Question about 2006 Pontiac G5

Open Question

Low heat in pontiac g5 - 2006 Pontiac G5

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should the resistance be on a camshaft position actuator on a 2009 Pontiac G5 2.2L engine


Component Testing
  1. Measure the resistance of each CMP actuator solenoid valve assembly. Resistance should be between 8-12 ohms.
  2. Connect a jumper wire between the CMP actuator low reference circuit at the solenoid and a good ground. Connect a fused jumper wire to the CMP actuator high control circuit at the solenoid. Momentarily touch the fused jumper to B+. Observe the spool valve inside the CMP actuator. The spool valve should move from fully closed to fully opened position.
Service Information










2009 Pontiac G5 ' Cobalt, G5 (VIN A) Service Manual ' Engine ' Engine Controls and Fuel - 2.2L or 2.4L ' Diagnostic Information and Procedures ' Document ID: 2113210

May 05, 2016 | Pontiac Cars & Trucks

1 Answer

Can't find horn fuse pontiac G5 2008


On this website (link below) you find fuse box diagram and description for Pontiac G5 (2008)


Pontiac G5 2008 fuse box diagram Auto Genius

Mar 28, 2015 | 2008 Pontiac G5

1 Answer

Blower motor for pontiac 2007 g5 not working


blower control module ( blower resistor) goes bad on all gm models it is located inside the car on passenger side of hvac case.

Nov 24, 2013 | 2007 Pontiac G5 Gt Coupe

1 Answer

Which fuse controls ignition on pontiac g5


On this website (link below) you find fuse box diagram and description for Pontiac G5 (2007)

Pontiac G5 2007 fuse box diagram Auto Genius

Nov 23, 2013 | 2007 Pontiac G5 Gt Coupe

1 Answer

2009 pontiac g5 low pressure port location


Leave A/C work to the trained professional
Most likely is empty & need to have a leak repaired
& then vacuumed,before charging
You can't do that & those store bought hose things are
junk. Need knowledge to work on any refrigerant system

Jul 09, 2013 | Cars & Trucks

1 Answer

I have a 2008 pontiac g5 and when the air conditioner is on it is blowing hot air instead of cold


sounds like you need to have your AC serviced, alot of times the compressor wont kick on when you are low on freon.

Mar 23, 2011 | 2008 Pontiac G5

1 Answer

What does the I stand for on the shifter of an automatic G5?


It is for "low" gear. It is used for going down VERY steep hills. It keeps the car in low gear so you don't have to ride the brakes as much.

Jan 08, 2011 | 2007 Pontiac G5 Gt Coupe

1 Answer

Where is the fuse box for door locks in the pontiac g5


On this website you find fuse box diagram and description for Pontiac G5 (2006 - 2007)


Pontiac G5 2007 fuse box diagram Auto Genius

Jan 02, 2011 | 2006 Pontiac G5

1 Answer

2007 Pontiac G5 heat won't work


you can have two things wrong with your car 1 a/c control head is bad. 2. temp blend door actuator is bad. change actuator first. make sure you install it before you plug the connector.

Oct 15, 2009 | 2007 Pontiac G5 Gt Coupe

1 Answer

Exhaust pinging


it is the exhaust actually cooling down, this is fairly normal especially in brand new vehicles or vehicles with new exhaust. the metal used in the exhaust expands with heat you shut the car off and the heat goes away so metal contracts. nice car by the way, my neighbor around the corner just bought a black one. good luck

Mar 07, 2009 | 2008 Pontiac G5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...