Question about 1998 Honda CR-V

1 Answer

Torque sepec flywheel to torque converter bolts

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

It's in the fsm. or at all data.com , all the time, ... no need to guess.
or here.
buy one, or
hope this free one is complete.

http://hondatech.info/downloads/Auto/Manuals/CR-V/


good luck .

Posted on Feb 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How many ft/lbs of torque is recommended on the flywheel bolts when installing the flywheel on a 1996 GMC Sierra Z-71 4x4 5.7L engine?


GMC Sierra Bolt Torque Specifications. ... The torque converter bolts to the flywheel with 46 foot-lbs. of torque. ... 1996 GMC Sierra Horsepower Torque Specs.

May 02, 2014 | Cars & Trucks

1 Answer

2001 tiburon


Torque converters are bolted up to the flywheel or flexplate. Probably 4 or 6 bolts from the flywheel engine side into the torque converter.

May 03, 2012 | 2001 Hyundai Tiburon

1 Answer

Need to know the torque on the bolts from the flywheel to the torque convertor


Install torque converter attaching bolts. Tighten bolts to following torque:

40 ft. lbs. (54 Nm) with 9.5 in. 3-lug converter
55 ft. lbs. (74 Nm) with 9.5 in. 4-lug converter
55 ft. lbs. (74 Nm) with 10.0 in. 4-lug converter
270 in. lbs. (31 Nm) with 10.75 in. 4-lug converter

I hope this helps.

Aug 26, 2011 | 2002 Jeep Liberty

1 Answer

Im looking for the specs for a 1999 accent torque converter bolts


Please don't forget to rate! Thanks!

  • Transaxle mount and torque the bolts to 65-80 ft. lbs. (90-110 Nm)
  • Torque converter and torque the bolts to 34-39 ft. lbs. (46-53 Nm)
  • Flywheel cover and torque the bolts to 72-84 inch lbs. (8-10 Nm)
  • May 12, 2011 | Hyundai Accent Cars & Trucks

    1 Answer

    How to remove a transmission for a 2002 GMC Yukon


    Removal & Installation 4L60E/4L65E To Remove:
    1. Remove or disconnect the following:
      • Transmission fluid
      • Transmission oil level indicator tube and seal from the transmission
      • Plug the oil level indicator tube opening in the transmission.
      • Remove or disconnect the following:
      • Shift cable end from the transmission shift lever ball stud
      • If equipped with a transfer case, remove the front propeller shaft.
      • Rear propeller shaft.
    2. Plug the transmission oil cooler line connectors in the transmission case.
    3. Remove or disconnect the following:
      • Starter motor.
      • Transfer case, if equipped.
    4. Support the transmission with a transmission jack.
    5. Remove the transmission mount nuts.
    6. Remove the transmission crossmember.
    7. Remove or disconnect the following:
      • Torque converter access plug 4L60E/4L65E removal 9308kg37.gif

      • Flywheel to torque converter bolts
      • The two bolts securing the transmission rear mount to the transmission
      • The transmission vent hose, fuel lines, and the wiring harness from the transmission
      • The stud and the bolt securing the transmission to the engine
      • The six studs and one bolt securing the transmission to the engine. Install tool J21366 onto the transmission bell housing to retain the torque converter. Pull the transmission straight back.
      • The transmission from the vehicle
    8. Flush the transmission oil cooler and cooling lines when you remove the transmission.
    To Install:
    1. Install or connect the following:
      • Tool J21366 onto the transmission bell housing to retain the torque converter.
      • Support the transmission with a transmission jack.
    2. Raise the transmission into place and remove the tool from the transmission.
    3. Slide the transmission straight onto the locating pins while lining up the marks on the flywheel and the torque converter. The torque converter must be flush onto the flywheel and rotate freely by hand.
    4. Install or connect the following:
      • Six studs and one bolt securing the transmission to the engine. Tighten the studs and the bolt to 50 Nm (37 ft. lbs.).
      • Stud and bolt securing the transmission to the engine. Tighten the stud and the bolt to 50 Nm (37 ft. lbs.).
      • Flywheel to torque converter bolts. Tighten the stud and the bolt to 46 Nm (63 ft. lbs.).
      • Torque converter access plug.
      • Transmission vent hose, fuel lines, and the wiring harness to the transmission.
      • Two bolts securing the heat shield to the transmission. Tighten the bolt to 17 Nm (13 ft. lbs.).
      • Two bolts securing the transmission rear mount to the transmission. Tighten the bolts to 18 ft. lbs. (25 Nm).
      • Install the transmission crossmember. Tighten the nuts and bolts to 70 ft. lbs. (95 Nm).
    5. Remove the transmission jack from the transmission.
    6. Unplug the transmission oil cooler line connectors in the transmission case.
    7. Install or connect the following:
      • Starter
      • Transmission oil cooler lines to the transmission
      • If equipped with a transfer case, install the front propeller shaft.
      • The rear propeller shaft
      • The shift cable end to the transmission shift lever ball stud
    8. Unplug the oil level indicator tube opening in the transmission.
    9. Install the transmission oil level indicator tube and seal to the transmission.
    10. Tighten the oil pan bolts and fill the transmission with transmission fluid.
    11. Lower the vehicle.
    4L80E/4L85E To Remove:
    1. Remove or disconnect the following:
      • Transmission fluid
      • Transmission oil level indicator tube and seal from the transmission
    2. Plug the oil level indicator tube opening in the transmission.
    3. Remove or disconnect the following:
      • Shift cable from the transmission shift lever ball stud
      • If 4WD vehicle, remove the propeller shaft.
      • If RWD vehicle, remove the propeller shaft.
      • The transmission oil cooler lines from the transmission
    4. Plug the transmission oil cooler line connectors in the transmission case.
    5. Remove or disconnect the following:
      • Starter motor
    6. Support the transmission with a transmission jack.
    7. Remove or disconnect the following:
      • The two bolts securing the heat shield to the transmission
      • The transmission vent hose, fuel lines, and the wiring harness from the transmission
      • One nut and one bolt securing the transmission brace to the engine bracket and transmission
      • The two bolts securing the torque converter cover to the engine
      • The four bolts securing the torque converter cover to the transmission
      • The six flywheel to torque converter bolts
      • The two bolts and nut securing the transmission rear mount to the transmission
      • The stud and the bolt on the right side securing the transmission to the engine
      • The remaining six studs and the one bolt securing the transmission to the engine
      • Tool J21366 onto the transmission bell housing to retain the torque converter
      4L80E/4L85E removal 9308kg36.gif

