Question about 2002 Ford Mustang

Open Question

2002 mustang brake lights fuses change - 2002 Ford Mustang

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

seans46
  • 161 Answers

SOURCE: mustang brake lights dont work

this car has a brake light switch on the pedal check for power in and out. if in and not out change switch. also I believe their is a relay under the hood . then check to see if the multifunction and hazard switch control brake lights i cant remember if they do like gm's but i am also almost sure they do the multifunction is your turn signal wiper arm that goes into steering wheel . after you check the brake switch and relay have some one jiggle the hazard and multi while pressing the brakes see if they come on. you can call ford and ask them about the multi and hazard .

Posted on Jun 02, 2009

  • 157 Answers

SOURCE: 2003 mach1 mustang, no brake lights, no cruise control

Check the fuses, if they are blown, make sure they are the right size. If not, do not use bigger fuses than the circuit is supposed to have. If they are too small, use the correct size. If they are, do you have any extra equipment using the same circuit? Like a stereo or GPS or an alarm system? Move them to a different circuit. Check the relays to see if they are defective. Check all the bulbs to make sure they are the right ones too. Make sure they are in the right way. Check grounding wires, make sure they have good connections.

Posted on Aug 26, 2009

  • 708 Answers

SOURCE: ford f150 2002 has no brake lights

yes there is. Above the brake pedal there is a switch tat turns the lights on when you press the pedal. It is tough to replace due to the lack o room to put your hands. but is an inexpensive part.

Posted on Oct 06, 2009

Testimonial: "i have already replaced that switch and still no lights, thanks though, i appreciate your time and help"

Ford Guroo
  • 71 Answers

SOURCE: brake lights stopped working 1998 mustang

Fuse panel is under the dash also as I have found with my own graceful daughter, there is a brake light switch that connects to the brake pedal itself. It is hard to get to and even harder to see but a lot of times these switches get bumped and they can not make connection when the brake pedal is depressed. Hope this helps

Posted on Feb 07, 2010

  • 11 Answers

SOURCE: how to change brake light on 92 mustang

open up your trunk and pull back carpet some cars you can grab the light harness and twist it and it will pull out then pull out bulb and replace the bulb but sum cars you will have to remove acouple bolts and pull out the whole taillight lens from outside the car then the rest is the same

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

2 Answers

2006 brake light will not go out


Light gets power from brake light switch/.May be switch got shorted an brake light getting non-stop power causing it not to turn OFF brake light.

Get the brake light switch checked. Check volt at brake light switch.

It can be faulty brake light switch causing the problem or its wiring short for switch.

==========

To trouble shoot brake related problem, check the help links mentioned below:-----


Click the link:----

1996 Buick Regal Grand Sport Brake light Switch Location?

http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------

No brake lights on Buick?

http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------

Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------

How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------

How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------

Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------

1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------

How to replace rear Brake lights on 2004 Toyota RAV4?

http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------

One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------

Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------

Brake lights not working

http://schematicsdiagram.blogspot.com/2012/11/brake-lights-not-working.html

-------

2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------


These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Case 4210 wiring diagram


It can be faulty brake light switch causing the problem or its blown brake light bulb.First check and confirm brake light lamp is working and that's not the case.
==========
To trouble shoot brake related problem,check the help links mentioned below:-----


Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html
----------- No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html
---------- Brake lights not working on 1989 BUICK REGAL? http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe? http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html
---------------How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch? http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html
------------1996 Chrysler LHS brake light circuit wiring diagram? http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html
----------How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html
------------
One brake light on driver side not working, but other lights work? http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

---------- 2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram? http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html
-------------Overhead Brake lights not working on 1999 GMC Sierra 4x4? http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html
---------2004 Ford Mustang: Brake light Fuse Location? http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html
---------These will help.Thanks.

Nov 23, 2012 | Cars & Trucks

1 Answer

Brake lights on 1993 ford mustang doesnt work


Did you change the bulbs? It might also be bad wiring. You can check the wiring by using voltmeter connected to the brake light and then have someone depress the brake pedal. If there is not 12- 14 volts on the meter then you most likely have a loose or broken wire somewhere.

Sep 10, 2012 | 1993 Ford Mustang

1 Answer

2004 ford mustang mach 1 brake lights dont work dont have manual to change the fuse


I don't believe there is a separate fuse for the high-mount brake light. Never was on older cars, that brake light is just spliced into the rear brake lights. Have you checked the bulb?

Jul 11, 2012 | Cars & Trucks

2 Answers

2004 mustang will not shift out of park and no brake lights


check the brake light switch. Also check for a broken wire at the switch connector. The brake light switch is located on the brake pedal.

Aug 02, 2011 | 2004 Ford Mustang

2 Answers

2004 ford mustang coupe brake lights dont work dont have manual to change the fuse


pull out 1 fuse at a time and look at the wire trace inside if it looks broken or black, replace it. if it looks good. put it back in and keep trying

Jul 31, 2010 | 2004 Ford Mustang

1 Answer

I have a problem with the brake litesthe shifter does not come out of parkand now it wont start. The starter and battery sound strong just wont turn over could they all be connected with the brake pedle...


CHECK BRAKE LIGHTS FUSE.IF FUSE OKAY.BRAKE LIGHT SWITCH IS BAD.VECHICLE NOT SHIFTING OUT OF PARK PROBLEM COULD BE BLOWED FUSE OR CLUTCH PEDAL SWITCH FOR MANUAL TRANSMISSION OR TRANSMISSION RANGE SENSOR FAULTY AND PROBLEM IN BRAKE LIGHT SWITCH IF FAULTY IT WILL KEEP THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID FROM WORKING KEEPING YOU FROM GETTING VECHICLE OUT OF PARK.IF BRAKE SWITCH IS GOOD.PROBLEM IN THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID.

Jul 16, 2010 | 2002 Ford Mustang

2 Answers

Brake lights stopped working 1998 mustang


Fuse panel is under the dash also as I have found with my own graceful daughter, there is a brake light switch that connects to the brake pedal itself. It is hard to get to and even harder to see but a lot of times these switches get bumped and they can not make connection when the brake pedal is depressed. Hope this helps

Feb 06, 2010 | 1998 Ford Mustang

1 Answer

My 20002 mustang v6 its automatic


To shift from "P" to "R", there is a swicth that allows the shift button on the shift lever to be depressed. For this switch to work, the ingnition switch must be "ON" and the brake pedal depressed. If all yor brake lights went out (or if your brake switch on the pedal fails to work), then the shift switch wont work and you can not shift out of "P".

Jan 26, 2009 | 2002 Ford Mustang

Not finding what you are looking for?
2002 Ford Mustang Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...