signal switch
connector.
(2) Remove the 4 bolts.
(3) Disengage the 4 clips and the 4 claws and
remove the radio receiver.
(4) Disconnect the plug.
(5) Disconnect the 3 radio connectors.
(b) except Integrated with Panel:
(1) Remove the 4 bolts and the radio receiver.
(2) Disconnect the plug.
(3) Disconnect the 2 radio connectors.
1. REMOVE INSTRUMENT PANEL CENTER REGISTER
ASSEMBLY (for Integrated with Panel)
2. REMOVE RADIO BRACKET RH
(a) for Integrated with Panel:
(1) Remove the 4 screws and the radio bracket.
(b) except Integrated with Panel:
(1) Remove the 4 screws and the radio bracket.
3. REMOVE RADIO BRACKET LH
HINT:
Use the same procedure as for the RH side.

Feb 14, 2014 | 2001 Toyota Echo

1 Answer

Car Stereo Speaker Wiring Colors for a 2001 toyota Solara


Radio Battery Constant 12v+ Wire: Blue/Yellow
Radio Accessory Switched 12v+ Wire: Gray
Radio Ground Wire: Brown
Radio Illumination Wire: Green
Stereo Antenna Trigger Wire: Black/Red
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White

Jun 17, 2013 | Toyota Cars & Trucks

2 Answers

Can you put a newer radio in a 2001 yukon


Hi, my research indicates you can install a single din aftermarket head unit in the 2001 Yukon.
A couple of good websites to use are crutchfield and modifiedlife.
Crutchfields will identify exactly what adapters are needed, and modified life has the factory wire colors.
You will need an adapter to fill the space between the aftermarket stereo and the hole left by removing the factory head unit.
You will also need an antenna plug adapter.
I recommend you buy the wire harness pigtail to simplify the installation--this may or may not include the antenna plug adapter.
If you have onstar, you will need an additional adapter.
If you have steering wheel controls, you will need another adapter to keep those.
Keep the above things in mind when selecting a new aftermarket stereo, as you will need one that is compatible with steering wheel controls and onstar, if you have either of those and want them to continue to work with the new stereo.
Crutchfield has an link called "outfit my car" that takes you through a "Turbo tax" style questionaire and tells you what will work and what you will need. here is the link: http://www.crutchfield.com/App/Car/outfitmycar/MyCar.aspx

Assuming you have a base Yukon, here are your factory wire colors from modifiedlife.com:
2001 GMC Yukon Car Radio Wiring Schematic
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Please let me know if you have questions, and thanks for using FixYa.

Jan 18, 2011 | 2001 GMC Yukon

1 Answer

Need wire diagram for 2001 toyota tacoma for installing JVC kw-nt3hdt stereo or any advice


Hi, here are your factory wire colors/functions. Aftermarket stereos have a common set of colors, which should be in your installation diagram. The process is simplified if you purchase a wiring adapter for your vehicle. These are available for under $10 at most WALMARTs and auto parts stores or about any place that sells car stereos. In either case, I recommend you solder the connections or at least use crimp terminals. If you have any more questions, please let me know--I've done a lot of stereo installations.

2001 Toyota Tacoma Car Stereo Installation Guide
Car Radio Battery Constant 12v+ Wire: Blue/Yellow
Car Radio Accessory Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White

Jan 07, 2011 | 2001 Toyota Tacoma

1 Answer

How do i take out my radio from my toyota corrola


The Toyota Corolla has been around long enough that many owners find themselves needing to replace the factory stereo. Installing a new stereo in the Toyota Corolla gives improved sound and updated features. Swapping out the stereo in the Toyota Corolla takes basic tools and less than an hour. This article covers models from 1990 to 2000.

Open the hood and remove the negative battery cable from the terminal. Apply the parking brake and place the car in "D."

    > Remove the trim from around the stereo by prying with your fingers at one corner. Some early models have two screws at the top of the trim piece to remove first. Allow the trim to hang on the drivers side of the dash if it's connected to the cigarette lighter.
    > Locate and remove the four screws holding the stereo in place. Pull the radio out of the dash and disconnect the wires from the back of the head unit.
    To install
    > Connect the wiring harness adaptor to the original harness and let it hang from the dash. Slide the new stereo into the Toyota radio mounting kit, which is a thin metal cover and secure it per the manufacturer's instructions. Most adaptors have screws to hold the stereo in place, however some have clips, which engage automatically.
    >Plug the wiring harness adaptor and antenna wire into the back of the new head unit and push the entire assembly into the dash. Reconnect the negative battery cable and turn the radio on.
    > Ensure all of the stereo controls and speakers are working. Secure the radio in the dash with the original four screws and replace the trim.

Dec 05, 2010 | 1990 Toyota Corolla

1 Answer

How to remove toyota echo car stereo system


remove stereo suround which is held in with some stubbin clips then its quiet easy from there

Oct 18, 2009 | 2003 Toyota ECHO

1 Answer

How do you install a alternator in a toyota echo?


-disconnect battery (-) terminal.
-remove plastic cover to the left of the radiator(when looking from the front)
-loosen off 12mm bolt from top of alternator
-loosen off 14mm bolt from bottom of alternator
-disconnect wiring harness at alternator and remove 10mm nut holding the main wire.
Push alternator towards engine to slacken belt tension, then remove belt
-finish removing 12mm and 14mm bolts and remove alternator from the car.
-Replace in reverse order.
When tightening belt tension becareful what you pry against. You can easily damage the oil control solenoid the controls the camshaft.

Apr 17, 2009 | 2001 Toyota Echo

Not finding what you are looking for?
2001 Toyota Echo Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...