Question about 1997 Toyota Land Cruiser

Open Question

Install gator g30c reversing camera

Instructions

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camera installation instructions indicate the a green/white wire is for hookup to the vehicle reverse circuit but the harness just has a green and a green/black. No green/white. What do I do?


The colours on the harness don't matter as long as you are connecting the camera to the circuit that powers the reversing lights. That way when you put your vehicle into reverse, the camera will get power.

Apr 23, 2016 | Cars & Trucks

1 Answer

How to fit a g427 gator reversing camera to a vy commodore. Confused to what wire to connect for the power to the monitor,and where that wire would be located.thanks Dale


The main active / positive you can pick up direct from a connection under the dash or from the fuse box. Its easy if you have a 12volt test light, you can locate a permanent or switched 12 volt when the ignition key is on. The viewer is usually always on when the ignition is on. The camera picks up power direct from the reversing light. Use a crimp connector or solder direct to the terminal which supplies power to the reverse lights. That way the only time the camera will operate is when the reverse lights are on. The tail and reversing lights usually have a common neutral or negative wire which is connected to the body of the car. The other wire is the one you want. That's the active wire that supplies power when reverse is selected.

Jan 02, 2015 | Cars & Trucks

1 Answer

How do i wire up camera at rear what wire is


a rear camera if fitted as a addition should come with all the instructions , i would assume the WIRE you refer to is for the reverse light so that the camera is operational when reversing , you need to give more information then you will get a better response

Sep 27, 2014 | Cars & Trucks

1 Answer

Instructions to install gator reversing camera


call gator and ask.
or RTM with cam.
lost them? call them.

Feb 13, 2014 | 1997 Toyota Land Cruiser

1 Answer

I want to install a back up camera on a 2013 altima and need to now what wire is the reverse light wire


There should be a good diagram in the wiring schematics that came with the camera. Follow the installation directions

Jan 18, 2014 | 2013 Nissan Altima

1 Answer

2004 Jeep Grand Cherokee reverse lights not working


Yes, fuse 20 on the junction block under the steering wheel.

Jul 28, 2013 | 2004 Jeep Grand Cherokee

1 Answer

Power outlets on console and in lighter area don't work,fuses under dash are OK>


You need a 12 volt test light,connect gator clip to known good ground,probe center bottom stud in lighter,if light is on you have power to system and the most common cause is a bad ground to the system,to check for a good ground ,reverse gator clip to known battery voltage and touch Sharp lead to lighter housing if lights up you have a good ground.

Aug 26, 2011 | Honda Accord Cars & Trucks

Not finding what you are looking for?
1997 Toyota Land Cruiser Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...