Question about Mazda B2200

1 Answer

Truck hook up lights trailer

1988 b200. The trailer lights are not responding when plugged into the receiver in the back bumper. Is this a fuse I need to replace? The lights and blinkers all work fine, just not on the trailer.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Mazda Master
  • 2,044 Answers

More than likely, you are experiencing a GROUNDING PROBLEM for the Trailer...

Posted on Feb 13, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1869 Answers

SOURCE: brake lights on GMC truck do not work replaced fuses & bulbs

ther is a switch called a brake lifgt switch that has a pin that is moved by your boot brake pedal arm.
the way it works is: when you press on the brake the brake pedal moves down and the spring in the switch pushes out closing the contacts to your brake lights the switch is located high up under the driver's side of the underside of the dash near or, on the brake pedal support replace or, adjust this switch

Posted on Apr 24, 2009

  • 676 Answers

SOURCE: 2005 silverado trailer wiring

You may want to get a ground loop isolator or even cheaper. Go to radio shack and buy two 1amp diodes and put them on each turn signal wire. This will eliminate the problem. The diode will be black with a gray line. the line will go towards the trailer on each wire. this should take care of the problem.

Posted on May 08, 2009

  • 1 Answer

SOURCE: Ford F-350 Trailer blinkers not working

Check the 20amp fuse that is in a small fuse box close to the fire wall and is mounted to the fender well. you will not find it in the power distribution box,,in my '97 ford pu is all by it self,and the small fuse box is about 3/4"W X 1/12L and it only has two fuses in it a 20amp wich that is the one you need to check and a 5 amp for a diferen purpose.let me know if it helps Email

Posted on Jun 11, 2009

  • 1071 Answers

SOURCE: 2007 dodge ram 2500 5.9 cummins. My brake lights

check your brake swithc it is up above brake pedal

Posted on Jul 23, 2009

  • 33 Answers

SOURCE: I hooked up my trailer lights everything works but my taillight

This year model truck has a different fuse for the trailer turn signals than your regualr turn signals. Check the fuse box under the hood for any burned out fuses. If not look under your truck and look at the wiring and make sure that there is no loose wires that may be grounded out. Also check for any looose wires on your trailer. I know that on a lott of trailers they ground out through the trailer ball but it would not be a bad idea to take the ground on your trailer plug (witch is normally is the white wire) and run it straight to your trailer and hard wire it witch means put an eye connector on the end of your ground wire and screwing or bolting it to a piece of metal on your trailer.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i repair the wiring from back bumper 7way plug to the fuses?

If the truck has stop lights and turn signals I would just replace the connector from the tail light connector plug at the back of the bed. Should be on the drivers side rear of the frame rail.

Aug 07, 2014 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

How do you hook up trailer lights so i can pull a trailer

If you bought the Honda hitch kit, a wiring harness and instructions are included. If you bought a different kit, buy the wiring harness from Honda. The harness connects to a plug located in one of the accesses panels in the back. You will have to take off the. Bumper facia to route the harness to the hitch. Be sure to use the rubber grommets to prevent the sheet metal of the rear quarter panel from wearing through the wire insulation and causing a blown fuse.

Aug 07, 2011 | 1997 Honda Passport

1 Answer

Now power to the trailor hook up on back bumper, fuses are O.k. wiring apears to be o.k. it is dodge ram 1500 4x 4 single cab c/w 4.7 8cly. be nice to get a wiring diagram. thanks Wayne

you will need to check the wiring under the bumper where the trailer wiring is with a test light and with the different lights will probably have to move back in the wiring by 6" and retest until you find were the loss of power don`t say if all the lights don`t work or just certain ones.the brown wire is the tail light,green is the right signal light,yellow is the left signal light and white is the ground could have broken wires at the trailer hook up itself.

Mar 22, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

2002 f350 diesel 4wd super duty towing package- damaged plug cover on rear bumper for 7way trailer lights- left turn signal on truck works fine front and rear- will not work at bumper...

Always check your ground FIRST. Nothing will ever work without having a good ground between the truck and trailer. Never concern yourself with the lights not working till you've assured a good ground is existing.

Jun 11, 2017 | Ford E-350 Super Duty Cars & Trucks

1 Answer

99 F-150 supercab 4x4. trying to hook up trailer

There are seperate fuses for each of the wires to the trailer plug; Right Brake/turn, Left Brake/turn, and lights.... Fuses are under the hood.

May 21, 2010 | 1999 Ford F150 Regular Cab

4 Answers

F150 Ford 1998 is there a fuse for a trailer and where is it located? Thank you

There are a few fuses for the trailer tow adapter.

1st, is theodd location on the 97-98, engine mini fuse panel has a 20 A fuse forthe stop / turn lamps. Have seen it covered in tape from the factory onsome 97-98 MY trucks.
This is on page 142 in the owners 1997 manual, all the revisions for the 1998 owners manual I have seen do not include this fuse box for some reason.

Download a PDF version from Ford, for the 1997 MY at :

This is a picture of the Power Distribution Box, additional relay box and engine mini fuse panel with the covers off. The 20A in the upper right panel with the red base, is the trailer stop/turn fuse.

The others :
1. Power Distribution Panel / engine compartment fuse panel
Fuse #1 - Trailer tow back-up and tail lamps
Fuse #16 - Trailer tow battery charge and stop/turn lamps
Fuse #28 - Trailer tow electronic brake

2. Instrument Panel Fuses ( cab fuse panel by hood release )
#23 - trailer tow battery charge relay

Nov 11, 2009 | 1998 Ford F150 Regular Cab

4 Answers

Trailer lights

This is the tow vehicle end. The brown wire ( #6 terminal) is the one to concentrate on. It must have a bad connection either in plug at bumper or wherever mounted, or follow it back toward front of vehicle, and will likely have a connector just behind bumper area, or up near frame as well. Best thing is to use a test light ($5-$10) and probe toward front until you get power showing, then work back to plug to isolate. Begin by checking terminal at plug with blinker on, if no flashing of test light, find brown wire on back of plug & test there, and keep going toward front of truck, especially concentrate on connection areas. Understand? If not, get back to me538a5b8.gif

Aug 29, 2009 | 2004 Dodge Ram 1500

1 Answer

I have a 6 p0le from the truck to a 7 pole on the camper how do i wire it so the backup lights work? its a 91 camper special

usually the trailer plug isnt wired for backup lights,i guess you will have to wire it manually,check the color of your wire to the backup lights of your truck,locate that wire underneath the back bumper and splice a wire to it to hook to your plug to the trailer.make sure the reverse wire from your trailer matches up with the terminal at your truck

May 08, 2009 | 1991 Chevrolet C/K 2500

1 Answer

Trailer lights

7 way connector, running lights, including license plate light, should be a brown wire. Check the back of the plug receiver on the truck, u are going to have to follow it to see if it's mashed, cut, not connected properly to connector, or loose, corroded, or dirty connections at any splice. That should be the problem. Let me know what u find.

Jan 14, 2009 | 1999 Ford F150 Regular Cab

1 Answer

Dash and tail light out

# 1 check fuse # 17 to see if it's blowed if so check the wire next to the back bumper and see if it's have a trailer hook-up put in if so unplug the hook-up and replug in the tail lights and replace the fuse and try that


Jul 31, 2008 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides