Question about Isuzu Rodeo

Open Question

How to remove back cover of 2013 Hino side mirror

I just need to know if there is anything holding the back cover on the 2013 Hino side mirror or can I just pry it off? Thanks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Replace passenger side power mirror clearance lamp (bulb only).

If you are facing the passenger side mirror adjust the top (large) mirror so that it is turning in towards the truck as far as it will go. Then look behind the mirror in the bottom righthand corner (outside bottom corner) and you will see a silver metal clip. Take a straight head screw driver and push on that clip and the lens will pop out. Then you simply unscrew the bulb holder from the lens and replace your bulb. Good luck!

Posted on Oct 27, 2008

Ad
  • 23 Answers

SOURCE: Changing Door Mirror Glass XJ6(X300)

just clips into place use wd40 and be very carefull

Posted on Feb 25, 2009

raffaiel
  • 209 Answers

SOURCE: drivers side mirror needs replaced - how do i remove the little panel inside without breaking anything I shouldn't

just use a flat screw driver to take it off, it just have a clip inside.

Posted on Apr 21, 2009

  • 1986 Answers

SOURCE: remove passenger side mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: How do you install side mirror infiniti m45 2003.

If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Posted on Oct 30, 2009

Testimonial: "Thank You...whole panel needed to come off."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace drivers side mirror assembly, could use a diagram or instructions.


there is probably a small cover on the 'back' part of the mmirror housing, by the corner front part of the window/door=pry it back, it will expose small bolts/screws that hold the housing to the door.

Dec 23, 2010 | 2006 Toyota Corolla

1 Answer

How to install 2006 xA driver side mirror?


just the mirror or the entire housing ???

just mirror
  • remove old mirror (pry out)
  • unscrew from holder
  • screw new mirror into holder
  • press holder back into housing
entire housing
  • open door
  • pry off mirror shield (might need to unscrew) the shield is inside the door which hides the bolts holding the housing
  • unscrew housing
  • remove power cable (if any)
  • plug in cable to new housing (if any)
  • bolt the new housing in place
  • replace shield.

Sep 14, 2010 | 2006 Scion xA

2 Answers

How to replace driver side mirror on 1999 GMC Jimmy. Just need steps for removing old one and can take it from there. Thanks!


if there is a plastic cover directly behind the mirror on the inside of the car it should come off by gently prying it with a flat blade or screwdriver around the edge of it as most are held on by plastic clips.
Once it is removed it will expose the nuts or bolts that hold the mirror to the door but dont forget to remove the electric wire plug that leads to the mirror

Jun 09, 2010 | 1999 GMC Jimmy

1 Answer

Replacing passenger side mirror on a 2002 Forester.


it not too hard to do,you may be able to replace by removing the cover on the inside of door, then remove the nuts holding the mirror on, then disconnect electrical connector, you may need to pry panel back a little to get to the electrical plug, the panel pops out on that side, no need to completely remove, to remove all the way then you would need to remove the screws, but not needed, just pop loose in the area near mirror to get to plug then install new one.

May 13, 2010 | 2002 Subaru Forester

1 Answer

How to replace mirror in toyota corolla


1) Disconnect the Corolla's negative cable to the battery.

2) Remove the triangle-shaped interior mirror cover from the top of the
door panel. Pry the cover off with your hands, a blunt plastic or
wooden tool to prevent damage to your door trim.

3) Take out the mirror wiring connection.

4) Remove the door trim bracket around the mirror. Take out the
mounting nuts.

5) Pull the power mirror off the Toyota Corolla.

1) Put the new mirror in place on the Camry.

2) Re-install the mounting nuts making sure they are securley holding
the mirror in place. Replace the mirror insulation.
3) Reconnect the wiring to the new mirror.

4) Install the triangle interior cover by snapping it back in place.

5) Connect the negative battery cable.


Thanks
Xeeshan

Nov 22, 2009 | 2005 Toyota Corolla

1 Answer

I need to replace my 2001 gmc jimmy passenger side mirror, the whole thing. i already perchased a new mirror, i just need to know how to get inside and unhook the wires and screws so i can get my new one...


Very simple....but take your time.

Pry the plastic cover off from the interior side of the mirror. Once you have that popped off, unfasten the mirror, have some one hold the old mirror from the outside. Pull up on the mirror assembly and the wire harness to should become visible. Unclip the harness, toss the old mirror and reverse installation of your new one.

That's it!....But take your time!

Jul 16, 2009 | 2001 GMC Jimmy

1 Answer

Replacing driver's side mirror on Kia Sorento


These instructions are for a 2013 Kia Sorento (Passenger Side Mirror)



1) remove speaker cover on inside door panel:



3_18_2013_2_40_43_pm.jpg
2) Use a small screwdriver to pry it away from the door. Be careful of the paint:
3_18_2013_2_41_45_pm.jpg

3) The panel will expose the 3 main bolts that need to be removed:
3_18_2013_2_43_24_pm.jpg

4) The cable harness needs to be removed this is located behind the door panel. Remove the one screw behind the screw cover:
3_18_2013_2_44_56_pm.jpg3_18_2013_2_45_02_pm.jpg3_18_2013_2_45_08_pm.jpg

Once the one screw is removed it will allow you to move the door panel enough to get to the harness and the 2 bottom bolts.

Here is how the harness looks:



3_18_2013_2_46_36_pm.jpg
Once the harness is removed and the 3 bolts removed the mirror will come out.

Repeat the steps to re install your new mirror.

Dec 25, 2008 | 2004 Kia Sorento

1 Answer

2004 Honda Accord Passenger Mirror


Lower the glass all of the way.

Carefully pry out the mirror mount cover by hand. This is inside of the door. Pry up from the bottom and pull out at the top.

Then unplug the electrical wiring harness clip.

Now take the three nuts off and hold the mirror once all three bolts are out the mirror will come right out.

Dec 08, 2008 | 2006 Honda Accord

1 Answer

How do you replace the wing mirror cover ?


hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror cover and press them in and pull black cover down then with a small pry tool carefully prise mirror glass out and disconect wires this will reveal the small single screw that holds the cover to the mirror unit remove this and the rest should be self explaned hope this helps..

Aug 04, 2008 | 2007 Audi A4 Convertible

2 Answers

Door panel removal


I replaced the passenger side mirror on my 1998 Bonneville.
(Thanks to VWmechanic for his helpful post re a 1997 Bonneville; my '98 was a little different.)
First, remove the door panel, as follows:
1. Remove hex-head screw under inside door handle.
2. Remove 10mm screw located under armrest hand grip (to get at it, pop off the piece that covers the tiny courtesy light)
3. Using a screwdriver, pry off the panel. It's held on by several plastic, pop-off fasteners.
4. Remove the plastic red lock slider under the door handle. It can be pried off the wire slider.
5. Lift up on the door panel to release the top edge. You now have access to the inside of the door.
6. To get at the two bolts holding the mirror to the sheet metal of the fender, remove the plastic shield just under the bolt location.
7. Remove/fasten the mirror bolts with a 10mm. I could reach the front bolt with an 8" socket extension, but had to use a 10mm open wrench on the back bolt.


May 28, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...