Question about 2002 Dodge Stratus

Open Question

No spark replaced cam sensor and coil pack still no spark

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

justuscc
  • 360 Answers

SOURCE: No Start, No Spark, for Grand Caravan 3.8L

we get remans bad out of the box......... good luck

Posted on Sep 26, 2008

  • 512 Answers

SOURCE: 1996 1500 ram wont start

there is also a crank sensor that can keep it from sparking. are you getting voltage to the coil

Posted on Jan 03, 2009

  • 691 Answers

SOURCE: 1999 dodge caravan new pcm new crank and cam

If you have replace new cam sensor with no sparks and the coil are good putting out 12 volt, my guess would be the computer it self faulty. cam sensor sense the cam turning and send info to computer telling computer to disperse the charge from the coil pack to the plugs assuming relay, cam sensor, coil, plugs, and wires are good. make sure the cam sensor is put in properly and position.

Posted on Aug 28, 2009

dmftrucker
  • 1922 Answers

SOURCE: cranks and no spark no power at coil pack

i believe this line is fused from the E.C.M.,go to your local library and find a chilton's auto manual,this will tell you for sure

Posted on Aug 31, 2009

jcampo1000
  • 165 Answers

SOURCE: i have no spark on

yes def change crank sensor that controls the coil on wen to spark... cam sensr usually controls injector pulse.... good luck

Posted on May 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 91 eagle talon won't get a spark it just cranks


try crank position sensor.cam sensors are mostly for monitoring misfires. cam sensor doesnt determine spark timing

Dec 17, 2011 | 1991 Eagle Talon

1 Answer

We replaced the Water pump and Timing belt on a 1999 Plymouth Neon 2.0 Single Overhead Cam Engine. Engine Cranks, Is getting Fuel...but no spark. We changed the Coil Pack. It still cranks, but no...


If its not getting spark the choices are limited. You already replaced the coil pack so whats left is ignition module, crank sensor, knock sensor, cam sensor, or the timing was not was not set properly when putting it back together. Any one of those would create a no spark situation.

Mar 17, 2011 | 1999 Plymouth Neon

2 Answers

How to replace spark plugs on 2000 jeep cherokee classic 6 cyl.? Also does 2000 cherokee have inline fuel filter?


TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.

Jul 20, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2000 safari van no spark to spark plugs turns over but won't fire


Sounds like it is either a bad coil pack, cam position sensor or crank position sensor. The coil pack delivers the spark to the plugs and the 2 sensors tell the computer when to tell the coil pack to spark.

Jun 05, 2010 | 2001 GMC Safari

4 Answers

I have a 1992 cutless with a 3300 engine it was running last night when i came out this morning it would not start. first thing that i check was it getting fuel, yes i took off one of the wires going to...


These have a magnet on the cam sprocket, these magnets tend to fall out of the little plastic retainer. If the coil pack is good, and the ignition module good then it will prob. be the cam sensor pick up magnet. Unfortunately the timing cover will need to come off in order to access the gear. While all of this removed might as well replace the timing chain. Before tearing all this down have someone diag it to check the pulse width of the cam sensor, if you have no pulse then the magnet fell out. You may further verify by pulling the cam sensor and turning the engine until you can see the magnet or where it supposed to be, through the hole where the cam sensor goes.

Oct 03, 2009 | 1992 Oldsmobile Cutlass Ciera

2 Answers

1999 dodge caravan new pcm new crank and cam sensor new coil pack new flexplate still no spark, scannner show sync problem, any ideas


If you have replace new cam sensor with no sparks and the coil are good putting out 12 volt, my guess would be the computer it self faulty. cam sensor sense the cam turning and send info to computer telling computer to disperse the charge from the coil pack to the plugs assuming relay, cam sensor, coil, plugs, and wires are good. make sure the cam sensor is put in properly and position.

Aug 28, 2009 | 1999 Dodge Caravan

2 Answers

Please help


had the same problem in mine we found it was the cam shaft positioning sensor. my van had shut off and we had no current to plugs and at first thought coil pack but still nothing. no power to coil pack. then found sensor no good. also we replaced the sensor with an after market sensor and worked fine for couple months then started to shut off again. after a little research found we needed original cam shaft pos sen from dealer and since then no problems. hope this works for you.

Jun 19, 2009 | 1996 Dodge Caravan

1 Answer

1995 Elantra has no spark from plugs


A couple of Questions first. Over head cam? If over head does it have a belt? Have you checked fuses? You can check to see if you get a pulse at cam sensor. It will be in mill volts. You need to check power at coil and also going to cam sensor. Did it die quick or ? Check these then I'll get back.

Feb 15, 2009 | 1995 Hyundai Elantra

2 Answers

I cant get spark out of the coil pack


cam sensor fires the injectors to synchronise injector pulsing with the spark at the spark plugs.. U need to probably change the crankshaft sensor (around the crank pulley) as the crank sensor is what controls the ignition spark.
hope that does it.
:)

Jan 20, 2009 | 1996 Plymouth Voyager

Not finding what you are looking for?
2002 Dodge Stratus Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...