Question about Toyota MR2

Open Question

93 MR2 non turbo fuel problem

Car has been left sit for a couple years. now it will start and run for a minute or two and stop. im sure it is fuel. the fuel pump relay is not in the engin bay and owners manual is useless. i have looked at drivers side kick board but nothing is marked. am i on the right track?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1114 Answers

SOURCE: Location of Fuel pump relay

more likely under hood in fuse relay cluster!usually around close to battery.

Posted on Dec 26, 2008

Ad
  • 3 Answers

SOURCE: 1993 f250 diesel engine won't start

my step dad had the same problem they said it was glow plugs but it was the cables to the glow plugs were messed up after that it runs great

Posted on Apr 09, 2009

MantoothAZ
  • 8 Answers

SOURCE: 2005 ford ranger fuel pump relay gets hot and engine dies

Like Laurie Mack said. It is the inertia switch below the glove box. Here is some funny information. DON'T change the fuel pump first. Interesting fact: I bought the new inertia switch from Ford and the install instructions that came with it said to install the switch in the protected area to the right where the fuses are. It is like Ford knows it was a dumb place to put the inertia switch, but they won't let you know until after you buy a new one. I have read at least 20 other people on here that had the same problem I just had.

Posted on Apr 14, 2009

  • 1 Answer

SOURCE: fuel pump still not working

I had the same proplem, remove spare tire and on the crossmember above it,left side, there is a fuel pump drive module. Mine was corroded and got moister in it .replaced it and runs fine. dealer price 110.00 dollors

Posted on Oct 02, 2009

  • 1 Answer

SOURCE: engine check lite saab 93 2.0l non turbo yr 2000

2005 93 1.9tdi vector sport just had the engine light on, loss of power and a whining from the engine....any ideas????

Posted on Feb 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 MR2 2.2L non turbo automatic transmission. My cars lights were left on, I was not present but they could not jump start the car. I replaced the battery and the car will not start. The da


trouble with this is. it can be the electrical part of the ignition switch needing changed..as has failed or beak in the wiring at the solenoid on top of the starter. is sticking .get someone to turn your key at the same time you hit the top of your solenoid .if it start that way .change the starter.

Dec 13, 2013 | 1991 Toyota MR2

1 Answer

Cant fine were the fuel pump relay is on my 91 mr2 2.2 non turbo


LOOK FOR FUEL PUMP FUSE LEFT SIDE KICK PANEL ON DRIVER SIDE.

Jan 19, 2011 | 1992 Toyota MR2

1 Answer

My 1992 toyota mr2 (non turbo) has been sitting for over a year. It was nearly out of gas when I parked it where it has been sitting. Now Im trying to get it started and wondering if the fuel injectors...


Pull the fuel tank and flush it out with clean fuel also flush the fuel system (replace fuel filter) and install fresh fuel, the injectors will likely be ok, the fuel pump is another question, make sure it is providing pressure.

Jun 29, 2017 | 1992 Toyota MR2

1 Answer

Hi I have just now noticed the MR2.Former Jeep owner but now have fallen for the MR2's 1991-1993 models.Cant drive a stick anymore so what concerns do the automatic transmissions have ? Any differences...


Hello, and welcome to FixYa. Please allow me to assist you.

The MR2 auto transaxles are very reliable units. Just change the ATF with the correct fluid every 30,000 miles. If it has high mileage, 90 + K miles, and is a dirty colour, I'd recommend a transmission flush. This will remove all of the dirty fluid from the system.

The MR2 non-turbo was a fun car, and had very few comon failures.

Try to stay away from the turbo cars, the turbos are know to fail, and the parts and labour to replace the turbo is very expensive.

The MR2s are rather quirky when it comes to servicing the cooling system, you have to bleed the air out. The necessary procedure is in the owner's manual, or online.

Other than those items, the MR2 is a very decent and reliable car. A little noisy, with the engine right behind you, but, that is part of the fun.

Thanks for choosing FixYa for assistance.

Jun 11, 2010 | 1986 Toyota MR2

1 Answer

A/c cooling fan for my 88 mr2 non turbo wont turn


Sounds like the condensor fan relay is "sticking" - you are sure this is the condensor fan, and not the radiator cooling fan? As electric radiator cooling fans often run after the car is turned off - this is normal - If you are sure it is the condensor fan and it is on with the AC off - Id bet it was the relay responsible (versus the AC control unit) - Locate and remove the relay - if you have a comparable one you can substitue (Make 100% sure it uses the same plug and wiring schematic) and try that - if it now works properly you can try to locate one at your parts store....Hope that helps some....DD

Sep 13, 2009 | 1988 Toyota MR2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...