Question about Cars & Trucks

Open Question

Amount to enter in adjustment column for form 8949 in columns G & H

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 bmw 525i .power seats

check the connection that goes to the driver seat disconect it and put it back in. once there is a lack of connection on your seat harness the stearing adjustment do not work or the seat move. you can contact me at amigotnt@yahoo.com if you have any further questions

Posted on Feb 01, 2009

michigan man
  • 3533 Answers

SOURCE: turn signals wont work in 1997 ford explorer xlt

it sound as if the problem is in you switch and you will need a puller to get the steering wheel off also take the negative side off the battery before you start and remove the fuse for the air bags as well if you have a library near you there you can get all of the pictures and diagrams so you can do the job easier

Posted on Feb 28, 2009

  • 1 Answer

SOURCE: 2002 Tahoe steering column wiring problems

The wiring harness that run the multifunction swith has broke. I took my column apart and soldered the wires back together for the mean time. I dont suggest tring to do that its not a good fix. i found your post looking for the harrness. If you disconnect the battery you disconnect the airbag system

Posted on Mar 03, 2009

rcampsr
  • 90 Answers

SOURCE: why is there an adjustable switch at the base of my steering column

Without seeing the vehicle or knowing the year and model, I would say the shifter is located on the steering column and what you are seeing is the transmission indicator switch, or neutral safety switch as they call it. It is used to keep you from starting the vehicle while in gear. Good Luck, RAC

Posted on Apr 18, 2009

emissionwiz
  • 75051 Answers

SOURCE: 2005 grand am smoke coming from steering column

a defective starter switch will cause this.

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Accessories stay on after key is removed


I would guess the the ignition switch at the base of the steering column has gone out of alignment. When you turn the key, a linkage goes down through the steering column to a large plastic switch mechanism that is bolted into place. There is a certain amount of adjustment that this switch has. If you can locate it, loosen it and slide it to the point where the accessories go off. The tighten it and try to start the vehicle. Moving it too far can cause other functions not to work. Keep fiddling with the adjustment until the vehicle works in all key switch positions correctly.

Nov 08, 2013 | 2004 Chevrolet Silverado 3500

1 Answer

Adjust height of Prizm steering wheel


Some Geo Prism's (and sister car Toyota Corolla) have adjustable steering columns, and some do not. The adjustment lever is on the left side of the steering column, underneath the turn signal arm. Pull this lever out...away from the steering column, and you will feel the entire column loosen for up and down positioning. To re-secure after fine tuning the desired height...push this lever firmly back into position beside the steering column. If your Prism does not have this lever...your car is not equipped with the adjustable optional column. Hope this helps.

Mar 19, 2012 | Ford F-350 Cars & Trucks

2 Answers

How to adjust clutch pedal on 86 mustang lx


clutch is supposed to be self adjusting. Here are instructions for replacing the adjuster:


REMOVAL & INSTALLATION


See Figure 1

  1. Disconnect the battery cable from the negative terminal of the battery.
  2. Remove the steering wheel using a steering wheel puller, Tool T67L-3600-A or equivalent.
  3. Remove the lower dash panel section to the left of the steering column.
  4. Remove the shrouds from the steering column.
  5. Disconnect the brake lamp switch and the master cylinder pushrod from the brake pedal.
  6. Rotate the clutch quadrant forward and unhook the clutch cable from the quadrant. Allow the quadrant to slowly swing rearward.
  7. Remove the bolt holding the brake pedal support bracket lateral brace to the left side of the vehicle.
  8. Disconnect all electrical connectors from the steering column.
  9. Remove the 4 nuts that hold the steering column to the brake pedal support bracket and lower the steering column to the floor.
  10. Remove the 4 booster nuts that hold the brake pedal support bracket to the dash panel.
  11. Remove the bolt that holds the brake pedal support bracket to the underside of the instrument panel, and remove the brake pedal support bracket assembly from the vehicle.
  12. Remove the clutch pedal shaft nut and the clutch pedal, as outlined above.
  13. Slide the self-adjusting mechanism out of the brake pedal support bracket.
  14. Examine the self-adjusting mechanism shaft bushings on either side of the brake pedal support bracket, and replace if worn.

