Question about 1996 Isuzu Hombre
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.
Posted on Aug 15, 2008
The specs.Are the m8 bolts 15 ft.lbs and the m11 bolts 47 ft.lbs.note:The m11 bolts cannot be reused and no oil on threads.
Posted on Dec 02, 2009
Tips for a great answer:
Oct 07, 2016 | 2003 Oldsmobile Silhouette
Apr 13, 2016 | 1998 Isuzu Hombre
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon
Jul 07, 2014 | 2005 Isuzu Hombre
Fig.: Cylinder head bolt torque sequence-2.2L engine
Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.
Hope this helps (remember to rate this answer).
Jan 25, 2011 | 1996 Isuzu Hombre
Dec 05, 2009 | 1988 Ford F 150
Dec 28, 2008 | 1998 Chevrolet Astro
Dec 26, 2008 | 1997 Chevrolet Malibu
May 19, 2014 | 1996 Isuzu Hombre
59 people viewed this question
Usually answered in minutes!