Question about Cars & Trucks

Open Question

Firing order diagram spark plug wires

Replacing spark plugs distributor cap etc on 1993 suburban Cheyenne 8 cylinder

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires

Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Posted on Jul 05, 2008

Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine

Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Posted on Jul 06, 2008

fastboyz
  • 674 Answers

SOURCE: distributor cap firing order on a 1993 chevy cheyenne truck v6

b9fdd9f.gifhere

Posted on Nov 28, 2008

  • 2 Answers

SOURCE: distributor cap firing order 1993 chevy cheyenne truck v6

Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.

Posted on Nov 30, 2008

  • 79 Answers

SOURCE: Need spark plug wire to distributor diagram for 2000 dodge ram

Hi
Here is a diagram.93009452.gif

Posted on Apr 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No fire to the spark plugs


For spark plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs?http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

Feb 23, 2012 | 1993 Honda Accord

3 Answers

Some put plug wires on wrong and i dont know how to fix this


Firing order 1-3-7-2-6-5-4-8 --------- front ' 1 2 3 4 ' of ' 'distributorless ignition vehicle ' 5 6 7 8 2.image

Jun 10, 2011 | 1995 Mercury Grand Marquis

1 Answer

2001 dodge ram 1500 5.2 v8 van spark plug diagram


firing order is 1 8 4 3 6 5 7 2 standing in front of truck. cylinders on passenger side facing you are 2 4 6 8 cylinders on driver side facing you are 1 3 5 7 now this is your spark plugs wires location on distributor cap.with distributor facing you.2 plugs wire on cap 6 oclock position 1 plug wire on cap 8 oclock position,8 plug wire on cap 9 oclock position,4plug wire cap 10 oclock position,3 plug wire on cap 12 oclock position,6 plug wire on cap 1 oclock position, 5 plug wire on cap 3 oclock position, and 7 plug wire on cap 5 oclock position. in order for this to work you must be standing facing the engine all plug wire location on cap should be correct.

Apr 08, 2011 | Dodge Ram 1500 Cars & Trucks

2 Answers

1993 lexus 300 sc firing order and distributor cap diagram


Hello! If the engine in your vehicle is the 3VZ-FE...The firing order is 1-2-3-4-5-6...Distributor rotation is Counter Clockwise...

saailer_14.gif

If the engine is a 2JZ-GE...The firing order is 1-5-3-6-2-4...Distributor rotation is Counter clockwise

saailer_15.gif
Guru...........saailer

Nov 20, 2010 | 1992 Lexus Sc 300

1 Answer

Just wondering if you have a breakdown diagram for a 1992 dodge colt 1.5l distributer


I do not have a breakdown diagram for a distributor, but just the firing orders and description of ignition system for the Dodge Colt and related models (based on Chilton manuals) if that's what you're looking for: FIRING ORDERS Fig. 1: 1990 1.8L SOHC Engines Firing order: 1-3-4-2 Rotation: clockwise 84182009.gif

Fig. 2: 1.6L DOHC Engine Firing order: 1-3-4-2 Distributorless Ignition 84182010.gif

Fig. 3: 2.0L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182011.gif

Fig. 4: 1.5L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182012.gif

Fig. 5: 1993 1.8L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182013.gif

Fig. 6: 2.4L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182014.gif

To avoid confusion, replace spark plug wires one at a time. --- Distributor REMOVAL & INSTALLATION Although the distributor can be removed from the engine no matter which cylinder is about to fire, it is a good idea to have number one cylinder at TDC before distributor removal. 1.5L, 1.8L, 2.4L SOHC Engines
  1. Disconnect the negative battery cable.
  2. Disconnect and tag the spark plug wires from the distributor cap.
  3. Disconnect the distributor harness connector.
    Fig. 1: Ignition system for the 2.0L engine 84183001.gif

    Fig. 2: Ignition system for the 1.5L engine 84183002.gif

    Fig. 3: Ignition system for the 1992-93 1.8L engine 84183003.gif

    Fig. 4: Ignition system for the 2.4L engine 84183004.gif

  4. Loosen the distributor retaining bolt and remove the distributor from the engine. To install:
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke. NOTE: Be careful not to turn it to the No. 4 cylinder TDC on its compression stroke by mistake.
  6. Align the distributor housing and gear mating marks.
    Fig. 5: Ignition system for the 1990 1.8L engine 84183005.gif

    Fig. 6: Distributor installation for the 1990 1.8L engine 84183006.gif

    Fig. 7: Distributor installation for the 1992-93 1.8L engine 84183007.gif

  7. Install the distributor into the engine, while aligning the fine cut (groove or projection) on the distributor flange with the center of the distributor mounting stud.
  8. Install and tighten the distributor retaining bolt.
  9. Reconnect the distributor harness connector.
    Fig. 8: Distributor installation for the 2.4L engine 84183008.gif

    Fig. 9: Distributor installation for the 1.5L engine 84183009.gif

    Fig. 10: Distributor installation for the 2.0L engine 84183010.gif

  10. Install the distributor cap and spark plug wires.
  11. Reconnect the negative battery cable.
prev.gif next.gif prev.gif next.gif

Oct 11, 2010 | 1992 Dodge Colt

1 Answer

I need a diagram for spark plugs to distibuter cap for a 89 gmc suberban


For the 1989 GMC Suburban I do not know if you have the 5.7L or 7.4L, however both have the same firing order, cylinder layout and distributor layout:

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
.......(back)........
|..8..............7..|
|..6..............5..|
|..4..............3..|
|..2..............1..|
........(front)

Distributor Connections:
.....(back)
(+) 6.....5
3...............7
4...............2
.....8.....1 (+)
.....(front)
Rotation:
Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 27, 2010 | 1989 GMC Suburban

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

I need the correct spark plug wiring diagram for a chevy 350 5.7 kiter v8. the wires are already off.


Firing order is 1-8-4-3-6-5-7-2 and the rotor turns for clockwise. If you look at the distributor cap the Above

Jan 09, 2010 | 1993 Chevrolet Suburban

1 Answer

Replacing spark plug wires


It's gotta be 5.7 V-8 . As u stand in front of the suburban facing the front bumper, there are 4 spark plugs on each side of the engine. The front (of the engine) plug on the drivers side, is plug #1, the front plug on the pass. side is #2, then back to driver side, next plug back is #3, back to Pass side, next plug is #4 etc. to #8. The distributor cap (spark plug wires go from dist. cap (9 wires on top) to each spark plug, Extra wire goes to coil, which sends spark to all wires). The wires fire in the following order: 1, 8, 4, 3, 6, 5. 7, 2. You will have to find where the #1 spark plug goes in the distributor cap, some (hopefully yours ) have a #1 on the top next too where the wire plugs in to the cap. If u find this u r good to go! Put #1 wire in, using a pushing/twisting motion, the wires go in in a clockwise order from #1 as u look down on the distributor. Wires to spark plugs go on w/ same push/twist. You should hear/feel a slight click or snap (not always though!) if inserted all the way. Let me know if this is enough info, if not I'll try to give u more. If u can't find where #1 goes on the dist. cap, stand on the driver side of engine, I believe #1 is at approx. 8 oclock position on the dist cap. Good luck!

Oct 19, 2008 | 1995 Chevrolet Suburban

1 Answer

Ignition Wiring


Hi,

To my knowledge, firing order is 1-8-4-3-6-5-7-2 clockwise on the distributor cap with the Number 1 post pointed towards the Number 1 cylinder. The cylinders are numbered 1-3-5-7 (front towards the back) driver side while the passenger side/bank are numbered 2-4-6-8 (likewise front to back).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 04, 2008 | 1993 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...