Question about 2010 Acura ZDX Automatic

Open Question

2010 zdx acura won't start or jump start,the lights flicker, brakes are hard as rock when trying to start motor.

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: car won't start and dash light flickers

Unfortunately this is a ongoing problem but easy to solve!
lets just fix it , carefully take off the cowling that surrounds the steering wheel column. drop the column down with the tilt lever. bottom piece should come off pretty easy. phillips screws +, lefts loosy, under the column . need to get to bottom left of column, facing is.
when you can see the opposite end of the solid tube shaped piece directly across where you stick the key in... there is a wire loom screwed to that side with 2 screws, take it off and clean ALL the brass top rounded pieces sticking up.WAIT! dont break it its expensive!! dealer only! so clean it with a toothpick and dont try to take it apart, just scrape it a little with the toothpick. just the toothpick , take your time and get off all the little hills and junk. so clean the inside of the steering column as well, not as sensitive a part but use care. a soft rag can be used but careful not to snag a spring or somthing, shouldn't have to bend it at all, so DON'T, just clean it again, maybe you missed a spot, replace carefully.
when screwing cowling back together fit all cowlings right into place before inserting screws, all fits together straight and easy so finesse it a little and when you put in the screw, go left a little till you feel it drop in , so as to go into the same threads ,don't make the screws very tight, just enough to hold , No more, its plastic

Posted on Feb 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2010 Acura TL I put it in neutral and push it in my garage and now when I try and start it it says SVA service I tried to disconnect the battery and reconnected it and it still doing the same...


You could try leaving the battery unplugged for 12 hours to try and get a full reset. Before reconnecting to the battery, carefully touch the metal on the positive and negative leads together (not on the battery, the leads together). In some cars it takes that to do a full reset. Then put the key in the ON position for a few minutes, then start. If that doesn't work, I'm afraid you are going to an Acura dealership so they can pull/reset the codes. Check to see if your brake lights and cruise control still work. These systems are related on that car.

Feb 16, 2015 | 2010 Acura TL

1 Answer

How do I fix the radio and navigation system in my 2010 Acur zdx? Since I changed the car battery, the radio and navigation system won't come on


You have to have the manual and paperwork for the car. These came with codes for the systems. If you don't have the papers, then you will have to go to a shop(that has the right scanners) or the dealer to have them reset. The systems should have been disabled before the battery was changed to avoid this problem. again, the codes would be needed or lug a charger into the power outlet socket.

Nov 30, 2014 | 2010 Acura ZDX

1 Answer

Keyless entry not working


check that battery in the key fob

Jan 17, 2014 | Acura Cars & Trucks

1 Answer

Car won't start. All batteries are new.


I unfortunately don't have a solution, but I'm having the exact same problem with my 2010 Cube.

Oct 08, 2012 | 2010 Nissan Cube

2 Answers

My Acura zdx remote stopped working after my car got towed,alarm went off and I had to use key to stop the alarm . I cannot use my alarm again how can I get back to remote key again?


check your manual for remote programming. may have to reprogram remote control or leave car running so it can all reprogram to factory settings

Oct 28, 2011 | 2010 Acura ZDX

2 Answers

Brake pedel hard,can't get fluid to back brakes,


You need to replace the round Ball (accumulator ball). It's not holding pressure. You have front brake only. Is the pedal hard as a rock, the red brake light stays on, abs light stays on?
Check out this sight. http://www.albeedigital.com/supercoupe/articles/abs-system.html

May 03, 2009 | 1990 Ford Thunderbird

1 Answer

2003 megane won't start


dump it its a renault,dealer only encrypted software

Nov 17, 2008 | 2003 Renault 181

Not finding what you are looking for?
2010 Acura ZDX Automatic Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...