Question about Nissan 200SX
When I drive my 200sx it seems the right front wheel will suddenly start shaking and jerking. It will only do it for a short time then it will stop. Then a little later it will do it again. Car does has alot of miles on it. I have checked the cvg joint, tie rod, sway bar etc. all seem to be tight and in working order. When it does it feels like it's gonna come off. The tire is in good shape. I'm at a loss. Any ideas?
Posted by Anonymous on
Jack the car up and give the see if the wheel has any movement left to right or top to bottom. If there is no movememnt then your cv joint is ok and tie rod is good. is the a noise when you make a tight turn left or right , it maybe a wheel bearing. Also you have checked the nuts on the wheel itself are all tight?
Posted on Jul 19, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
check the idler arm on the steering drag link
Posted on Nov 15, 2009
Testimonial: "Thanks I been busy I'll check it out this weekend and get back to you."
SOURCE: when driving down highway my
did you get it aligned !! if not, that may be why. good-day !! if you let go of steering wheel while going straight and it vears either way it means its out of alignment.
Posted on Jul 28, 2011
SOURCE: Vibration at 70 MPH.
Warped or out-of balance brake rotor? Also keep in mind that loose rear differential trailing arms that allow the rear differential to squirm around can also cause steering wheel shake.
Posted on May 19, 2012
Tips for a great answer:
Jun 26, 2017 | 1997 Honda CR-V
Mar 09, 2011 | 1991 Nissan Pickup
Dec 31, 2010 | 1997 Oldsmobile Achieva
Jul 27, 2010 | 2002 Nissan Sentra
Nov 20, 2009 | 2002 Nissan Sentra
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: