Question about Dodge Cars & Trucks

Open Question

Odometer doesn't light up with numbers 1998 dodge 2500

1998 2500 dodge

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: Dodge 2500 no speedometer, odometer lights up with

you will have to change out the speed sensor on the rearend it also controls the speedometer and odometer

Posted on Aug 23, 2009

  • 986 Answers

SOURCE: 1998 Dodge 2500 pickup turn signals, hazards

There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Posted on Oct 08, 2009

  • 1244 Answers

SOURCE: 1998 2500 dodge ram gauges jumpping after wife

oop's!!! i hate to tell you this!! but your ECM took a Hit!! you need to find you a new ECM before it gets any worse

Posted on Jan 15, 2010

  • 170 Answers

SOURCE: 2007 Dodge Ram 2500,Engine light is on and the abs

There are two sensors that can cause this. One is located on top of the rear axle pumpkin, and the other is either on or inside the trans.

I would check the rear axle one first as it should be the cheaper and easier of the two.

Posted on Apr 25, 2010

  • 46 Answers

SOURCE: 1998 dodge dakota 2wd v6, speedometer and odometer...

it could be the cluster but you have a im put and out put sensor on the transmission that controls the speedo

Posted on May 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Installed new engine module on 2002 dodge ram 2500, truck starts , it idles, it does not accelerate. what is the problem please ?

The computers on these trucks are not very junkyard swap able. You may have to order one online that is programmed for your truck. They will ask for the part number that is supposed to be in there, the VIN of the vehicle and the current odometer reading. Expect it to be in the $200~$300 range. Just Internet search dodge PCM, or JTEC. That's what Chrysler calls their vehicle computers.

Feb 10, 2013 | 1997 Dodge Ram 2500 Club Cab

1 Answer

Check engine light comes on flashes 3 times

first you have to diagnose the cause of trouble.
How to get the codes on a 1998-1999 Dakota: Depress the trip reset and trip/odometer switches, and, while holding them, turn the ignition to ON/RUN, and wait about 5 seconds. This sends the car through a short self-test sequence that lights all segments of the odometer and shift selector read-out (where applicable). It will then display the stored error codes.
If that doesn't work, try holding in the trip/odometer button while doing the key on/off cycle 3 time. If that doesn't work, some people have reported success by doing the key on/off cycle 10 times instead of 3.
you are unable to pull the trouble codes yourself, wether it be because you aren't doing the procedure right or perhaps your truck doesn't have that feature, most auto parts stores have scanners and will pull your trouble codes for free. I know for sure that Autozone does this, and have heard that many others do as well. (They do this for free because they are hoping that if it turns out to be a bad oxygen sensor, for example, that you will purchase an oxygen sensor from them.) You can also purchase a scanner of your own;

Dec 08, 2011 | 1998 Dodge Dakota

1 Answer

How do you check the engine code on an 2007 dodge ram megacab 2500

1.Get in the truck and close the door.
2.Turn the iginition key on and off quickly 3 times without starting it

3.Watch as the odometer numbers disappear and the error codes will show up.

4.When its done it'll say "done" and your mileage will return.

May 26, 2011 | 2007 Dodge Ram 2500 Mega Cab Laramie

1 Answer

1998 dodge dakota 2wd v6, speedometer and odometer...

it could be the cluster but you have a im put and out put sensor on the transmission that controls the speedo

May 18, 2010 | Cars & Trucks

2 Answers

1998 2500 dodge ram gauges jumpping after wife hooked up jumpper cables backwards i have replaiced a 140 amp fuse and the altanator and battery truck will run also the air bag light and odometer flash

You robably have a lot of stuff that is smoked. For your own safety and piece of mind, you should have this vehicle looked at by a professional. You do want these air bags to work if necessary, right?

I'm sorry ou have this problem. Please have a pro take a look see.

Thanks for your question at

Jan 15, 2010 | 1996 Dodge Ram 2500 Club Cab

1 Answer

Ram 2500 (2004) won't shift out of first when

Your transmission is dying. Whats happening is the clutch material has worn off the plates and is clogging up the valve body in the transmission, soon the trans will loose the forward gears and die completely. Sorry for the bad news.

Sep 17, 2009 | Dodge Ram 2500 Cars & Trucks

3 Answers

Wiring diagram for 1998 dodge ram 2500 pickup,

I have the wiring diagrams you need. Send me your email address and I will send them to you.

Aug 25, 2009 | 1998 Dodge Ram 2500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides