Question about 2000 Dodge Durango
We put new brakes on 2006 explorer put 4x4 on turned off then abs brake light came on also wrench light came on when 4x4 is on wrench light goes off
Brake lights are controlled by a switch on the brake pedal. Switch needs to be adjusted or replaced.
Hope this helps.
Posted on Mar 24, 2015
Check to see if the ABS system wire knocked loose when replacing the brakes.
Posted on Mar 07, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the ABS lite is comming on, the module is detecting a problem in that system. There will most likely be a code in the computer. take it to your dealer and have it check. The most common problem i see in these is a failed speed sensor.
Posted on Mar 15, 2009
Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.
Posted on Jun 02, 2009
check the sensors and connections may have loosened or knocked one loose if they look ok than have truck scanned most auto stores such as auto zone/advanced auto scan for free the trouble code will narrow the problem
Posted on Mar 24, 2010
It sounds like you have a bad mastercylinder cause when you panic brake it doesn't have time to bleed through the valve in the cylinder but under normal braking your foot is on pedal longer in turn giving the fluid time to bypass the valve in the mastercylinder in turn the pedal going to the floor.
Posted on Apr 21, 2010
Its either the speed sensor on the rear differential or your steering wheel is all the way down pinching a wire in the harness. I have had both problems. Raise the steering wheel and if that does not fix it then its the speed sensor(might be called something else) but it is on the rear diff.
Posted on Sep 26, 2010
Tips for a great answer:
Nov 06, 2015 | 2006 Ford Explorer XLT
Aug 10, 2014 | 2006 Ford Explorer Eddie Bauer 4x4
Apr 16, 2014 | 2004 Ford Explorer XLT
Jul 20, 2013 | Cars & Trucks
Feb 13, 2011 | 2004 Ford Explorer
May 08, 2010 | 2006 Ford Explorer
Feb 06, 2010 | 2004 Ford Explorer
Sep 13, 2009 | 2005 Ford Explorer
155 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: