Question about Suzuki Cars & Trucks

1 Answer

Keyless remote I have a 2008 swift sport with 1 original remote and am trying to code 2 spares I brought from eBay,.. Done the open door thing, press driver door switch 3 times etc etc, and doing the process car goes into receptive mode, though pressing remote open, we do not get the doors redoing the unlock lock immediately, though it does do it by itself after about 20 secs which we assume that its just reverting back out of receptive mode. The remote still does not respond, and using the spare is the same, is there something i am missing besides new battery and doing this procedure? HELPPPP

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 195 Answers

Hi Alan

what procedure you are doing for remote matching?
try this one and let me know.

1 Unlock the car, get in and close the door

2 Switch ignition on

3 Press the door lock button on the dash to lock the car

4 Press and hold the door lock button on the dash, the alarm will beep

5 Keep holding the door lock button on the dash, press and hold the lock on the remote,

the alarm will beep

Repeat (5) for the other remotes,

6 leave the door lock button on the dash, the alarm will beep, switch ignition off

Posted on Feb 13, 2014


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: keyless entry only works drivers door, car relocks

The window track may have some grit (sand or dirt) in it causing the window to drop down when it reaches to top of it's travel. This is because the safety feature which keeps you from choking yourself in an electric window works on resistance. Keep the track clean - a shot of WD40 in the track will clean it out. That should fix the window.

The lock problem may be a battery issue in the remote. Otherwise it sounds like it is in the anti-theft unit. Check for a loose ground issue.

Posted on Dec 02, 2009

  • 2418 Answers

SOURCE: Renault clio central locking fault

I believe you have to press the button very quickly 2 times. One time is just for the drivers door then two times very quick to unlock all..

Posted on Jun 06, 2010

Testimonial: "Brilliant!! Just tried that and it works. Thanks very much."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Factory remote start wont work. hit button horn bbeps all lights and radio come on. when horn beeps second time car wont crank as it always has in the past

Ford Keyless Remote Car Starter fix - YouTube

? 5:14
Jun 24, 2012 - Uploaded by mitch cox
I bought a 2010 Ford Raptor my remote starter won't work? when I press the .... 2013 lincoln navigator, 2-Way Remote StartSystem and i press button ... a Ford OEM 1-Way 100 Series Keyless Remote Start (CM5Z-19G364-A).

1998 to 2008 Lincoln Navigator Factory Transmitter Remote ...

? 3:00
Nov 2, 2012 - Uploaded by Lessco Electronics
1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door ...

2008 Lincoln Navigator Remote Start Accessories ' Th

Dec 12, 2015 | 2008 Lincoln Navigator

1 Answer

2008 HHR Remote Starter not working

Is this an issue with all 2008 HHR remotes??? Highly doubtful , probably the vehicles keyless entry system . Taking the vehicle to a qualified repair shop an having the keyless entry system checked for DTC'S - diagnostic trouble code's . Do you know what a DTC is ?
The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the body control module (BCM) to remotely activate certain vehicle features. Keyless entry will lock/unlock the doors, or release the rear compartment lid when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message to the BCM. A low transmitter or vehicle battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:
• Door locks
• Liftgate lock
• Remote rear doors (Panel only)
• Vehicle locator/panic alarm
• Illuminated entry lamps
• Remote vehicle start
The keyless entry system has the following components:
• Keyless entry transmitters
• Keyless entry antenna
• 2 Way Advanced Remote Start RCDLR

Guessing will not fix this .

Jan 12, 2018 | 2006 Chevrolet HHR

1 Answer

My doors wont unlock or lock with the remote keyless entry on both keys. one set of keys being the spare and never used it cant be the battery in the remote?

could be, try installing a new battery on the spare remote and retry,if it still doesnt work, then reprograming will be needed, try the battery first and let me know what happens.

Feb 26, 2010 | 2006 Suzuki Swift

1 Answer

Keypad door lock does not work..?

it's in owner manual. But, first you have to enter your original code and it must work. then you press the 1 button and then enter a new 5 digit code, then press the 1 button again.

Keyless Entry Keypad To unlock the driver front door (20124) , and disarm the anti-theft alarm control (19A366) , (if equipped):
  • Enter the permanent factory code.
  • Enter the owner's alternate code.
To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver door or luggage compartment. To unlock the luggage compartment door (40110), press the 5/6 button within five seconds of unlocking driver or passenger door(s). To turn on the courtesy lamps and light all illuminated components, lift either front door handle (22404) or press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time with all doors closed. (It is not necessary to enter the key code first.) This will turn off courtesy lamps and arm anti-theft alarm control (if equipped). To program an alternate code:
  1. Enter the five digit permanent entry code into keyless entry keypad .
  1. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code.
  1. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:
      • 9/0 — no memory recall
      • 1/2 — memory seat position 1
      • 3/4 — memory seat position 2
      • 5/6 — memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.
  • Keyless Entry Keypad Does Not Work Properly
  • Circuit.
  • Keyless entry keypad.
  • Electronic door lock control processor.

