Question about Cars & Trucks

Open Question

Ford v10 misfire five codes p0360 p1151 p0302 p0310 p0305

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 116 Answers

SOURCE: 98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+

po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Posted on Dec 15, 2008

  • 1 Answer

SOURCE: intermittant p0302,p0305 codes misfires

1990 olds cutlass ciera misfire

Posted on Jan 15, 2010

dttech
  • 4803 Answers

SOURCE: p0136 p0156 p0401 p0402 p1131 p1151 p0171 p0174

All of that going on all at the same time is not likely at all. Are you sure the engine is actually overheating or is that just what your instrument panel is telling you?
With all of those things going on at the same time, here is what I would do. First I would take a REAL HARD look at the charging system. Goofy stuff like this is often caused by a battery with a shorted cell or an alternator with bad diodes that is feeding AC current into the computer network. The computers tend to do really goofy things when they are suffering from malnutrition.

Once I am satisfied that the charging system is in good condition, then I would clear the codes and go on a road test. If the check engine light comes back on, I would immediately scan the engine controller to find out which of the codes came back and fix it FIRST. Many times, fixing one code can fix ALL the codes. By doing it this way, you are more likely to find which one is your MAIN problem.

If your engine is actually overheating, all I can say is you need to diagnose your engine cooling system to find out why...all of the misfire codes could very likely be a result of the engine overheating and fixing the engine cooling system will most likely fix these codes.

Posted on Sep 28, 2011

emissionwiz
  • 75235 Answers

SOURCE: ford windstar trouble codes p0171-p0174- p1131-p1151-p0305

All these are fuel trim codes and fuel control O2 sensor related codes, you have something that is causing this as all the sensors seldom fail. My advice here is to see a Ford dealer for the diagnostics before any parts are replaced.

Posted on Jun 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 jeep liberty 3.7 code po300, po302 what does this mean


These numbers are OBD codes. They are misfire coding.
There is a youtube video to assist with troubleshooting.
Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

Good luck.
Semper Fi,
Z

Jun 04, 2017 | Jeep Cars & Trucks

1 Answer

What are the probable causes of DTC P0316?


The P0316 DTC code is a generic code that applies to all vehicles. This code means the powertrain control module (PCM) has detected a misfire shortly after startup, specifically within the first 1,000 revolutions. This code may also be triggered with another of the other misfire codes which are P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0309, P0310, P0311, P0312. If you have another misfire trouble code also, you should diagnose and repair that code(s) first. Symptoms Symptoms of a P0316 DTC may include: MIL (Malfunction indicator lamp) illumination Rough engine start or idle Potential Causes Potential causes of this misfire code may include: Damaged or defective Crankshaft Position Sensor (CKP) CKP sensor wiring or connector fault Poor fuel quality Ran out of fuel Ignition system malfunction Fuel system malfunction: injector or fuel pump Mechanical engine problem Damaged PCM Possible Solutions First off, you'll want to repair any other misfire DTC codes if present prior to diagnosing this code. If you own a Ford vehicle and you have a P0316 along with one of the other misfire codes, you should check for appropriate TSBs (technical service bulletins), as there are some TSBs that in part involve reprogramming the PCM. Doing that requires specialized equipment. Some Ford vehicles even needed a new cylinder head as a result of the valve. Regardless, if you have a Ford with multiple misfire codes including this one, check for TSBs. If the P0316 is the only code, then it's time to do a bit more diagnosing of the crankshaft and camshaft position sensors, and their associated connectors and wiring. A tip we've found is "Since this code indicates a start up misfire, pay attention to items which may expand or contract when cold (if the code sets when the engine is cold), or hot (if the code sets on a hot restart)." Realistically, the freeze frame data from the PCM will be helpful in tracking down the problem. As will a good DVOM (digital volt-ohm meter), so you can perform tests on the wiring and the sensors.

Read more at: http://www.obd-codes.com/p0316
Copyright OBD-Codes.com

Dec 10, 2015 | 2003 Ford Taurus

1 Answer

Misfire on #5 cyl


2005 Dodge Grand Caravan 3.8L engine misfire on cylinder 5.

answers.edmunds.com > Edmunds Answers
Aug 14, 2012 - MIL on; cylinder 5 misfire; most noticeable at idle in gear ... This could be caused by an EGR valve that is sticking partly open and not closing ...

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305
A P0305 code means that the the car's computer has detected that one of the engine'scylinders is not firing properly. In this case it's cylinder #5.

ODB Code P0305- Misfire in #5 Cylinder - 2008 Dodge ...

repairpal.com > ... > Grand Caravan > 2008 Dodge Grand Caravan
Feb 22, 2011 - ... do something with a misfire in the #5 cylinder of my V6 4.0L engine. ... ODB Code P0305- Misfire in #5 Cylinder on 2008 Dodge Grand Caravan .... My2005 dodge grand caravan jerks when it shifts into gear what could it be.

My Dodge Grand Caravan has a Cylinder 5 Misfire,? ' Yahoo An


Dec 05, 2015 | 2005 Dodge Grand Caravan

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

Engine light showing a P0302 and P0305 what are rhey


Those Codes are cylinder misfires for
cyl #2 & #5

I doubt you have 2 bad COP Ignition Coils,
but you have to test all of them,to know

Mar 24, 2011 | 2002 Ford Escape

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

3 Answers

I have a 05 VW Pessat with a 1.8L 65K miles on it. I have a random misfire and surge at idle. Code's set: P0300, P0301, P0302 and I seen P0303. This misfire comes and goes. Does not have a dead miss. I...


Try the crank pisition sensor that is vary likely to be the couse of your misfires its working but its intermintly shorting out telling the pcm that you have a misfire and setting the codes

Nov 22, 2010 | 2004 Volkswagen Passat

2 Answers

Intermittant p0302,p0305 codes misfires


A code P0305 may mean that one or more of the following has happened:
· Faulty spark plug or wire
· Faulty coil (pack)
· Faulty oxygen sensor (s)
· Faulty fuel injector
· Burned exhaust valve
· Faulty catalytic converter(s)
· Running out of fuel
· Poor compression
· Defective computer

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires , distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad, especially given you had water issues. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced.
I've also heard in other cases the problems were faulty fuel injectors.

Nov 10, 2009 | 1996 Oldsmobile Cutlass Ciera

2 Answers

98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+


po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Dec 15, 2008 | 2003 Ford E250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...