To install:
  1. Lubricate the self-adjusting mechanism shaft with motor oil and install the mechanism into the brake pedal support bracket.
  2. Position the quadrant towards the top of the vehicle. Align the flats on the shaft with the flats in the clutch pedal assembly, and install the retaining nuts. Tighten to 32-50 ft. lbs. (43-67 Nm).
  3. Position the brake pedal support bracket assembly beneath the instrument panel, aligning the four holes with the studs in the dash panel. Install the four nuts loosely.
  4. Install the bolt through the support bracket and into the instrument panel. Tighten to 13-25 ft. lbs. (18-34 Nm).
  5. Tighten the four booster nuts that hold the brake pedal support bracket to the dash panel to 13-25 ft. lbs. (18-34 Nm).
  6. Connect the brake lamp switch and the master cylinder pushrod to the brake pedal.
  7. Attach the clutch cable to the quadrant.
  8. Position the steering column onto the four studs in the support bracket and start the four nuts.
  9. Connect the steering column electrical connectors.
  10. Install the steering column shrouds.
  11. Install the brake pedal support lateral brace.
  12. Tighten the steering column attaching nuts to 20-37 ft. lbs. (27-50 Nm).
  13. Install the lower dash panel section.
  14. Install the steering wheel.
  15. Connect the battery cable to the negative terminal on the battery.
  16. Check the steering column for proper operation.
  17. Depress the clutch pedal several times to adjust the cable.
  18. 714c4a4.gif

Sep 24, 2010 | Ford Mustang Cars & Trucks

1 Answer

How to change a ignition switch on a 1990 Z24 cavalier and a diagramof what to look for


Ignition Switch REMOVAL & INSTALLATION 1982–91 Vehicles The switch is located on the steering column and is completely inaccessible without first lowering the steering column. The switch is actuated by a rod and rack assembly. A gear on the end of the lock cylinder engages the toothed upper end of the rod.
  1. Lower the steering column; be sure to properly support it.
  2. Put the switch in the OFF-UNLOCKED position. With the cylinder removed, the rod is in OFF-UNLOCKED position when it is in the next to the uppermost detent.
  3. Unfasten the two switch screws and remove the switch assembly. Fig. 1: Removal and installation of the ignition switch and related steering column components — 1990 vehicle shown 87958059.gif
    Fig. 2: Exploded view of a steering column including the ignition switch — 1990 vehicle with standard column shown 87958060.gif
    Fig. 3: Exploded view of the steering column including the ignition switch — 1990 vehicle with tilt column shown 87958061.gif
    To install:
  4. Before installing, move the new switch slider (standard columns with automatic transaxle) to the extreme left position. Move the switch slider (standard columns with manual transaxle) to the extreme left position. Move the slider (adjustable columns with automatic transaxle) to the extreme right position and then move the slider one detent to the left (off lock). Move the slider (adjustable columns with manual transaxle) to the extreme right position.
  5. Install the activating rod into the switch and assemble the switch on the column. Tighten the mounting screws. Use only the specified screws, since overlength screws could impair the collapsibility of the column.
  6. Reinstall the steering column.

