Fob on my 2013 explorer stopped working

Ginko

• 19396 Answers
• Posted on Sep 13, 2008

SOURCE: porsche key fob

If the key had gone faulty, the key code must be re programmed on the vehicle computer. This can be done only using a PIWIS tool, available at the dealer or at a qualified Porche garage.
Try also the following reset:
turn ignition on,
turn off.
remove the transponder from the column
push any button on the fob within 6 seconds.
This procedure will reset the key synchronizing again with the vehicle computer.

SOURCE: renault megane key fob wont work

I had the same problem with mine

your key fob is now out of sync with the ECU to sync them just follow this link (renault will charge up to £180 for new key and to sync it)

http://renaulthelp.110mb.com/ImmBypass.html

Raygin

• 322 Answers
• Posted on Apr 07, 2009

SOURCE: How do I program S Type Jaguar key fob Year 2000 Jag ?

Seperate key fobs only can be programmed in the following way.

Turn ignition on/off 8 x times (allow all functions to stabilise) after the 9th on - press a button on both remote fobs. then turn ign. off. use good remote to lock and then try new remote to unlock/lock. sometimes it works first time - sometimes you have to repeat actions. good luck.

SOURCE: remote key fob stopped working not battery

try reprogramming.process widely available on these sites. 're-programming x-type key fobs'

SOURCE: renault key fob doesnt work

Hi.
I have a clio II, 2001, i have the same problem and i fixed it.
Don't know if will work for you but here it goes:

1 - no key in ingnition
2 - press the unlock button in console off the car for about 10 seconds(dont let go)
3 - it should work the central doors one time and then 2 times( hear)
4 - press the remote a few times until it starts working

It worked for me hope the same for you.
Please tell me if it worked and pass the message.

Good luck