Question about 2006 Chevrolet Impala

Open Question

My 2006 Chevy impala will not start you hear a clicking sound when you turn the key. Lights,radio and window works

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2006 chevy cobalt woulnt start lock light is on

Are you using the original key that came with the car? The chip in that key may have gone bad. Try using the spare key that should have come with the purchase of the car. You may also be having battery issues. If all else fails....call the people who really know how to rape you...DUM Dum dummmmm....the dealer

Posted on Dec 31, 2008

Ad
bunnydawg
  • 5158 Answers

SOURCE: 2001 chevy impala gas gage probiem, when you turn

check the relay for the fuel guage. if it's not labeled let me know i'll try and find which one it is

Posted on Apr 15, 2009

emissionwiz
  • 76846 Answers

SOURCE: How do I program my key for my 2006 Chevy Impala?

Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.
Originate New Master Key (PK3 or PK3+ key)

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position.
The security light on the dash will illuminate and stay on for ten minutes.
2. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back to the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
3. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back on the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
4. After the security light has gone off the third time, the key has been programmed
into the vehicle’s computer and will operate the car. It has replaced ALL the
previous electronic key codes and is the ONLY key programmed into the
vehicle’s computer.

Add Duplicate Key (PK3 or PK3+ key)

1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

Posted on May 20, 2009

  • 10 Answers

SOURCE: 2000 chevy cavalier wont turn over, lights and radio work

The starter motor on a car takes a lot of energy, you may be able to use the radio but not have enough power for the starter. You also might not be able to start it because the motor's starter or it's relay is bad. So here's what to do:

Check the connections on the battery, try loosening the connections and moving them around a bit, then tighten them down good.

Next go try to start it up again. If it still doesn't respond, turn your headlights on and see if they are still bright. If they are, then I would look into the starter or the starter relay.

The relay is in a box somewhere under your hood, possibly with some motor related fuses. Take the cover off and look at the under side of it. The cover should have a sticker displaying which relays do what. Now look for the air conditioner relay. Check to see if the air conditioner and starter relays have the same number printed or stamped on them. ONLY if the numbers mach, put the air conditioner relay in place of the starter relay, and try to start it again.

If you still get nothing, then it is either a bad starter or wire somewhere. On this car it may be a bit difficult to find and reach, but try to get to the starter on the bottom of the car. You can find pictures online of what it looks like if you are not sure. Play with the wires and knock on the starter with something hard like a rock or hammer. It doesn't take too much to do it, even a firm punch can do it, just don't break it. If this works then the starter is bad and needs serviced or replaced.

If there is still no response after this, there is nothing more you can do unless you are capable of taking things apart and checking the wiring. Good luck!

Posted on Aug 07, 2009

dmfixit
  • 226 Answers

SOURCE: My 1995 Chevy Lumina will not start

sounds like you have a lame solenoid on the starter .i'd start there.get a voltage tester and test for 12 volts at the solenoid terminal if there is 12 volts and the starter still doest engage when you hit the key test the ignition wire on the solenoid when you turn the key it should apply 12 volts as well .if works then take the starter out and find a good repair shop and try a new solenoid first then the starter is next to test .

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio sound sometimes and not


IF the speakers are in the doors then the wiring harness in the door-jam is frayed, and you must cut the rubber to access the wires between the door and the door jam to get at the wires without taking the door apart.

Apr 21, 2014 | 2004 Chevrolet Impala

1 Answer

I have a 2007 impala it will not start no clicking, all the lights come on. When the key is turned lights and radio cuts off, just bought my battery a month ago


Sounds like a bad alternator. Boost vehicle, if starts disconnect from boost vehicle, run Impala for a few minutes then disconnect positive on battery, if Impala stops running likely the alternator no good, replace it.

Nov 30, 2013 | Cars & Trucks

1 Answer

I have been having the same problem for 4 months and havent really found out what's goin wit it. it keep say egine power reduce i have a 08 chevy impala.what do you think it is?do you think i should...


I have an 06 Impala LT. Just out of the blue my car wont start. Everything else comes on radio,lights, etc. When I turn the key it kind of makes a loud thumping sound. I had the conclusion of maybe in need of a new battery or something more serious....any suggestions?

Aug 13, 2011 | 2006 Chevrolet Impala

1 Answer

I have a 2000 toyota camry. I turn the key on, dash board lights come on but the engine wont turn. checked the battery, fuses. they are good. could it be the alternator.


Did you have the battery checked by a doing a load test? Do you hear a "clicking" sound when you turn the key to start? If you hear a clicking sound, and you're positive the battery is good (fully charged) it could indicate a bad starter solenoid.

By the way....what kind of vehicle is it....a 00 Camry or an 04 Impala?

Jan 24, 2011 | 2004 Chevrolet Impala

1 Answer

My 2001 chevy impala will not start. when you turn the key it wont turn over.


Is the battery dead? Do you have working headlights? Have you had any starter problems, has it been hard to start lately and now won't turn over? turn your head lights on and try to start the car, have someone watch the lights to see if they dim when you turn the key on, if they do then I would suspect the battery. If the battery is charged and it still won't turn over, listen far any clicking sounds or grinding sounds. tis would indicate a problem with the starter. If the starter is good then check your fuses and see if you have a blow fuse to the ignition system.

Nov 25, 2010 | 2001 Chevrolet Impala

3 Answers

2005 chevy impala: How do I shut off "low tire pressure" warning light?


Turn your car ignition on but dont start it. Then pull your lights out one click push back in repeat process two more times and you should hear a chime and it will reset. I've had to do this lol

Aug 15, 2010 | 2005 Chevrolet Impala

2 Answers

2001 chevy impala security light keeps coming on


This is a problem with chevy vehicles that have the system theft light. after a couple of years of using the key, the lock tumblers inside the ignition switch tend to wear out and so causing the system to think it's being stolen. Now you have to put the key in and turn the ignition to the on position, without cranking the car and leave it for 10 minutes until the theft light goes out. Very annoying especially if you're in a hurry. The dealer cost to repair the ignition switch goes for about $600-$800. that includes re-teaching the key.

Feb 11, 2010 | 2001 Chevrolet Impala

3 Answers

2001 Chevy Impala won't start


If the battery has gone dead, it could cause the security system to go into full lock-up mode. If it has locked up the accessories will work after the battery is charged back up , but the power to the starter will be cut off and it wont turn over. You need to do the 30 minute learn procedure. A GM dealer will print it out for you and you can do it yourself. It's very simple if you follow the procedure exact. hope this helps and good luck.

Feb 21, 2009 | 2001 Chevrolet Impala

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...