Question about 2004 Nissan Frontier

Open Question

Remove radio antena from a 2000 ford ranger - 2004 Nissan Frontier

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i reset antitheft system on 2000 ford ranger


you have to enter a four digit code into radio dealer should have it on file

Dec 19, 2014 | 2000 Ford Ranger SuperCab

1 Answer

Where is radio antenae connected?


To the antenna itself. If you remove the antenna and pull it out you will see where it is connected.

Jan 20, 2013 | 1999 Ford Windstar

1 Answer

Power on but my 2000 ford ranger will not start


Replace battery terminals and/or clean battery posts. Horn and radio don't use as much juice as starting. Sounds like a lack of amperage or electrical pressure to push the starter motor. Also check battery. Needs 12 or more volts and about 600 or more cranking amps.

Aug 11, 2012 | Ford Flex Cars & Trucks

1 Answer

After getting a jump-start, my entire radio/cd player went out in my 2000 ford ranger. It's a stock Ford unit. Won't come back on. Is it a fuse?


it sounds like it could be a fuse. double check in your owners manual where the fuse is located and double check if there is more than one fuse for the radio or it may have a fuse for the amplifier too.

Nov 19, 2010 | 2000 Ford Ranger SuperCab

1 Answer

The fuse for the radio on my Ford Ranger 2000. There is no diagram available. Where can I find which fuse is the one for the radio? Call 210-289-1997


Tom, the radio is fuse #20 in the fuse block, it's a 7.5 amp fuse. If you need more info, post it to me here.

Apr 20, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Power antena after markit how to make it work with radio


on the radio there is a cable that is for Power Antena you might have to set a cable out to the area you are instslling the antena if this car already had a power antena you only need to hook up the leds from the old if not then like i said you need to get positive cable out to the antena and ground it to chassis

Apr 01, 2010 | 2000 Mercury Sable

1 Answer

What cause radio harness and light switch harness to burn on a 2000 ford ranger


Hello
Check the ford recall list.Youll need your vin number of the truck.

There has been recalls for the brake fluid leaking and causing fires on the wiring harness.

OR contact your local ford dealer.

Mar 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Hi I have a 2000 Ford Ranger and the air bag light is flashing


The light (on the key switch) that indicates whether the passenger airbag is on or off is, more than likely, burned out. You can either replace the whole switch ($$$) or you can take it apart and solder a new led into the circuit board. You can get the bulb at radio shack (make sure it is 12v). Good Luck!

Nov 17, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
2004 Nissan Frontier Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...