Question about 2002 Buick Rendezvous
Have a load test done on the battery as it indicates a dead cell . Check that the battery posts and terminals are shiny clean and tight. There is no real life span on batteries and that is what warranties are for.
Posted on Feb 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 Buick Rendezvous Error
I have had simlar issues. The first thing to try is to diconnect the positive lead from teh battery. Be careful as there are some issuesd surrounding OEM batteries in the 02. after about 30 secs reconnect the cable. This will "reset" your system and if it is just a glitch, the problem should be gone. If this does not fix the problem it is most likely your intrument cluster, however it can also be the BCM (Body Control Module). Have a dealer check it out for you. Before you buy a replacment part from the dealer chaeck out the prices at newgmparts.com or Rock Auto, both saved me 50% or more when I needed to have these items replaced.
Posted on Sep 23, 2008
hi im wes the o2 sensor is always in the exaust newer buicks have one before the converter (sometimes in the exaust manifold) one after the converter if it has duall exaust it could have four
left bank sensor one is before the converter on drivers side bank two sensor 2 would be passanger side after the converter does this help?
Posted on Mar 12, 2009
look for rear wiper fuse and relay.because both circuits is tie together . look in glove compartment for the manual .it will show where all fuses and relays located.
Posted on Apr 07, 2009
the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.
Posted on Sep 11, 2009
Testimonial: "ok...i bought the bcm on line (used)...but the gays in the dealer says i have to buy a new one..because the used cannot be to reflashed...or recoded."
u can do this by disconnectiong the battery negative cable for 5 minutes or use an electronic scanner to clear the light and the ciode for the light
Posted on Jun 05, 2010
Tips for a great answer:
Oct 08, 2016 | 2002 Buick Rendezvous
Jan 27, 2013 | 2002 Buick Rendezvous
Aug 06, 2012 | 2004 Buick Rendezvous
Jun 05, 2011 | 2002 Buick Rendezvous
Feb 14, 2011 | 2002 Buick Rendezvous
Sep 22, 2010 | 2002 Buick Rendezvous
Jan 26, 2010 | 2002 Buick Rendezvous
Sep 29, 2009 | 2002 Buick Rendezvous
Sep 15, 2009 | 2002 Buick Rendezvous
Sep 06, 2009 | 2005 Buick Rendezvous
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: