Question about Saturn Vue

Open Question

Codes u2106 &u2107

The instrument cluster goes dead

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: instrument cluster dead

If your replacement cluster is a used cluster, it might have the same problem, which usually is bad solder points where the main connector connects onto the circuit board of the cluster. If you do some internet searches under Caravan instrument cluster solder you should get lots of sources for instructions and photos of the problem. Sometimes the bad solder points are NOT really visible to the eye, so it's best to put a drop of solder on every one of the points where the connector attaches to the board. That fixed mine. If your cluster is brand new, I don't know what to tell you.

Posted on Apr 06, 2009

  • 48 Answers

SOURCE: 2000 Chrysler Voyager Instrument Cluster is dead

have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps

Posted on Apr 16, 2009

  • 4 Answers

SOURCE: Intermittant instrument cluster

HIT THE DASH! The instrument clusters (gauges) have bad soldering joints. You can hit the dash above the cluster to jar it to connect. A hard hit. Many have this problem, and you are better off taking your instrument cluster out and soldering the connector pins on the back then purchasing a new one or taking from the junkyard. They are all the same, and fail with time if left unsoldered.

Posted on Apr 28, 2009

  • 1596 Answers

SOURCE: 1999 dodge caravan intermittent instrument cluster

This Seems Indicative Of a Poor Connection AT The CLUSTER Or A Junction Connecter Close to the Cluster. This is Assuming you Have Ruled OUT ALL ABS COMPONENTS, LOOK at These VERY CLOSLY Because of the Small Volts These Wires Carry , the SMALLEST DEFECT WILL Cause this Type of Symptom that you have given. Please try all of the Above, I feel Confedint that athis is where your Problem Is.

Posted on Jul 16, 2010

motor1258
  • 6674 Answers

SOURCE: ,have 1997 plymouth grand voyager,

Sounds like you may have the dash cluster solder problem. Here's a link to some pictures of what needs to be done, but if you google Caravan dash soldering, or similar, there is more details out there.

http://www.ingriddijkers.com/CaravanPics.html

Posted on Jan 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 silverado cluster went dead when battery went dead ,put new battery in and sill nothing ,can you help me


Do you own a professional type scan tool ? Would need to see if the instrument cluster can communicate with scan tool . That would be a priority . If the instrument cluster ,for some reason wouldn't be talking,checking power an ground for the cluster . Batteries going dead , changing batteries without a alternative power supply can cause modules to go to sleep permanently ! Battery Disconnect or Replacement Problems I'am not saying that's what happen to your's . 2003 to 2006 GM had cluster problems ! The solder use in the cluster caused silver migration , instrument cluster caused a drain on the battery overnight . Watch these videos !

Chevrolet Truck Battery Dies Overnight Part II

Chevrolet Truck Battery Dies Overnight Part

Apr 04, 2017 | Chevrolet Silverado Cars & Trucks

1 Answer

Instrument cluster illuminates intermittently on 1990 eldorado


If this is the analog intrument cluster and the entire instrument cluster is intermittently losing illumination, remove the instrument cluster light fuse and replace it with a new fuse. It is remotely possible that the actual fuse holder wires have broken due to age and would need to be soldered back together.
If this is the digital instrument cluster and the entire display is going dead, it could be anything from the wiring harness to the BCM. If it is the digital instrument cluster, I can really only recommend taking it to a reputable shop or Cadillac dealer to service.

Dec 21, 2016 | 1990 Cadillac Eldorado

1 Answer

What is code U2107


Hi the codes are present , I have cleared them , and they come back , the 1482 , code seems to be for the radiator fan , and the code 2107 for electrics to my instrument panel I believe , because as I am driving the rev counter and speedo and oil , all the needles go to zero , they start working intermintanyly with the orange spanner light flashing on

Jan 27, 2016 | 2006 Chevrolet Chevrolet Malibu MAXX LT

2 Answers

91 olds instrument cluster is dead


Check fuse panel blown cluster panel fuse, other than that make shure cluster is getting good ground. Replacement cluster would not be expensive from auto wreckers.

Jan 15, 2016 | Cars & Trucks

1 Answer

2005 Chevy classic. when starting, after started the instruments go dead for a second or two and come back. What could be causing this and is it a sign of a serious breakdown headed my way?


Could be problem with instrument cluster? Also, maybe an issues with voltage or ground for instrument cluster? I noticed one of the fuses for instrument cluster, is ignition feed, goes hot with the key on, ignition switch? Because the problem is intermittent, can be a pain to track. Because the problem is only for a second or two, not enough time to track? I did look for service bulletins for this issue, nothing caught my attention.

Feb 11, 2015 | 2005 Chevrolet Equinox

1 Answer

Instrument clustur n\goes dead


  • the whole cluster, ?
  • all warning lamps,?
  • all gauges dead.?
  • all parking lamps dead?. in with head light switch to 1st click park?
did you check the fuses yet? (use a meter, not just look)
does car drive. ?
are there other features in car dead?

here is the schematic.
wrangler TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

see WIRING
see chapter.8w-40-8
see fuse 1? parking lamps.
40-2
see fuse 10 and 17? blown.
the lamps are all controlled by the cluster brain
the PCM or BCM tells the cluster what to do via, a network
called the CCD bus.

the first step is to check fuses.
then scan the PCM see if there are DTC errors.
that is how it is done.

ask more , tell more, get more.





Apr 10, 2014 | 1998 Jeep Wrangler

1 Answer

Cluster goes out and comes back on or just stays out


I/P cluster,
well there 20 lights there, idiot lamps, parking lamps
gauges.?
now what goes out.?
ALL 100%? ALL DEAD, every thing, in the instrument cluster?
blown fuse. in one or other fuse box (x2)

Jan 13, 2014 | 2000 Jeep Grand Cherokee

1 Answer

Instrument Panel goes Dead for few minutes


I don't have a clue what the problem with your Instrument Panel is, but I can give you some advise. Email or Snail Mail your cars manufacturer and complain about your Dealer shotgunning the repair on your car and causing more damage.
It happened to a friend of mine and Corporate reimbursed him what he had paid the Dealer.
Good Luck.

Jan 11, 2014 | 2007 Ford Five Hundred

1 Answer

2002 ford ranger tail lights and instrument cluster lights out


There are a total of six fuses that control exterior lights and dash lights. Check all of these Fuses: 10, 21, 3, 7, 13, 33
Does the high mount stop light work when you apply the brakes?

Jul 19, 2017 | 2002 Ford Ranger Regular Cab

1 Answer

The instrument cluster on my 2000 Chrysler Cirrus doesn't work


A mechanic would test the power and ground circuits at the cluster plug, but it may be tough to fix if you can't make the problem happen on demand.

Jul 10, 2012 | 2000 Chrysler Cirrus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...