Question about 2010 Hyundai i20 1.2i

Open Question

Hyundai i20 2010 model brake lights do not work

The high mounted brake light works but the other two don't, i have replaced globes and checked the fuses.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 2006 Hyundai Sonata brake light problem

there is a tsb for the brake switch in 06 sonatas. it must be adjusted or replaced by dealership. is your check engine light on, if so its probably code p0504

Posted on Jun 29, 2008

  • 101 Answers

SOURCE: Brake Lights Out

Hi welcome to fixya.com
Try putting on your flashers,and see if they come on.
Sounds like a loose groung wire usually green.They need to contact bare metal.lots of times they just need retighting.

Posted on Dec 17, 2008

  • 88 Answers

SOURCE: hyundai accent 2006 brake lights not working

brake light switch under the brake pedal. COMMON PROBLEM OF ACCENTS. 15 TO 20 BUCKS

Posted on Dec 23, 2008

  • 87 Answers

SOURCE: High mount brake light

Hi i would take it to the dealer. they are really hard to do and thay take me almost and hour.

Posted on Mar 28, 2009

232K7
  • 26 Answers

SOURCE: Hyundai 2006 Sonata high mount brake light.

the rear seat does NOT have to be removed in order to replace the stoplamp and/or its bulb.
you have to get into the trunk, and there are (2) philips screws holding the stoplamp secured to the package tray. the actual process takes about 15 minutes, because to do it right you have to actually get IN the trunk.

the price they charged you sounds about right if the price of the stoplamp is included, dealerships tend to overcharge for parts.

Posted on Apr 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Roof break light not working globe is 100%


Check first to verify the light fixture is getting power and if not replace the fuse for the high mount light, if it blows again disconnect the light and try another fuse, if that works then the fixture is shorted.. This is a separate fuse from the main brake lights

Mar 21, 2017 | Cars & Trucks

1 Answer

Headlights wont work on 1998 mustang v6 Running lights brake lights and gauge lights work fine. The lights only trn on when i hold the high beam switch. Any suggestions?


check fuses and check globes . Globes might have two filaments and low beam ones has blown . Had this globe thing happen on two globes at the same time on Ford Falcon's Halogon globe headlights.

May 05, 2014 | Cars & Trucks

1 Answer

2004 ford mustang mach 1 brake lights dont work dont have manual to change the fuse


I don't believe there is a separate fuse for the high-mount brake light. Never was on older cars, that brake light is just spliced into the rear brake lights. Have you checked the bulb?

Jul 11, 2012 | Cars & Trucks

1 Answer

Is there a fuse or relay or micro relay for the CHMSL on 98 sts


check the lt blue wire at upper lamp,(under trunk lid trim panel) for 12 volts when brake is applied. if no voltage,check same color wire at brake lamp switch for voltage.(by brake pedal).if no voltage replace stop lamp switch asm. if voltage is detected at rear by lamp then replace CHMSL asm.(center high mount stop lamp). this lamp is made of many LED's,if some work and some don't you will need to replace lamp asm. can be repaired by a trained GM tech, possibly. there is no seperate fuse or relay for this lamp,only a stop lamp fuse.

Nov 12, 2011 | 1998 Cadillac Seville

2 Answers

Brake lights dont work Bulbs are good and brake light switch is good


The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!

Aug 28, 2011 | 1992 Subaru Legacy

1 Answer

Fthe tail light works but the brake light doesn't work, it probably is the module that has a circuit board. I have replaced it 2 or 3 times on my 2004 XL Envoy ... can I get a part number and location...


First let's determine which brake lights are not working. Does the high mounted brake light work? Do both left and right brake light not work? If none of the brake light work, the problem could be the brake light switch at the brake pedal OR fuse #12 in the underhood fuse panel.
If only the bake lights at the corner lamp assembly don't work, check fuse #34 in the rear fuse panel.
The module your are referring to is the circuit board located in each of the corner lamp assemblies, check on website www.compnine.com for the part number of this item. I don't believe this is your problem though.

Jul 25, 2011 | 2004 GMC Envoy

1 Answer

No brake lights check fuses no blown fuses but the center brake light work


If the center high mount brake light comes on when brake pedal is depressed, and the rear brakes don`t come on, and the fuses are not blown, then I would replace the rear bulbs.

May 02, 2011 | 2009 Nissan Altima

1 Answer

1999 GMC Envoy: replaced both GE 3057 lamps in left rear light assembly. Lamps both light. However depressing brake pedal does not initiate brake light. The righ rear brake light does work. The high mount...


The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. As for the left rear bulbs not working when depressing brake pedal, check the bulbs again for any spring that may be broken. If the bulbs are still good, make sure there is sufficient contact with the socket. If still not working, have someone check it out further.

Feb 15, 2010 | 1999 GMC Jimmy

1 Answer

2001 Corolla S only brake lights in back do not work window does


change the globes they may look alright but probably wont be or if you have a circit tester check to see if power getting to globe connecter but i reckon your globes

Jul 27, 2009 | 2001 Toyota Corolla

1 Answer

2002 Camry Brake lights


sounds like you nee a couple of new globes

Dec 07, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
2010 Hyundai i20 1.2i Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...