Question about 2000 Isuzu Trooper

1 Answer

Cranks no start, have fire to plugs. I have reading all this stuff on this site and fhave not found a solution. does anybody here know anything that actually works? 2000 Isuzu Rodeo 3.2 auto 4x4, tryi

I have reading all this stuff on this site and fhave not found a solution. does anybody here know anything that actually works? 2000 Isuzu Rodeo 3.2 auto 4x4, trying to get codes. There are no leads under left kick panel, I have 16 pin with leads going into 1,2,4,5,9,12,13 & 16. So, which ones do I bridge to get codes?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Isuzu Master
  • 2,044 Answers

Take this one step at a time:
(a) Does the vehicle start when you spray Starting Fluid into the Intake Air Hose?
If it does, then you need to figure out WHY it is not getting fuel. Possibilities are Clogged Fuel Filter, Bad Fuel Pump, Bad Crankshaft Sensor, Blown Fuel Pump Fuse or other Fuses too...
(b) Do you have a NOIDS Light to test the Fuel Injectors? This will also help you narrow down the troubleshooting

Posted on Feb 13, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires

Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Posted on Jul 05, 2008

Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine

Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Posted on Jul 06, 2008

  • 14585 Answers

SOURCE: how much does timing belt replacement cost on a

If you have it done right, ie replace all timing components and water pump if it's in there, it will be around $700.00

Posted on Jun 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 pt cruiser will not start. Seems to fire but won't start. Found some wires not attached to anything. Is there a kill switch somewhere.


What do you mean by seams to fire but won't Start ? When you turn the key to start what happens ? Does the starter spin the engine ? If so this would be a engine cranks , now if it does spin the engine an the engine doesn't start an run this is call an cranks no start condition .Now on the other hand if the starter doesn't spin the engine when you turn the key to start ,then this is referred to as a no crank - no start . There are very different diagnostic steps for each of these conditions . Your best bet is to have your vehicle diagnosed by a qualified technician .

May 24, 2016 | 2002 Chrysler PT Cruiser

1 Answer

89 camery no start , has fuel p.s.i. , injectors fireing , spark on all plugs , compression even across


Have you checked cam timing?If it has jumped a tooth or two it will not start.

Jun 18, 2017 | 1989 Toyota Camry

1 Answer

Car wont start


I finally found a mechanic who found 3 broken wires. The diagnostic machine now reads the car and no faults were found. He changed the fuel pump and the car now cranks but doesnt fire up. I got fed up with the mechanic scratching his heading after 3 weeks sat in his garage so i got the car back home. I changed the battery cos the old one was completely knackered. I need to get this started asap... any suggestions? its a 1.9 diesel

Feb 12, 2013 | Saab 93 Cars & Trucks

1 Answer

2001 Ford Escape starting problems


check for spark at the plug lead while cranking engine

Feb 11, 2013 | Ford Escape Cars & Trucks

1 Answer

My 2002 chevy 1500 van , 4.3 liter v6, will not fire. ran great, no signs of trouble leding up to now. Cranks,cranks, & cranks but no sputter, fire, anything


I would check and be sure I had fire to the plugs and fuel to the throttle body. I read what you wrote about the fuel pump but then on the end of the description where you put gas in the van the pump might not be working. If so you could have a bad wire to the fuel pump or a plugged fuel filter. Once you verify those items I would pull the 02 sensor ahead of the catalytic converter in the exhaust and make sure the cat or muffler is not plugged. If they are it will put back pressure on the engine and not allow fuel into the cyl. to fire.

May 23, 2017 | Chevrolet 1500 Cars & Trucks

1 Answer

My 90 acura integra wont start it turns over but wont fire i changed the distributor,and spark plugs,i am getting fuel but it just cranks and cranks but wont start,the cause i dont know was driving down...


Well, something is missing. Your engine needs fuel, ignition, and compression to run. You need to findout which of these systems is malfunctioning before anybody can tell you why your engine won't start.
If there is no spark, I would check the ignitor in the distributor first. There are other possible causes, but this isthe most common.

If there is no fuel, I would suspect a bad fuel pump. (you can check this by spraying a SMALL amount of starting fluid in the intake and see if the engine fires.

If there is no spark and no fuel, I would suspect a broken timing belt.

Feb 05, 2011 | 1992 Acura Integra Hatchback

1 Answer

Car cranks but will not start is there a way to find a code


there are always two things i look for first when a car won't start. gas and fire check the plugs to see if they are firing. take the plug wire off and put new plug in it hold close to the motor to see if it is firing while someone cranks the car them let me know

May 10, 2010 | 1999 Honda Civic

1 Answer

1999 suzuki esteem hard to start, just cranks and cranks. Runs perfect once started. Has new spark plugs oxygen sensor and cleaned injectors. Anybody know what problem is?


check to make sure the fuel pump,injectors and fuel pressure regulator don't have any internal leaks check the fuel pressure immediatlly after it is shut off and two hours later there should be at most a very slight difference

Sep 25, 2009 | 2000 Suzuki Esteem

Not finding what you are looking for?
2000 Isuzu Trooper Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...