Question about Subaru Loyale

Open Question

Can not locate high beam headlight relay on pajero nt 2009

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Low beam headlights don't work

I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.

Toyota Ed

Posted on Jan 02, 2009

Ad
  • 2 Answers

SOURCE: 1994 Mercedes c280 high beams not working...

At first 1994 C280 high beams began to not connect regularly when stick pushed forward, then not at all. Drove high beams by pulling and holding stick back towards steering wheel until that stopped working, too. Shop said the turn signal switch was at fault-- had seen it many times before with W202; about $160 to replace. Haven't done it yet, but should be an easy fix?

Posted on Jun 24, 2009

  • 1986 Answers

SOURCE: What kind of bulbs are in the 2009 nissan maxima

High beams are H9

Low beams are H11 if you have halogens or HID-D2R if you have HID

Posted on Nov 13, 2009

  • 23 Answers

SOURCE: camry headlights not working

Have you checked out the switch itself? Seems like the problem might be there.
If the lamp bulbs are sill intact, that's probably the most likely solution. There's a possibility you have a short somewhere in the switch relay that will allow the highlights to turn on but not the low beams.

Posted on Mar 25, 2010

ftw1952
  • 10319 Answers

SOURCE: The high beam indicator is on. The low beams don't work.

You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

He headlight for toyota camry 2009 from malaysia cannot get to high beam. low beam is ok. fuses relays and bulbs as well as the switch is ok.


Is the bulb ok sometimes you hit a bump real good and pops
the bulb check owner at bulb socket no power relay headlight
in enginecompartment

Jun 23, 2015 | Toyota Cars & Trucks

2 Answers

Why don't my headlights work on my 2009 Mercury Grand Marquis?


Low Beam, and High Beam both are not working? There is a fuse you can check, review your owners manual for location, also could be headlight switch itself? Please check bulbs before expensive diagnosis...some times both bulbs blow out at the same time:( Hope this helps.

Aug 28, 2014 | Cars & Trucks

1 Answer

High beam headlight relay located


there is a fuse for that circuit in the fusebox lower dash if this is ok check that your getting power to the high beam wire at bulb holder if not the part of switch for high beam isn't working if are getting power check the bulb holders for warping etc as can get very hot and mishapen so that the bulb doesnt always sit on the contacts but if bothe lights out i'd think its a power supply problem

May 01, 2014 | 1995 Subaru Impreza

1 Answer

Low beam lights wont turn on only brights


first thing try a new bulb or test the plug connection at the headlights for high beam and low beam i have seen the 2 bulbs burn at same time so check if you have power and ground at the headlights and no fuses burnt

Jan 28, 2014 | 2009 Saturn VUE

2 Answers

My low beam headlights do not work as daytime running lights or manually with the headlight knob pulled out . The high beam headlights however do work if I have the knob pulled out all the way with the...


Check out your fuse associate with the low beam headlight, secondly there is a relay fuse under fuse rely box under the hoos. Locate this box, and locate the relay fuse associated to the low beam. You can rotate the relay with another relay of the same spec to see if the low beam lights are coming on. I would believe that it is a fuse that is blown, check your owners manaual on the location of the fuse box. Usually it's located in the driver side kick panel.

Jan 30, 2011 | 2001 Buick Regal

1 Answer

Headlights went out. Replaced bulbs and switch and still lights don't work. Fog lights and high beams work? What else can work?


If high beams work and low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of these relays located next to each other. One controls the low beam headlights and the other the cooling fan. Swap the relays and check your low beam headlights. If the low beams work you have a bad relay.

Sep 20, 2010 | 2006 GMC Envoy

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

1 Answer

Headlights? both bulbs good,one headlight only or


You have 1 high beam relay and a lo beam relay located under the hood. You also have 4 fuses under the hood, 2 are for high beam 10 amp and 2 for the low beam 1 is a 20 amp and the other is a 15 amp fuse. Remove the top off the fuse/relay power distribution center and look inside the top. It will tell you the location for each fuse and relay. hope this will help you.

May 12, 2010 | 2001 Dodge Caravan

4 Answers

Headlight main beam not working


Strange headlamp problems on Saabs can often be attributed to a failing Headlamp relay. Here are a few common situations:
Issue1 - Headlamp switch will work backwards: Turn on the switch and theheadlights go off and turn off the switch and the headlights will goon.
Issue 2 - High beams will disappear. You will have nohighbeams. Be sure to check the headlight bulbs PRIOR to ordering therelay. Remember however that it is possible for both high beams burn out at the same time
Issue3 - High beams will not work only the low beams will.
Issue 4 - A single bulb setting (low or high) on either side will not work and bulb replacement will fix it.
You can sometimesfix these issues by removing the relay, taking off the cover andresoldering the connections on the relay bottom. To perform this repair, go to my illustrated tutorial at customsaab.com.
In some cases youwill have to replace the relay to effect a long term cure. The aftermarket replacement can be had at Eeuroparts.com for about $60.00:
Name: Bulb Check Relay
Part Code: 4109070A
Brand: sm_311e0dbd-c670-4bed-a50a-1ba3424ef87d.jpg
Description: Bulb check relay for any 9000 92-98, 900 94-98, 9-3 99-03, 9-5 all.

KAE (Kaehler) made in Germany.
Price: $59.90


Nov 19, 2008 | 1999 Saab 9-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...