Question about 2005 Toyota Corolla
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 corolla xrs slippage
It could be a case of a worn out clutch pads and lining, There is one adjustment for your clutch it is located under your dash, at the end of your clutch pedals arm and right about where the pedal arm pivots. You adjust it real slow, snall turn makes a big difference. good luck
Posted on Nov 30, 2008
I wouldn't say it is common. There are quite a few heat shields around the stock exhaust "header" and exhaust system. There are also FOUR motor mounts that you can check to see if all bolts are tight. They are all 14mm heads on the motor mounts, 12mm on the exhaust shields. These seem to be the main things that may get loose or make a rattling sound. The exhaust gasket is also designed to flex when the engine flexes - I would check into the exhaust. You have to remove the TRD strut bar to gain better access from above.
Posted on Feb 08, 2010
Tips for a great answer:
Oct 31, 2016 | 2005 Toyota Corolla XRS
Mar 07, 2015 | 2005 Toyota Corolla XRS
Jun 13, 2009 | 2005 Toyota Corolla
Nov 30, 2008 | 2005 Toyota Corolla
83 people viewed this question
Usually answered in minutes!