Question about 2001 Dodge Durango

1 Answer

My 2001 durango has no turn signals on dash, nor do they work in back and hazard lights don't work.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 133 Answers

The flasher relay probably has to be replaced.

Posted on Feb 13, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 512 Answers

SOURCE: 1999 dodge durango turn signal problems

check fuse 16 in the fuse panel inside the vehicle...if that fuse has power then likely it is the multifunction switch thats bad or the combination flasher

Posted on Nov 16, 2008

emissionwiz
  • 76673 Answers

SOURCE: 2001 dodge durango turn signals

HAVE U REPLACED THE TURN SIGNAL FLASHER? IF NOT DO SO, THIS SOLUTION ASSUMES THE TURN SIGNAL LIGHTS ON THE FRONT AND BACK ARE LIGHTING UP BUT NOT BLINKING.

Posted on Feb 09, 2009

  • 1151 Answers

SOURCE: turn signals and hazard lights quit working on 2001 dodge ram

The only thing left to investigate is the signal switch itself. The brake light system runs through the signal switch so it can effect both systems. Start with the simple, like, is a wire loose? Look at the base of the steering column. Check plugs and such. I believe you'll see it's in that part of the system.

Good Luck

Posted on Feb 27, 2009

  • 335 Answers

SOURCE: All lights work on the rear except the three brake lights

Sounds like the brake light switch has a problem. Located above brake pedal and activated with the brake pedal arm. Check for power going in and coming out when you apply the brake.

Posted on May 24, 2009

  • 412 Answers

SOURCE: Have hazard lights but no running or turn signals

sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace turn signal and hazard light flasher on a 2002 durango


This is the same procedure as a Dokota, you are in luck, there was nothing on the Durange but there isa good video for the Dakota. Replace Turn Signal for Dodge Dakota 2001

Jan 26, 2017 | 2002 Dodge Durango

1 Answer

I have an 2001 Dodge Durango and the turn signal and hazards light are not even blinking on the dash board or outside. The heat blows out but only on high it was working on low and med but now its only on...


The turn signals issue is most likely a fuse or the flasher. The blower issue is a bad blower motor resistor. As far as your running problem if you mean no start no lights, ect check your battery and alternator.

Feb 08, 2014 | 2001 Dodge Durango

1 Answer

Fuse keeps blowing out


The parking lights, dash lights, turn signals, and hazard flasher should be 4 different circuits.
So you would need to know exactly what that fuse protects, then look for the short to ground.

Feb 27, 2013 | 1999 Dodge Durango

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

2 Answers

My blinkers have stopped working and my break lights dont work except for the light over the top of the back end. it works when i press the brake. my regular lights work and my high beams work also.


Fix. Turn signals and hazard are on one switch on the dash. Problem is cold solder joints on small board on the switch. First fix I re soldered loose connection on board, worked for a while. Finally simply changed switch with a new one. Take off dash. About 5 screws, pop out hazard switch replace. Problem solved.

Oct 02, 2010 | 2001 Chevrolet Blazer

1 Answer

Where is the flasher for 2001 hyundai both turn signals and hazard not working


under the dash on driver side in front of the fuse box. But before hand pull out the middle of the dash where the hasard button is and check the plug. All of the signals that flash are circuited together an if the hazard button is unplugged the turn signals and rear lights will not work.

Sep 01, 2010 | 2001 Hyundai Sonata

6 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2001 Dodge Durango Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...