  • Open Fuses:
    • Town Car and Crown Victoria/Grand Marquis
    • Power Distribution Box (under hood)- K, 40A (Maxi)
    • Instrument Panel Fuse Panel - 17 (10A), 10 (20A), 8 (15A), 5 (15A) and 4 (10A)
  • Loose Connectors
  • Corroded Connectors
  • Oct 04, 2009 | 1995 Lincoln Town Car

    1 Answer

    I need to program the key fob

    . Enter 5-digit permanent entry code into the keyless entry driver door keypad. 2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then
    unlock confirming you are in programming mode.

    3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will
    cycle to indicate succesful programming.

    4. If you are programming more than one Keyless Remote (Including any exsiting remotes) Press
    any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again
    to indicate succesfull programming. (If the keypad light goes out before all remotes are
    programmed the entire process must be repeated).

    5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program mode.

    Jun 29, 2009 | 1997 Mercury Grand Marquis

    2 Answers

    Keyless remote not working on my suzuki sx4

    Try replacing the battery of your keyfob.

    May 27, 2009 | 2005 Suzuki Swift

    1 Answer

    Remote key fob does not unlock or lock car

    It may just be a battery problem. Replace the battery of your remote fob. If it will not work, try to reposition the controller beneath the dashboard.

    May 27, 2009 | 2005 Suzuki Swift

    2 Answers

    1999 lincoln con

    SECTION 501-14B: Keyless Entry/Computer Operated Locks 1999 Town Car Workshop Manual GENERAL PROCEDURES Programming —Keyless Entry Keypad Code
    1. Enter the permanent factory keyless entry keypad code.
    1. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds will erase all stored customer codes. The existing codes do not need to be erased to program new codes.
    1. Enter the new five-digit keyless entry keypad code.
    1. To associate the new code with personality positions 1, 2 or 3, press the 1/2 button within 5 seconds of entering the 5th digit of the new code for position 1 or 3/4 button for position 2 or 5/6 for position 3. The door locks will lock and unlock confirming the new code is programmed.
    1. If another code is to be programmed, begin entering the code within 5 seconds of the last button pressed.
    1. After all new keyless entry codes are programmed:
      • Press keyless entry keypad buttons 7/8 and 9/0 at the same time to exit the program mode.
      • Wait for 5 seconds; the driver door module (DDM) will exit the program mode automatically.
      • -------------------------------------------------------------
    Programming —Transmitter
    1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming program mode has been entered.
    1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
      Press any button on the transmitter to be programmed.
    1. If additional keyless entry remote transmitters are to be programmed, repeat step 2 within 7.5 seconds.
    1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
    Programming —Remote Memory Activation NOTE: This procedure must be completed within 5 seconds.
    1. Press the SET button on the driver door panel.
    1. Press any button on the keyless entry remote transmitter to be associated with a memory setting.
    1. Press the 1 or 2 memory button on the driver door panel.
    Programming —Autolock and Horn Chirp
    1. NOTE: This procedure must be completed within 30 seconds.
      Turn the ignition switch to RUN.
    1. Press the UNLOCK button three times.
    1. Turn the ignition switch to OFF.
    1. Press the UNLOCK button three times.
    1. Turn the ignition switch to RUN. The doors will lock and unlock to confirm entry into program mode.
    1. Press the UNLOCK button once to toggle the Autolock feature on or off, or twice to toggle the Horn Chirp function on or off. The horn will chirp to confirm toggling of the Autolock feature.
    1. Exit program mode by turning the ignition to OFF, START, or wait 7.5 seconds.

    Apr 07, 2009 | 1999 Lincoln Town Car

    2 Answers

    Reprogram a keyless entry remote

    this is how to program the remotes/keyless entry

    • Obtain all remote transmitters
    • enter the 5 digit permanent code into the keyless entry pad on the drivers door
    • Press the 1-2 switch on the keyless entry pad
    • Within 5 seconds
    • Press any button on the first remote transmitter
    • The doors should open then lock
    • Within 5 seconds
    • press any button on the second & third remote
    • within 5 seconds for each remote
    • to exit programming
    • simultanionusly press 7-8 & 9-0 switchs on the key pad or wait more then 7.5 seconds
    The 5 digit permanent code is located in one of the following places
    1. On the owners warranty card
    2. On the label on the inside the trunk/ boot
    3. On the owners code card
    4. On the centrel locking control module located in the drivers door
    5. In the PCM ford can get this for about $25.00
    I hope this help
    Regards Paul

    Jan 13, 2009 | 1995 Lincoln Town Car

    3 Answers

    Keyless entry

    I believe dealer has to re-program the new code.

    Aug 29, 2008 | 2001 Ford Explorer Sport Trac

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    213 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts


    Level 3 Expert

    78267 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides