Question about 2000 Chevrolet Silverado 1500

Open Question

I have a 2000 chevy silverado, the front left and brakes lock on a sharp turn back or foward

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Auto Master
  • 139 Answers

SOURCE: 00 Chevy Silverado... ABS EBCM diagram help??? Brake line hookups

I hope this helps.

Thank You,

Posted on Aug 28, 2009

  • 631 Answers

SOURCE: what tools do i need to change the rear brake pads

If you have disc brakes then all you need is a c-clamp to compress the brake caliper. If you have drum brakes then you really need to purchase a pair of brake pliers and pair of small vise grip pliers or tool to re-install your retainer springs. It isn't very expensive for either and not hard to change your own brakes. Just do one at a time and don't take everything off of both sides in case you have to look at the other side to see how things go back together. You will have to jack up one side at a time to take the tire off.

Posted on Nov 24, 2009

  • 347 Answers

SOURCE: Rear brake pad dragging


Posted on Jan 01, 2010

  • 80658 Answers

SOURCE: can't get brake fluid from abs into lines after

I read this same problem all the time, the reason u can't bleed the lines is that a special tool is required that pluge into the ABS and holds the hydraulic valves in the ABS control open for bleeding, there is no way around this.

Posted on May 19, 2010

  • 1 Answer

SOURCE: 1998 chevy silverado brake problem

my front brakes dont release all the way causing my rotors to heat up. I changed calipers, brake hoses, master cylinder, brakes and they still wont release

Posted on Sep 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Trying to figure out how to bleed abs block on 2000 chevy silverado 1500

I am in the UK, so do not know this model, but I am a Bosch service tech and can tell you, if you have air in the ABS unit itself, you well need to connect to diagnostic tool with bleeding/venting program on it. The ABS pump needs to run and operate the solenoids to get the air out...

Sep 13, 2013 | 2000 Chevrolet Silverado 1500

1 Answer

Pioneer How To Install a AVH P2300DVD in a 2000 Chevy Silverado

Constant 12V+Orange Switched 12V+Yellow GroundBlack IlluminationGray DimmerBrown AntennaRight Window Trim Front Speakers6 1/2" DoorsLeft Front (+)Tan Left Front (-)Gray Right Front (+)Light Green Right Front (-)Dark Green Rear Speakers4" x 6" Side PillarLeft Rear (+)Brown Left Rear (-)Yellow Right Rear (+)Dark Blue Right Rear (-)Light Blue

Jun 18, 2013 | 2000 Chevrolet Silverado 1500

1 Answer

I have a 2000 chevy silverado, the front left brakes keep getting stuck and i just change caliper for the second time so i know its not that.

It may be a bad rubber brake line that connects to that caliper, preventing brake fluid from exiting the caliper. Older rubber brake lines can collapse internally and prevent fluid passing through. If the rubber feels spongy, it needs replacing.

Jul 01, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

How to replace front brakes on 2000 chevy 2500hd 4x4

jack up support truck remove wheel remove two bolts on back of brake caliper lift off caliper use a c clamp and one of the old brake pads slowly compress brake piston flush replace brake pads and reassemble

Oct 19, 2009 | 2000 Chevrolet Silverado

3 Answers

1998 chevy silverado brake problem

Sound's like the ABS common problem. Chevy has a recall that say's to remove and clean the front speed sensors mateing surface of rust. I would try that before I started spending money. If you can do you own front brakes you can handle this. Good luck

Aug 03, 2009 | 1998 Chevrolet K1500

2 Answers

Stuck allen screws on 2000 silverado front brakes

Cut down a bolt so that the threaded bit sits inside the hole in the hex bolt place a washer between the head of the bolt and the top of the hex bolt.

Put a support behind the caliper so that any energy you use is not wasted

Use a bit of masking tape to hold it in position and give it a couple of sharp hard hits to the top of the threaded bolt

Try to crack it open

If not then you need to apply some to the area heat using a small blow torch, do not go wild as you can end up cooking the cylinder rubbers

Jun 19, 2009 | 2000 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides