Question about Cars & Trucks
The combination flasher 11515961 has been replaced still no sgnals Fuses are all OK for both truck and trailer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There should also be a unit called the electronic flash module / unit. It should be somewhere under the driver's side dash.. unfortunately I do not know where in particular
Posted on Aug 13, 2009
I have seen once before that the fuse box was bad on a 2003 Dodge 3500. I had power in and nothing out. We had to replace the box. Not cheap! Hope it is simple like a loose connection though. I think I had to pull the inner fender on the drivers side to access the bottom of the fuse box. Pain in the ****, but...
Posted on Oct 01, 2009
I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING
Posted on Apr 01, 2010
Tips for a great answer:
Apr 02, 2017 | Cars & Trucks
Dec 15, 2015 | Nissan Cars & Trucks
Jul 03, 2017 | Cars & Trucks
Turn on the Durango and check each of the four turn signals
to make sure that the bulbs are not burned out. If you find one that has gone
out, replace the bulb and retest the turn signals. When a bulb goes bad on this
circuit, the resulting operation can mimic a bad flasher or one that is
Locate the combination turn signal flasher and relay. It is
on the left end of the driver's dash. Open the access door and view the
collection of relays and fuses. At the left side of the mounting block is a
larger flasher and relay. This is the combination turn signal flasher and
the relay by placing you finger on the relay housing and activating the turn
signal. If you have found the right one, you should feel a clicking as the turn
signal blinks. Remove the relay, replace with the new relay and close the
Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.
Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks
Feb 08, 2012 | 2007 Suzuki Forenza Sedan
Jan 03, 2010 | 2007 Chrysler Pacifica FWD New Cars
Jul 21, 2009 | 2001 Chevrolet Tahoe
Apr 12, 2009 | 1993 Dodge Shadow
Jan 26, 2009 | 1995 GMC Jimmy
Dec 17, 2017 | Dodge Cars & Trucks
43 people viewed this question
Usually answered in minutes!