Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 2 fuse panels in the Denali.
One is a panel on the drivers side, its on the dash but facing the door.
The ohter is under the dash and above the pedals, this one is much tougher to access.
Your Owner's Manual should tell you where the fuses are that you need to access.
Posted on Oct 20, 2008
There's a lever that connects the driver-side rear shock to the Automatic Level Control module (the air compressor and the ride-height sensor). Disconnect the lever from the shock and rotate it up and hold it. The compressor should kick in when you hold in place after a few seconds. If it doesn't kick in, make sure your fuses and relays are good. Otherwise, you may have a failed ALC module/burned out air compressor (from the shocks being shot). After you replace the shocks (and after you recouped from the heart attack you had when you shelled out $500+ for each shock), replace the ALC module/compressor (it's all one unit), and test it - it should kick on when you rotate the lever up again.
Figure about $350 for the ALC module from your dealer, and make sure the part numbers match! Your truck came with an upgraded ALC module from the 2001-2004 module, which were prone to water damage.
Posted on Dec 30, 2008
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
Posted on Mar 16, 2009
SOURCE: 02 yukon denali xl wont start
Did you try to replace the starter cable? is the Truck turning over or just clicking.? If it's turning over and not starting. Best guess would be one of two things. Knock sensors Located under intake manifold. they get wet and deteriorate or the fuel pump. I've replaced all three on mine. 233k still running strong...
Posted on May 24, 2009
2003 GMC Yukon - My power mirrors stopped working.... all fuses have been checked and they are all good. Any ideas? These are the power folding mirrors. The function that allows you to fold them in for car washes etc still works.... they just will not adjust when you change drivers, or when you try to adjust them with the controls. Any ideas would be appreciated!
Posted on Mar 19, 2010
Tips for a great answer:
Aug 08, 2015 | 2007 GMC Yukon XL Denali
Jan 05, 2014 | 2007 GMC Yukon XL Denali
Feb 15, 2013 | 2007 GMC Yukon XL Denali
Sep 17, 2012 | 2005 GMC Yukon
Apr 23, 2011 | 2007 GMC Yukon XL Denali
Oct 13, 2009 | 2007 GMC Yukon XL Denali
Jun 28, 2009 | 2006 GMC Yukon Xl Denali
Apr 20, 2009 | 2005 GMC Yukon Xl Denali
85 people viewed this question
Usually answered in minutes!