Question about 2006 Mitsubishi L200 2.5

Open Question

Interior lights clock & radio gone out - 2006 Mitsubishi L200 2.5

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fearghusq
  • 1 Answer

SOURCE: Radio, clock, interior light and central locking not working

This is as a result of a short occurring most likely in the radio harness.

It happened me while working on a customers car. In my case checked all fuses and they all appeared fine, both those under the hood/bonnet and those underneath the steering wheel.

After studying the workshop electrical schemmatics for the car it appears that the clock, interior lights, central locking receiver and radio permanent live/battery are all on the one line.

In effect damage had occurred after the internal fuse panel, therefore all fuses were ok and supplying power across them, but at some point after there was a break in the wire.

However you DO NOT need to remove dash and or replace harnesses to rectify.

Look at the fuse panel underneath the steering wheel. Slot 18 (bottom RHS) and you will see in raised plastic 'BACK UP'. Inserting a 10A fuse here will restore the interior lights, radio, clock and your central locking.

There is a small plastic piece in the way which prevents a fuse going in. Simply use a thin pair of pliers, scissors or a screwdriver (or similar tool) to break this and all pieces of it away until you are able to insert the 10A mini blade fuse.

Problem Sorted!

(I believe the fact this back up exists is because the designers of electrical system at mitsibushi realised it had shortcomings or this would be a potential problem - and included the back up for such an occurence)

Fearghus Quinn
(7 years experienced auto electrician & owner of Car Audio company in Perth Western Australia)

Posted on Sep 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I brighten clock light it's very dim?


Is your clock part of radio assembly? There is usually a dimmer control for interior lamps, you rotate it to brighten or dim interior lamps--dome--instrument cluster--radio illumination. The same thing should work for the clock. If clock is part of radio assembly, I guess you can remove radio and dig into it, see if you find the wiring for clock illumination.

Apr 16, 2016 | 2005 Buick Rendezvous

1 Answer

Radio, digital clock, interior lights all out


This is probably a single fuse out. Check the fuses under the dash on the driver side...should be number 11slot and a 15 amp

Apr 01, 2014 | 1990 Ford LTD Crown Victoria

1 Answer

Ingterior lights, clock and radio memory won't work on 1998 isuzu rodeo when key is not on


The radio receives power from the 15A AUDIO FUSE in the dash fuse box. The radio memory receives power from the 10A DOME LIGHT FUSE in the same box. The problems you note suggest the radio may have been misconnected at some point or there has been a fuse failure or there is a broken connection.

Dec 21, 2013 | 1998 Isuzu Rodeo

1 Answer

No radio, no interior light,


Is the clock showing the correct time? If not,the memory was dumped and the clock/radio must be re-coded to work,again.
If the battery light is ON,the main 100 AMP fuse is blown.it won't charge the battery.
Interior light? probably a blown fuse.

Nov 26, 2012 | 2001 Mazda MPV

1 Answer

Radio, clock and dome light not working


Had this before and i found a fault on the fuse board ,no supply the printed circuit maybe as i didnt go any further i just looped it from another fuse that had power via ignition switch through the radio fuse and it all worked but the fuse for the radio wasnt the one i looped as that had power for the memory it was another one that done the interior light and a thin bit of telephone wire done the trick so check all the fuses for power ,pull them out and check with a little 12v screwdriver light thing from the chinese shop ,right star trek is about to start goodnight

Mar 02, 2012 | 2001 Hyundai Elantra

1 Answer

Replaced ac condensor and now the radio, clock, interior lights won't turn on


Radio and clock/interior lights are two different circuits. Check your fuse block to see if it has power.

May 27, 2011 | 2005 Kia Spectra

3 Answers

Subaru Tribeca 2006; the radio stopped working the interiors lights don't turn on, the lights for the temperature gages don't turn on and the alarm system does not work. Also every time I turn on the car...


had the same problem. no radio, navigation interior lights etc. replaced 20 amp fuse labeled "back up" in the engine compartment fuse box and all checks good.

Nov 08, 2010 | 2006 Subaru B9 Tribeca

1 Answer

I bought a 96 jeep cherokee sport & the interior lights only come on for the front passenger door. the three other doors & the hatch dont turn on the interior lights & i cant find any fuse box...


Can you turn on the lights with the Interior light switch?. If a light works, obviously the fuse is good. You will need a wiring diagram and a test light to figure out where to start.

Aug 25, 2010 | 1996 Jeep Cherokee

1 Answer

What is the dimmer relay for?


look for a fuse that control the clock and interior light may be labeled int. light.Did you recently installa aaftermarket radio or anything having to be wired??

Apr 26, 2010 | 1991 Toyota Camry

2 Answers

The radio and the clock from tacoma 2002 did not


On most vehicle the fuse for the clock will be the same as the interior dome light. As for the radio should be a 10 amp fuse (red). Usually found on the interior fuse panel for both.

Nov 06, 2009 | 2002 Toyota Tacoma

Not finding what you are looking for?
2006 Mitsubishi L200 2.5 Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...