Question about Cars & Trucks

Open Question

Rear windows on my 09 Chevy Traverse won't go up Windows will go down but don't go back up Any suggestions on why windows don't go up?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Power windows roll down slowly

You can try a dry lube or lithium grease on the slow ones, but it sounds more like you need new window motors. Unfortunately Saturns are plastic cars, and... The window motors are not too difficult to change and it requires removing the outer door panel to make it easier to access.

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2010 chevy traverse right front window doesn't work, just makes buzzing noise from the switch, what causes this


Window is stuck and the noise is probably the window motor slipping on the drive gear. This will happen a lot with windows that are not used often or have dirt embedded in the channels, and exercising them once in a while is a good idea.

You should take it a shop to have it fixed. You can try opening the door and, with hand on each side of the window, try pushing down while pressing the down button to get it working. But be warned - if there is a mechanical problem, it may stick again in an open position and you may not be able to get it up.

Mar 10, 2017 | 2010 Chevrolet Traverse

1 Answer

What is usually the problem when the low oil pressure light comes on in a 09 Chevy traverse?


it could be low oil pressure, very dirty oil or a bad oil pressure sensor. usually its the oil pressure sensor.

Sep 09, 2014 | 2009 Chevrolet Traverse

2 Answers

Chevy Avalache 2007 blew a fuse while getting a jump, car won't start, rear windows and power locks don't work


You blew more than 1 .

The HUGE MAXI FUSE is probably burned... IF I remember correctly, it is a 80 or 100 Amp

Apr 06, 2013 | 2007 Chevrolet Avalanche LTZ

1 Answer

On my 09 Chevy Traverse if I change the o2 sensor will the check engine light go out or will it need to be reset?


The check light should go out IF the O2 Sensor
is the problem or only problem

No OBD Codes tell you what is wrong or what to
replace

Feb 28, 2013 | 2009 Chevrolet Traverse

3 Answers

On a chevy traverse i cant get the windows to work. i cant get key out of ignition, and right rear blinker doesnt work


Fuse under the right passenger dash. Fifth up on the right (blue 15 amp). It is called BCK/UP/STOP. All the same symptoms short in wiring harness for the trailer package caused the windows not to function, the right rear turn signal had no power, and the key was stuck in the ignition.
7_17_2017_9_57_25_pm.jpg

Dec 02, 2012 | Cars & Trucks

1 Answer

Crankshaft sensor location chevy traverse 09


I spent hours in engine and on the internet. I viewed 15 different sites with 15 different answers. Finally found it...The crankshaft position sensor on a 2009 Chevy Traverse (3.6 liter) is as follows: You need to jack up vehicle (or useramps) and climb under. You CANNOT access it from top (as many sites state). On the firewall (vehicle) side of motor, in the center, directly below the exhaust outlet, you will see a silver (aluminum) heat cover/plate. It is held on by 2 bolts. (one 15mm and one 10mm). The sensor is located benind this cover. Once you get this cover off, you will see two seperate sets of wires, wrapped in silver heat deflection tape. The set of wires that extends further to the left go to th CPS (sensor). I used a small extendable automotive mirror to see it. It is in a tight spot, but once you find it, it is easier to access than it looks!!! Took me about 30 minutes total to switch it out. Hope this helps !!! Good luck.

May 05, 2012 | 2009 Chevrolet Traverse

1 Answer

2006 325i BMW right rear window wont work up/down new motor/regulator.


For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html

-------------

Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.

Feb 12, 2012 | 2006 BMW 3 Series

1 Answer

None of the power windows work ona 1998 Cadillac STS. Checked the breaker under the back seat for continuity it's shows good. The power mirrors work fine and the rear window lock out light come


For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html

-------------

Complete Diagnosis & Testing Power Windows?
http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks

Feb 06, 2012 | 1998 Cadillac Seville

1 Answer

Chevy impala 2008 rear windows won't roll down all


Most cars these days have this designed into the window system. Its a safety issue and I'm afraid there may nothing you can do. If there is more window track below the bottom of the glass, look for stops bolted or rivited in the track. If so, you may be able to move them down. However, this is dependent upon the drive mechanism, which may also limit window travel.

Jul 31, 2011 | 2008 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...