Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: peugeot 206 glowplugs
If your not good at mechanicing I suggest you take the car to someone that is experenced.
The reason I say this that we have loads of cars into the workshop with glowpugs broken in the head of the engine with the result of us having to remove the cylinder head.
What happens is that the tip of the glowplug breaks in the head when being removed if it is not done properly.
There is a way that we have found that they can be removed easily without breaking them.
Firsty run the car engine until warm, then we pour a little Diesel fuel onto each plug & let them sit for 15mins or so.
Then we remove them with a deep socket 1/4" drive so we don't put to much pressure on them.
they should screw out easily but we turn them out 1 whole turn then back a 1/4 add a little more diesel ( thimble full) & gently screw them out.
If they start to get really tight screw in again a little then screw out again.
The nuts that hold on the wires just need to be nipped up with a small 8mm spanner, but do not over tighten.
Posted on Dec 11, 2008
wheel off remove the tin cap in the centure of the hub undo the big nut put the wheel back on with just 2 bolts finger tight so you can pull the hub off.once the hub is off take the 2 wheel bolts back out.now look in side the hub were the big nut was and you will see a sir clip take that out.then use a socket and a bench vice to press the old bearing out.use the socket and bench vice to put the new bearing back in.
Posted on Aug 01, 2009
SOURCE: peugeot 206 cc fan belt change
hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??
Posted on Dec 28, 2009
Tips for a great answer:
Oct 04, 2012 | 1999 Peugeot 206
Jun 26, 2012 | Cars & Trucks
Jun 14, 2012 | 1999 Peugeot 206
Mar 14, 2010 | 1991 Peugeot 405
Feb 06, 2010 | 2005 Peugeot 405
Jan 23, 2010 | Peugeot Liberte Cars & Trucks
Apr 25, 2009 | 1991 Peugeot 405
Apr 06, 2009 | 2006 Peugeot 405
Dec 12, 2017 | Audi Cars & Trucks
11 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: