Question about BMW 5 Series
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: air bag code
Hi, ON your 2002 ford taurus, The Flashing code 33 ( B 2292 )
This code refer to : Driver side seat belt pretentioner ( seat belt bucklet) problem.
Check the conecctions under the driver seat.
Repair as need, and recheck if thi code is present.
But if you had an accident on you taurus. You need to replace the Seat belt Pretentioner ( seat belt bucklet)
OK. I hope this information work for you.
Posted on Jul 11, 2008
SOURCE: Air Bag Code
Code 52 relates to low voltage detected in a capacitor inside the airbag module. 45 seconds after key on, this capacitor should have a voltage of around 23 volts.
This capacitor stores energy to deploy the airbag in the case of a collision.
Because your airbag light is on, your system is deactivated (cannot deploy)
In your case, the airbag computer detects less than 23 volts at that capacitor 45 seconds after key on, and disables the system.
There is a diagnostic procedure involved in fixing this problem, but usually means a bad airbag module (computer)
This should only be checked by a qualified technician, as airbag service can be dangerous and there are strict procedures to follow so the bags don't inflate suddenly and cause injury.
Posted on Aug 27, 2008
SOURCE: airbag light staying on
You need to use VagCom (the Audi diagnostic software - available for free at www.ross-tech.com, and you'll need to buy a cable from eBay), and you can find out which bag is tripping the light. If you have side bags in the front seats, chances are it's one of those - moving the seat too far back or down can strain the connector under the seat and cause it to open just enough to trip the light (happens on the Audi A4 all the time - mine happened three times before I fixed it for good). Once you know which bag it is, you can fix it. If it's one of the seat bags, zip tie the connector tightly to hold it together. Under the seat, the airbag has its own separate connector, and it's yellow (by law, all airbag connectors are yellow). Zip-tie it tightly without pinching any wires, then turn off the light. You should be good to go after that.
Posted on Sep 01, 2008
SOURCE: Air Bag stay on BMW Z3 2003?
There must be a problem with the air bag system for the light to be on, if the system was o.k. the light would be off and have a stored code. You cannot reset this light with a generic obd2 scanner. You need to access the air bag system and read what codes it has stored. Good Luck.
Posted on Feb 12, 2009
In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury or death.
Posted on May 20, 2009
Tips for a great answer:
Apr 21, 2015 | 2000 BMW 3 Series
Aug 14, 2011 | 1997 BMW 318
Nov 18, 2010 | 1994 BMW 5 Series
Jun 15, 2010 | 2000 BMW 3 Series
Feb 02, 2010 | 2000 BMW 3 Series
Oct 14, 2009 | 1999 BMW 328 Series
Oct 12, 2009 | 1999 BMW 323 Series
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: