Question about 1993 Isuzu Rodeo

Open Question

HOW MANY GALLONS OF COOLANT OR WATER WILL A 460 FORD 1973 HOLD

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How much antifreeze do a 2000 ford expedition takes


5 gallons of fluid irrespective of how it is mixed. I answered this earlier for you didn't I with links to specs and videos of how to do it?

Spooky, it wasn't you! Look at this link there is lots of info.
http://www.fixya.com/cars/t26226280-many_gallons_antifreeze_goes_in_2002

Jun 26, 2016 | 2000 Ford Expedition

1 Answer

The coolant in mill should be mixed ratio 32 parts water and 1 part coolant.it has 99 gal and is 40% full.existing mixture has 23 pts water and 1 pt coolant.i have to get it back to 32 to 1


Add 38 gallons of water to the current mixture assuming you have a 250 gallon tank. This will bring your current ration back to 32 to 1

99 gallons / 23 = 4.3
4.3(32-23)=38.7

99 gallons + 38 gallons = 137 gallons.
250 gallons - 137 gallons = 113 gallons Left to fill
113/32 = 3.5

Add 3.5 gallons of coolant to the remaining 113 gallons of water needed to fill your tank completely.

Apr 17, 2016 | Cars & Trucks

1 Answer

We have a 1996 ford gulfstream ultra with no manual. It has a 460 engine, what is the fuel capacity and what can we expect for mpg?


I've seen them with 15 gallon tanks and 30 gallon tanks. You be lucky if you get more than 10 MPG.

Mar 01, 2015 | Ford Cars & Trucks

1 Answer

How many gallons of coolant does the northstar engine hold?


Coolant should be mixed in most cases to a 50% concentration, meaning one gallon of undiluted coolant will provide two gallons of diluted coolant. Most engines will hold 2-3 gallons of coolant mix. I normally purchase two gallons of undiluted coolant. I pour the first gallon of undiluted coolant into the radiator, then fill the empty bottle with water and add that to the radiator as well to make it a 50% mix.. Then, I pour half the second bottle of undiluted coolant into the empty coolant bottle, and then top both off with water to make two gallons of 50% mix. I then add coolant to the radiator as needed until full, keeping the remainder for topping off later as air purges itself form the system.

Sep 04, 2014 | 1997 Cadillac DeVille

1 Answer

1997 sentra holds how much antifreeze?


Out of antifreeze like you lost it all? Buy a gallon of full strength. Take it home and mix it with 1 gallon of water. Now you have 2 gallons. Assuming you didn't some how lose all of your coolant, this is more than enough for you. I don't think you can buy less than 1 gallon of coolant anyway.

Dec 10, 2013 | 1997 Nissan Sentra

1 Answer

How much coolant will it take to replace after flushung radiator on 2007 chevy impala


normally 2-3 gallons if you use the premixed 50/50 coolant, if you use straight coolant you will need to mix 50/50 with distilled water. the cooling system will hold approximately 3 gallons of coolant total

Mar 24, 2013 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

88 Ford Bronco II 2.9L I'm replacing my water pump


Buy a gallon of 100 percent,mix it 50-50 with water to make 2 gallons,may be enough.

Dec 22, 2012 | Cars & Trucks

1 Answer

How much fluid does a 1997 ford taurus radiator hold


Doesn't really matter
Buy one gallon coolant,mix with one gallon water or distilled water
Then,after draining,fill it

Oct 07, 2010 | 1997 Ford Taurus

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...