Question about Buick Cars & Trucks

Open Question

Code u1064 Check engine light

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 400 Answers

SOURCE: U1064 code & can't check the codes on a

Sounds like a blown fuse to one of the computers, either the ECM (engine control computer) or the BCM (body control computer). The ECM fuse should be under the hood and the BCM fuse in the cabin. The U1064 means a loss of communication on the data line between computers (64 usually is the BCM). If the computers can't communicate they will shut down the engine and set trouble codes. The other issue could be a faulty ignition switch not allowing power to a computer (but not common for cavaliers or sunfires). If fuses are good, chances are you have a faulty computer somewhere in the data line, shorting out communication.

Posted on Feb 24, 2011

Ad
  • 90 Answers

SOURCE: What do these check engine light codes mean? I

As previous post stated you may have data cable unhooked somewhere.
B0040- Second Row Right Frontal Stage 2 Deployment Control (Subfault)
B0099- Right Frontal Restraints Sensor 2 (subfault)
U1026- Loss of Active Transfer Case Control Module Communications.
U1064- I do not have a listing for that code on hand. May be able to obtain it when I get to my shop tomorrow.

Posted on Oct 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Pontiac grand am 2000 I'm getting codes u1000 and u1064


U1000 means modules on the data line have stopped seeing communication with a module. U1064 is a communication code for the BCM. It may be faulty or not communicating for some reason. If it has been changed it needs to be programmed.

Sep 03, 2015 | Pontiac Cars & Trucks

1 Answer

What is abs code u1064?


Just type it online "U1064", you find answer right way

Aug 13, 2014 | 2006 Chevrolet Colorado

1 Answer

What does the ecm fuse under the hood of my colorado 2005 i5 look like


These should be labelled in the fuse block. If not, shop manual should help.

Apr 03, 2014 | 2005 Chevrolet Colorado

1 Answer

Check engine light codes


the c0899 is a low battery voltage and the u1064 means communication is lost with the bBody Control Module. The u1026 is also a communication problem and the p0449 is an emissions problem, around the venting of the fuel tank. Sounds like several different unrelated problems.

Oct 22, 2013 | 2007 GMC Canyon Crew

1 Answer

U1064


U1064 - Loss Of Communications With DIM

May 20, 2013 | Chevrolet Cars & Trucks

1 Answer

What do these check engine light codes mean? I can't find them anywhere. B0040, B0099, U1026, U1064


As previous post stated you may have data cable unhooked somewhere.
B0040- Second Row Right Frontal Stage 2 Deployment Control (Subfault)
B0099- Right Frontal Restraints Sensor 2 (subfault)
U1026- Loss of Active Transfer Case Control Module Communications.
U1064- I do not have a listing for that code on hand. May be able to obtain it when I get to my shop tomorrow.

Oct 14, 2011 | 2005 Chevrolet Colorado

1 Answer

What is code u1000 and u1064


U1064 Lost Communication With Body Control Module (BCM)

U1000 Class 2 Data Link Malfunction

Do your door locks, power windows, etc. still work? I'm assuming this is for a Pontiac since that is the picture that comes up with your question. I'm still getting used to this new site.

Sep 29, 2011 | 2001 Pontiac Aztek

1 Answer

I took my 2004 Blazer to get a diagnostic check. Two codes came uo U1064 and U1096. What are some solutions to fix this problem? The instrument panel lights stay on after the car has been started and will...


U1064 - Loss of Communications with DIM (Dash Integration Module)
Here is some TSB

Refer to Data Link Connector (DLC) Schematics

Circuit Description
The class 2 serial data line communicates information between modules. Each module connected to the serial data line is assigned a recognition code, or address. This code is used in order to identify which modules are communicating. Modules communicate with each other by periodically sending state of health (SOH) messages. When the ignition switch is in RUN, each module communicating on the serial data line sends a SOH message every 2 seconds. This ensures that the system is operating properly. When the dash integration module (DIM) stops communicating on the class 2 serial data line, the SOH that is normally sent on the serial data line every 2 seconds disappears. The module, which expects to receive that message, detects the absence of the message. The module in turn sets DTC U1064 associated with the loss of SOH of the DIM.