Sep 01, 2010 | Chevrolet Cavalier Cars & Trucks

2 Answers

Headlights go out while driving


Hi, sounds very like you have a broken or sandwitched wire in your column wiring. Chances are if you have a look at the wiring from the column with a torch, you'll be able to see the problem area & rejoin any suspect wires which should fix the problem, hope this does the trick :)

Apr 20, 2010 | 1999 Dodge Dakota

1 Answer

Ignition and column locked. what do i do?


if the key wont turn you can try this a locksmith showed me spray key hole with a small amount of wd40 put key in take the wooden end of a hammer handel and tap end of key not too hard.sometimes this will work until you can get fixed

Feb 13, 2010 | 1998 Chrysler Town & Country

1 Answer

How do I replace a keyed ignition switch in my 85 f-250


Removal & Installation

403ff30.gif
Blade-type connector ignition switch on steering column, 1980 and later models

  1. Disconnect the battery ground cable.
  2. Remove steering column shroud and lower the steering column.
  3. Disconnect the switch wiring at the multiple plug.
  4. Remove the two nuts that retain the switch to the steering column.
  5. Lift the switch vertically upward to disengage the actuator rod from the switch and remove switch.
  6. When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in LOCK position for correct adjustment.
To hold the mechanical parts of the column in LOCK position, move the shift lever into PARK (with automatic transmissions) or REVERSE (with manual transmissions), turn the key to LOCK position, and remove the key. New replacement switches, when received, are already pinned in LOCK position by a metal shipping pin inserted in a locking hole on the side of the switch.
  1. Engage the actuator rod in the switch.
  2. Position the switch on the column and install the retaining nuts, but do not tighten them.
  3. Move the switch up and down along the column to locate the mid-position of rod lash, and then tighten the retaining nuts.
  4. Remove the locking pin, connect the battery cable, and check for proper start in PARK or NEUTRAL.
Also check to make certain that the start circuit cannot be actuated in the DRIVE and REVERSE position.
  1. Raise the steering column into position at instrument panel. Install steering column shroud.

Nov 19, 2009 | 1985 Ford F 250

1 Answer

Repair of steering column


Try (autozone.com) sign up for free & enter your trucks info & go to service/repair manual & steering for pictures & step by step instructions.

May 17, 2009 | 1989 Ford F 250

1 Answer

2000 Mercury Villager: Is there a shift lever adjustment? When placing foot on brake pedal and pulling shift lever rearward it doesn't feel like the transmission is completely disengaging and it is...


You may have a loose shift linkage in the steering column. Remove the upper and lower plastic covers behind the steerong wheel (5 or 6 philips head) and see if you have any loose torx head or allen head screws. Ea
rlier models had this isue.

Also, go to this site for Villager Quest help.

http://autos.groups.yahoo.com/group/villagerquest/
Here's adjustment procedure too

SECTION 307-05: Automatic Transaxle/Transmission External Controls 2000 Villager Workshop Manual
GENERAL PROCEDURES Cable Adjustment —Shift Control
  1. Place the gearshift lever in PARK (P) position.
  1. Raise and support the vehicle. Refer to Section 100-02 .
  1. Remove the splash shield.
  1. Loosen the shift cable nut.
  1. Position the shift linkage in PARK (P) position.
  1. Tighten the shift cable nut.
b45630b.gif
  1. Move the gearshift lever through the entire shifting range.
  1. Verify that the engine will crank with the gearshift lever in PARK (P) or NEUTRAL (N) position.
  1. Adjust the transmission range (TR) switch as necessary, refer to Section 307-01 .
-------------------------------------------------
8d76d60.gif
Item Part Number Description 1 043B13 Driver side air bag module 2 — Steering wheel nut 3 3600 Steering wheel 4 — Radio volume control cover 5 — Air bag sliding contact electrical connector access panel 6 — Cruise control cover 7 14A664 Air bag sliding contact 8 13K359 Multifunction switch 9 — Tilt wheel lever 10 13318 Turn indicator cancel cam 11 — Steering column assembly 12 — Steering column mounting bracket nuts (4 Req'd) 13 3C695 Lower column shroud 14 — Steering column opening cover nuts (3 Req'd) 15 — Steering column lower yoke bolt 16 3N725 Steering column lower yoke 17 — Steering column clamp bolt 18 3C695 Upper column shroud 19 7210 Gearshift lever

May 05, 2009 | 2000 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...