Question about 2001 Ford Ranger Regular Cab

Open Question

Starting Problem starts at high rev then shuts down

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When starting off driving and changing from first to second gear if I take the revs high, the revs stay high and don't come down quick enough making the gear change very jerky.


Try idle air controller , possibly m.a.p censor. , best to go to auto zone or similar have codes read and go from there .

Nov 14, 2015 | Cars & Trucks

1 Answer

I have 2004 Toyota Corolla with a remote start when starting the car idle is very high then shuts down


most likely idle air control valve on throttle body remove rubber air duct that runs from air filter spray real good with carb spray wait 30 minutes for it to dry should improve condition

Feb 26, 2015 | 2004 Toyota Corolla

1 Answer

1997 acura cl 2.2 revs up to 1500 rpm and down to 1000 rpm just several seconds after start


Cars are design to run at a higher idle at start up to warm them up quick. There is a sensor that reads water temperature and tells your car's computer how fast to idle. Your RPMs seem slightly high but not out of the norm. Does idle ever drop to around 600/800 after about a minute? If not, your engine temperature sensor maybe defective.

Mar 16, 2014 | Acura Cars & Trucks

1 Answer

My 96 ford taurus revs high when starting then works it way from 1500 or more down to 800 but fluctuates from 800 to a little over 1000. When putting car in rverse or drive from park engine revs up to...


You need to clean the IAC again and also the throttle valve and bore, use only CRC brand Throttle body cleaner. After they are thoroughly cleaned disconnect the battery for 5 min's and then drive the car in varying condition for a few days. If that doesn't cure the issue you have more serious problems and will need a scan tool to look into the readings from the MAF, TPS and ECT sensors. High idle cold start is normal then slowly dropping after a few minutes. I assume you never had a check engine light. Correct?

Mar 24, 2017 | 1996 Ford Taurus

1 Answer

Whats the cause of high revs after cleanin the engine when starting it


you obviously have gotten water in somewhere not meant to get wet. if it hasn't fried anything it should settle down as it dries out.

Jul 14, 2012 | Cars & Trucks

1 Answer

2002 dodge neon car idles real high upon starting


theres a air leak! check out your throttle body

Jan 03, 2010 | 2002 Dodge Neon

1 Answer

I only just brought it v6 1991 wont rev out clean dies down at high revs


it has a rev limitor on it.. at high revs the computer shuts the engine down to prevent damage.

Dec 11, 2009 | Toyota 4Runner Cars & Trucks

1 Answer

Shifting problems/trouble starting cold


theres many things that can be the cause,instead of having people tell you to try this and that,change this and that,scan codes it will point you at problem area and start from there

Mar 02, 2009 | 1991 Pontiac Sunbird

1 Answer

High RPM when starting


Possible vacuum leak on one of the hoses, use a can of carb cleaner and spray the hoses and around the intake to locate a possible leak, the engine will rev up if you hit one.

Aug 23, 2008 | 1996 Volvo 850

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...