Conditions for Setting the DTC
The module does not receive a state of health (SOH) message back from the DIM. The module retries the request 3 times, and then sets DTC U1064.

This DTC only sets if U1300 or U1301 is not current.
Action Taken When the DTC Sets
DTC U1064 is stored in the module.

The module uses the default values for the initialization data. This DTC does not cause driver warning message to appear.

Conditions for Clearing the DTC
This DTC clears (status changes from current to history) under any of the following conditions:
The module detects a state of health message from the DIM.
At each ignition cycle.
A history DTC clears after 50 consecutive ignition cycles if the conditions for setting the DTC are no longer present.
Current and history DTCs may be cleared using a scan tool.

Diagnostic Aids
DTC U1064 does not normally represent a failure within the module.
When loss of class 2 serial data communication DTCs (DTCs with the letter U as the prefix) are stored as history DTCs, know all possible serial data DTCs set in each module before diagnosing the serial data line.

If U1064 is stored in the module memory, inspect for the same DTC stored in other modules capable of storing this DTC.
If the DTC is a history DTC, the problem may be intermittent.

Test Description: The numbers below refer to the step numbers on the diagnostic table:

U1064 is the result of loss of communication with the dash integration module (DIM). Note that other modules on the class 2 serial data line may also set U1064 if the DIM is not communicating with the serial data line.

Clear all DTCs after the repair procedure is complete.
Step
Action
Value(s)
Yes
No

1
Did you perform the Data Link Communications Diagnostic System Check?
--
Go to Step 2
Go to Diagnostic System Check - Data Link Communications

2
Use a scan tool in order to attempt the establish communication with the dash integration module (DIM).

Does the scan tool communicate with the DIM?
--
Go to Step 3
Go to Diagnostic System Check - Body Control System in Body Control System.

3
Inspect and repair the class 2 serial data line CKT 1807 (PPL) for intermittent connections. Refer to Intermittents and Poor Connections Diagnosis in Wiring Systems.

Is the repair complete?
--
Go to Step 4
--

4
Turn off the ignition switch.
Reconnect or install any connectors or components that were disconnected or removed.
Turn on the ignition switch.
Clear any DTCs.
Is the repair complete?



U1096 - Loss of Communications with IPC

The computers on the Chevy require a certain voltage to operate and if the voltage drops below a preset limit then it will tripper a loss of communication with the other modules, this drop in voltage happens when the car is started and the draw on the starter uses a large amount of amperage. I suggest to check power/ground in the instrument cluster and if good do a resistance test on Data wire.

If your car is not experincing any messages like "service vehicle soon" and no warning lights are illuminating then disregard these codes.


Hope helps.

Apr 06, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

U1064 code & can't check the codes on a scanner. engine starts & dies. when it was running the abs light & brake lights were on & theft & service lights were on.


Sounds like a blown fuse to one of the computers, either the ECM (engine control computer) or the BCM (body control computer). The ECM fuse should be under the hood and the BCM fuse in the cabin. The U1064 means a loss of communication on the data line between computers (64 usually is the BCM). If the computers can't communicate they will shut down the engine and set trouble codes. The other issue could be a faulty ignition switch not allowing power to a computer (but not common for cavaliers or sunfires). If fuses are good, chances are you have a faulty computer somewhere in the data line, shorting out communication.

Feb 24, 2011 | 2004 Pontiac Sunfire

1 Answer

1998 Chev Blazer,4WD light comes on Code U1064.


check control box on pass. side,under kick panel,check elect.connector for corrosion,usual suspect! on 96 and later blazers with elect,shift,hope it helped!

Mar 24, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...