Question about 1997 Honda Civic

Open Question

97 honda civic p0138, p0136 r&r both o2 sensors

Codes reappeared

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 167 Answers

SOURCE: which o2 sensor do i change with a p0141 code

O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)

Posted on Jun 27, 2009

lemmingleejn
  • 173 Answers

SOURCE: oil filter in civic 97

If you go to a reputable motor factor,
you can only be sold the correct filter for the civic.
As there are soo many variables in engine type, it's almost impossible to tell, oil volume, or which type filter.
However, I will say, be sure that you don't mix semi-synthetic oil, and mineral oil.
Oil changes should be undertaken every 30,000 miles, (unless under extra work load, (in which case, slightly more regularly))

Otherwise, 10/40 or 15/40 grade oil, is perfectly fine.
The trick to not overfilling the oil, is simply just to take your time, clean the dip stick and retry, until you have the correct reading.

Please don't forget to rate:)

Posted on Jul 29, 2009

philschneide
  • 448 Answers

SOURCE: i need the diagram for an o2 sensor honda civic ex

This pic MIGHT be helpful (it's from a 98):

81c55fc.jpg
Hope that it helps. If not leave a comment and I will try to find something else.

Posted on Jan 17, 2010

zaldyboy01
  • 293 Answers

SOURCE: Check engine light

Reset the computer.

Posted on Mar 06, 2010

toneman2121
  • 775 Answers

SOURCE: received code P0138 O2 High Voltage (Bank 1,

bank one will be the cylinders closest to the firewall. sensor two will be located after the catylitic converter,

Posted on Jun 09, 2010

Testimonial: "Thank you!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the probable causes of DTC P0136?


There are two sensors on that car, they are installed with a modification to the wiring unless you use OEM, Check your connections but it is most likely a bad upstream sensor. They both should be changed at the same time. They wear out and have a finite life.

Mar 07, 2016 | 2012 Toyota RAV4

1 Answer

P0136 & p0138


I would replace the engine thermostat and clear the codes and drive it for a few days. P0136 is engine does not reach operating temperature

Mar 20, 2014 | Cars & Trucks

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

1 Answer

Po136 honda accord coupe 98 fix


P0136 Definition is 02 heater circuit bank 1 sensor 2,This sensor is a catalytic monitor sensor,if you replace this sensor and it reappears a catalytic replacement maybe required for your solution
by the way P0136 Honda doest use this code definition,

Aug 12, 2012 | 1998 Honda Accord

1 Answer

I recently bought a 2000 Honda Odyssey and the engine check light is on. I took it to AutoZone and the codes came back as P0136 and P0138. It's indicating the downstream O2 sensor. Today I jacked up...


Your car uses heated oxygen sensors. Once the key is turned on the heating element in the sensor will start heating up. If you leave the key OFF overnight and the sensor is warmer than the surrounding metal, then that would indicate a problem. Running the engine even for a just a minute will heat the exhaust system and the sensor quickly.

Oxygen sensors can maintain their "new" look for a long time. I have romved sensors that are years old and look new on the oustide but have failed. Looking new or old is not a good indication of failure.

Aug 05, 2011 | 2006 Honda Odyssey

1 Answer

I have a check engine alarm on my '96 honda civic ex and diagnostics result in code p0138. What does this mean?


The Heated Oxygen Sensor (2) located rear of catalytic converter produces an output signal relative to oxygen storage capacity of catalytic converter. Ho2S 2 signal is less active than signal produced by front oxygen sensor. This code sets when HO2 Sensor voltage is greater than 999 mV for more than 2 minutes (time depends on model. Could be as high as 4 minutes)
There may be no noticeable symptoms except for MIL illumination. Possible high fuel pressure can over rich the system.
A code P0138 may mean that one or more of the following has happened:
  • Faulty O2 sensor
  • Short to battery voltage in O2 sensor signal circuit
  • High fuel pressure (not as likely)
Here are some potential solutions:
  • Replace O2 sensor
  • Repair short to battery voltage in o2 sensor signal circuit

Feb 10, 2011 | 1996 Honda Civic

1 Answer

My 1999 honda odyssey have a light on in the check engine, i went to the mechanic & plug it to the small computer, the computer said no response to code P0138B BANK 1 SENSOR 2 HIGHT VOLT, the mechanic...


There is are upstream and downstream O2 sensors. 1 or 2 (upstream) before the catalytic converter which sends signals for closed loop fuel control and OBD II monitoring, and 1 (downstream) after the catalytic converter, which is used to monitor the catalytic converter operation. The PCM monitors the signal from each O2 sensor.

Nov 02, 2010 | 2006 Honda Odyssey

2 Answers

Honda crv 2000 Real time awd have a white smoke on


When the engine is cold place a piece of paper in front of exhaust pipe and see if that white smoke contains oil in it.
If it is oil it means a cracked block or worn rings in engine which means very expensive repair or replacement of engine.

If steam is coming out exhaust then water is escaping from the head gasket into the fuel chamber of the piston and is being ignited and turned into steam. A blown head gasket or worse a warped engine head may be the cause. A engine compression test would rule this out as a cause .

Mar 30, 2017 | Cars & Trucks

3 Answers

I failed the emisson's test. I have a 97 Nissan


P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer)
P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.

Nov 03, 2009 | 1997 Nissan Maxima

1 Answer

My car is xg300 Hyundai the code showing up are p01191 &p1193 , p0136, p0141 what are they will it cost me


Electronic Throttle System codes (P1191 & 1193), Limp Home mode & Low RPM (Detected RPM below 470). This is usually cause by either a sticking throttle plate or an intake air hose leak.

P0136 - O2 Sensor Malfunction (Bank 1, sensor 2), P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2). Either the sensor is broken, it's been unplugged, or the wiring has been damaged.

Oct 13, 2009 | 2001 Hyundai XG300

Not finding what you are looking for?
1997 Honda Civic Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...