Question about 2006 Mitsubishi Lancer

1 Answer

Indicators not working properly need to remove steering wheel without deploying air bags

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Mitsubishi Master
  • 803 Answers

Disconnect battery and remove SRS fuse, and if your in cold weather region, ground yourself to the body to avoid static spark discharge.

Posted on Feb 14, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 03 eclipse steering wheel

You will have to remove the stock steering wheel, equipped with an airbag.

Posted on Sep 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

None of the things on the steering wheel work. no horn cruise control, radio ect


Is the air bag light on? Most likely a clock spring failure. Located in behind the steering wheel. Have a pro look at it as this spring assembly needs to be installed/timed properly and can cause premature air bag deployment if not repaired properly

Apr 25, 2015 | 1998 Lincoln Navigator

1 Answer

How to remove the steering wheel for replacement


SIR DISABLE:
DRIVER SIDE
Many service procedures require the air bag system to be disabled to prevent accidental deployment. The air bag system can maintain sufficient voltage to cause deployment for up to 2 minutes after the ignition switch is turned off, the battery ground cable is disconnected or the DERM fuse is removed. If the inflator module is disconnected from the deployment loop by the following procedure, service can begin immediately without waiting for the 2 minute time period to elapse.
  1. Turn steering wheel so that vehicle wheels are pointed straight ahead.
  2. Turn ignition switch to Lock position and remove key.
  3. Remove air bag fuse from fuse block.
  4. Remove steering column filler panel.
  5. Remove Connector Position Assurance (CPA) and disconnect yellow two-way connector at base of steering column, Fig. 1.
PASSENGER SIDE
  1. Remove air bag fuse from fuse block.
SIR ENABLE:
Driver Side
  1. Turn ignition switch to LOCK and remove key.
  2. Connect yellow two-way connector and install connector position assurance (CPA).
  3. Install steering column filler panel.
  4. Insert air bag fuse into fuse block.
  5. Turn ignition switch to RUN and verify that the air bag warning lamp flashes seven times then turns off.
Passenger Side
  1. Turn ignition switch to LOCK and remove key.
  2. Insert air bag fuse into fuse block.
  3. Turn ignition switch to RUN and verify that the air bag warning lamp flashes seven times then turns off.

remove-steering-wheel-replacement-rfvykuizssn2qn2mhtsbw2yl-3-0.png

Apr 10, 2015 | 1996 Chevrolet K1500

1 Answer

Remove the steering wheel of a 2013 Toyota corolla


As a general thing on newer models, disconnect negative battery cable, pull the air bag fuse(s) to ensure the air bag doesn't deploy. Remove the air bag by taking out the attaching screws usually on the back side of the wheel. Disconnect the air bag wiring from bag assembly then from steering column, unbolt wiring assembly and remove. Unscrew center hub bolt, then use a wheel puller to remove wheel.

May 23, 2014 | Toyota Corolla Cars & Trucks

1 Answer

On a 3.2 TL Acura, the "SRS" Indicator Light stays on after the engine starts. What codes will be indicated when I try and read the codes?


THE SRS means Air bag sensor and trigger ..

Simply put the SRS light tells you that the sensor cant connect to the trigger of your airbag namely the one locate in the steering wheel. This is beacause of a device known as a clock spring located in the steering. Its moves like a clock and allows the sensor and bag to get connection but sometimes the coil wires get broken.

To fix this take it to a SHOP.
reasons for that.
1.) A DEPLOYED AIR BAG WILL KILL YOU
2.) WITHOUT THE PROPER KNOWLEDGE YOU WILL DEPLOY THE AIR BAG
3.) EQUIPMENT IS EXPENSIVE

the fix involves. (REMOVE BATTERY)
1.) remove the steering wheel using the lock bolt and key
2.) unblot and remove then unlock the clock spring
3.) replace,
4.) recalibrate and reset spring
5.) reset error codes
6.) reassemble
7.) reset error codes.

Mar 20, 2011 | Acura TL Cars & Trucks

2 Answers

Steering wheel adjustment , the steering whell is 90degrees off but the car does not pull eather direction. car was stolen no damage just steering whell truned


jack front of car up then turn steering wheel full lock to full lock and count the number of turns from either side then divide by 2 so you have the straight ahead position then remove the steering wheel and replace in the straight ahead position ,iam saying this because the vehicle may have been re tracked and only one track rod end adjusted so you have say 2 turns to the left and 2 and half to the right if you follow me .or remove the steering wheel then just hold it on and slowly drive forewards and lift wheel and refit to the correct position

Feb 10, 2011 | 1999 Mercury Grand Marquis

2 Answers

Service air bag indicator light on dash stays on


In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.

Sep 22, 2010 | 2005 GMC Sierra 2500HD 4WD

1 Answer

How do I replace steering wheel on 1995 chevy 1/2 ton pickup? will air bag deploy on me?


Well first disconnect the positive side of the battery. Then I recommend grounding the positive battery cable to the frame or negative side of the battery. (This will insure you have all possible stored voltage removed from your system). Your 95 model has two types of steering wheels and air bags. Model 1 there are four holes in the back of the steering wheel. You simply push a small punch or ice pick in the center to release the airbag from the steering wheel. If you have the later model 1995, there is a slot and you have to push a wire clip that holds the bag to the steering wheel. Once you get the air bag off the wheel, it just unplugs and you remove the steering wheel using a puller. All GM air bag circuits are yellow. They won't deploy without power. Good luck, I hope this helps.

Mar 13, 2010 | 1995 Chevrolet C1500

1 Answer

Needs key cylinder replacement


This first post is WITH AN AIR BAG:



With Air Bag Before removing the steering wheel, disable the air bag system
Disarming the System To disarm the air bag system, simply disconnect the negative battery cable from the battery. Isolate the battery cable by taping up any exposed metal areas of the cable. This will keep the cable from accidentally contacting the battery and causing deployment of the air bag. Allow the system capacitor to discharge for at least 2 minutes, although 10 minutes is recommended, to allow for the dissipation of any residual energy.

CAUTION Before removing the steering wheel, disable the air bag system (refer to Section 6). Failure to do so could result in accidental air bag deployment and possible injury.


  1. Disconnect the negative battery cable and disable the air bag system.
  2. Set the front tires in a straight-ahead position.
c0447ef.gif
Exploded view of the air bag module mounting

  1. Remove the air bag module retaining nuts from behind the steering wheel.
  2. Remove the air bag module.
  3. If equipped, remove the cruise control switch.
  4. Disconnect the horn wiring.
  5. Remove the steering wheel retaining nut.
  6. Scribe a line mark on the steering wheel and steering shaft if there is not one already.
1c64d39.gif
Use a puller to separate the wheel from the column

  1. Remove the steering wheel using a suitable puller.
To install:
  1. To install, align the scribe marks on the steering shaft with the steering wheel.
  2. Ensure the wheel compresses the 2 locktabs on the clockspring.

Oct 11, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Remove the steering wheel or airbag from a 2004 Volvo XC90?


You need a steering wheel puller. You may be able to rent this from your parts house. Disconnect the battery for no less than 1/2 hour before disconnecting the air bag or the air bag could deploy. Place air bag facing up or it could become a projectile if set off.

Aug 14, 2009 | 2004 Volvo XC90

1 Answer

Airbags


You may need to call several salavage yards, but there should be one out there that will sell you one without the air bag. If your steering wheel isn't damaged, you might be able to disconect the air bag from the steering wheel.

May 15, 2009 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
2006 Mitsubishi Lancer Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...