Question about Mazda Cars & Trucks

Open Question

Rear camber CX 5

Adjustment method

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: Camber adjustment

Camber adjustment is part of the alignment. who told you that?

Posted on Jun 28, 2009

fyrebyrd1
  • 121 Answers

SOURCE: 92 honda accord camber adjustment

There is no no camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts replacement is the only true fix. If the vehicle has had the ride height altered, ie. lowering springs, then there are adjustable upper control arms and ball joints available. These do generally only address the camber angle, not caster, which can also greatly affect handling. hope this helps.

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: have new mono rear shock and strut assembly for

Don't know if you got your answer properly or not, but you need NO rear camber Alignment on that vehicle. In fact it takes no alignment at all in the rear and the only thing adjustable in the front is TOE. So, YOU'RE GOOD!!!

Posted on Aug 20, 2009

  • 56 Answers

SOURCE: Having problems with Rear Wheel Alignment. Seems

needs ofset camber bushings installed

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the rear suspension adjustment figures for wh statesman


From the Holden Service CD:

The toe-in specification is deliberately quoted as an angle because wherever possible toe-in should be measured in degrees. Refer below for the recommended wheel alignment settings. These settings are at curb weight, which is the vehicle
in a condition of full fluids, full fuel, no people or luggage.


Front Toe-in Degrees Total 0°10' ± 0°10'
Degrees Per Wheel 0°05' ± 0°5'
Camber - 0°30' ± 0°20'
Caster 7°45' ± 1°15'

Rear Toe : 0 ± 1mm (0°± 0?10mins)
Camber : -1°30mins to -2°30mins
Torque Settings : 65 ± 5Nm

Jun 29, 2016 | Cars & Trucks

1 Answer

Loosen the idol pulley on a 1993 Buick century wagon


there are 2 methods for idler pulleys
all require to loosen the big nut holding the pulley on
some have a bolt at the back of the bracket behind the puller that you rotate either way to adjust off or on
others have a cog that runs on a rack that you turn up or down for the adjustment
remember to re-tension the big nut when finished as the method of adjustment is for adjustment only and is not sufficient to hold the pulley in position

Apr 14, 2015 | Buick Century Cars & Trucks

1 Answer

Purchased new but not original vauxhall headlights and when switched on they point down, not out in front like they did on originals. Levelling motors are fitted.


put the lights on and check the adjustment of the levelling motors check the method of fixing the motors to the headlights as it may be a hole out or a screw adjustment on a rod.. Remember low beam is meant to point down with only the main beam lights to point straight ahead

Dec 14, 2014 | Vauxhall Cars & Trucks

1 Answer

Left front ,camber adjustment how?


I don't see what year your truck is. On the newer trucks. There's adjustment cams on the lower control arms. One at the front and one at the rear mount. They adjust camber/caster.

Oct 10, 2013 | Dodge Ram 1500 Cars & Trucks

1 Answer

How can I adjust the rear wheel alignment on my 2003 ford taurus?


Your adjustment bolts (ref: Fig.6)


http://www.ford-taurus.org/taurusinfo/Specs/RearSedan.jpg


1) Mark position of adjustment bolts with white marker, paint or whiteout.


2) Using a piece of string, stretch it between the rear wheels at the back of the wheels, and then again at the front of the wheels. You are trying to ascertain if the wheels are parallel or not.


3) If the wheels are not perfectly parallel, then turn the No.6 adjustment bolts clockwise or anti clockwise, evenly on each side, until the rear wheels are parallel with each other. Then retighten locking nuts on No.6 adjustment bolts.


By the way, this method will only allow you to align the rear wheels up to each other. To align the wheels with the vehicle's body you will require a laser alignment kit, which can only generally be found at a tyre centre or service-repair centre.

Nov 03, 2012 | Ford Cars & Trucks

1 Answer

How do i correct Rear camber on 2002 Lincoln ls


I don't think this vehicle is equipped with provisions allowing a camber adjustment in the rear. If there are adjustments provided, there will be cam bolts in the lower control arms for adjustment. If there are no adjustment bolts, and the camber is out, usually there will be something bent. Also check rear ride height which can affect camber for a broken spring.

Jul 01, 2012 | Lincoln LS Cars & Trucks

1 Answer

How do you adjust head light on 2001 ford escort?


headlights have 2 adjusting screws , one on the top that control vertical movement, and one on the side that controls horizontal adjustment , if thats what you needed good Luck, if you wanted to know how to complete the actual adjustment,, reply to this feed and I'll explain a simple method for you

Aug 28, 2011 | 2001 Ford Escort ZX2

1 Answer

2002 town & country hand break does not work, can still drive wth the hand break on


Set & release the handbrake 10 to 20 times. This action moves the adjuster slightly each time until the brake shoes adjust to a certain distance from the drum., if this method doesn't work, your going to have to locate the adjustment on the cable itself under the van it runs along the side rail , it could be the cable has stretched and may be past the point of adjustment,, or the rear brakes are worn

Jul 10, 2011 | 2002 Chrysler Town & Country

1 Answer

How to adjust camber on 2001 monte carlo


There is no camber adjustment from the factory,however moog sells a camber bolt kit that will allow for adjustment. About 20 bucks . If you are talking about the rear of the car,ride height makes a drastic change in camber. If the springs start to get weak the camber will go negative,spring spacers will correct this.

Jan 07, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I put all season radial size 225/60R16 on my car back tire on driver's side rub's on bottom of strut.


Has the vehicle been in any accidents on that particular corner of the vehicle may possible have a bent rear strut? Do you know if the rear camber is out of manufacturer spec Does the tire look like it leans in to far? GM did not provide a rear camber adjustment for this vehicle but cam bolts are available to correct some of this adjustment another option is elongating the one of the holes in the strut where the lower strut bolt attachs to the knuckle to provide adjustment. Would take this and have an alignment performed to see if if the rear adjustment can be corrected with suggested methods.

Nov 14, 2010 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...