    8. Pull the transmission straight back. Remove the transmission from the vehicle.
    9. Flush the transmission oil cooler and cooling lines when you remove the transmission.
    To Install:
    1. Install or connect the following:
      • Tool J21366 onto the transmission bell housing to retain the torque converter
    2. Support the transmission with a transmission jack.
    3. Raise the transmission into place and remove the tool from the transmission.
    4. Slide the transmission straight onto the locating pins while lining up the marks on the flywheel and the torque converter. The torque converter must be flush onto the flywheel and rotate freely by hand.
    5. Install or connect the following:
      • Six studs and one bolt securing the transmission to the engine. Tighten the studs and the bolt to 50 Nm (37 ft. lbs.).
      • The stud and bolt on the right side securing the transmission to the engine. Tighten the stud and the bolt to 50 Nm (37 ft. lbs.).
      • Six flywheel to torque converter bolts. Tighten the bolts to 60 Nm (44 ft. lbs.).
      • The two bolts securing the torque converter cover to the engine. Tighten the bolt to 50 Nm (37 ft. lbs.).
      • The four bolts securing the torque converter cover to the transmission. Tighten the stud and the bolt to 33 Nm (24 ft. lbs.).
      • The transmission vent hose, fuel lines, and the wiring harness to the transmission.
      • The two bolts securing the heat shield to the transmission. Tighten the bolt to 17 Nm (13 ft. lbs.).
      • The two bolts and nut securing the transmission rear mount to the transmission. Tighten the bolts and nut to 25 Nm (18 ft. lbs.).
      • The flywheel to torque converter bolts.
      • One nut and one bolt securing the transmission brace to the engine bracket and transmission. Tighten the bolts and nut to 50 Nm (37 ft. lbs.).
    6. Remove the transmission jack from the transmission.
    7. Install or connect the following:
      • Starter motor
    8. Unplug the transmission oil cooler line connectors in the transmission case.
    9. Connect the transmission oil cooler lines to the transmission.
    10. Install or connect the following:
      • The transfer case
      • The rear propeller shaft
      • The shift cable end to the transmission shift lever ball stud
    11. Unplug the oil level indicator tube opening in the transmission.
    12. Install the transmission oil level indicator tube and seal to the transmission.
    13. Tighten the oil pan bolts and fill the transmission with transmission fluid.
    14. Lower the vehicle.
    prev.gif next.gif

    Oct 12, 2010 | 2002 GMC Yukon XL

    1 Answer

    How do you change the flywheel?


    Pull the transmission back (or remove) enough to access the flywheel/ torque converter. Remove the converter from the flywheel, then you will see the flywheel bolts that mount the flywheel to the crankshaft--(I think there are 6). It is advisable to replace these bolts with new ones when reinstalling the flywheel, and be sure to get the proper torque spec for the bolts from autozone or a reputable shop and torque them sequencially correct and to the proper spec.

    Oct 03, 2010 | 1982 Chevrolet El Camino

    3 Answers

    Does a torque converter for a 1989 ford bronco trwo have antyhing to do with a fly wheel


    the torque converter bolts to the drive plate that supports the ring gear

    Mar 24, 2010 | 1989 Ford Bronco II

    1 Answer

    Bolt torque settings for fixing flywheel and torque convertor into GM700r4 gearbox. cheers


    flywheel bolts m8 torque to 65-70 ft lbs in america so take that and do a convert eh and torque convertor bolts chek too 20 no more!!

    Jan 15, 2010 | 1984 Chevrolet Chevy

    1 Answer

    How many bolts connect the flywheel to the torque converter?


    6 bolts connect the flywheel to the crankshaft
    If it has an automatic transmission the flexplate or flywheel has 6 bolts to connect it to the crankshaft and 4 more bolts to connect to the torque connverter

    Jul 25, 2009 | 1984 Ford Bronco II

    Not finding what you are looking for?
    1998 Honda CR-V Logo

    69 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...